Designer: Laurie White Star Rating: ***A 1:24 scale model of a harbour tug operating in the United Arab Emirates. This large tug is 40in long by 14in beam. Uses twin electric motors & displaces approx. 45lbs. Plan shows side & plan elevation. No model construction detail shown. ...

Alabama CSS MM1027 Designer: M Sterling Star Rating: *** The famous Confederate commerce raider of the American Civil War modelled to a hull length of 28.5in The drawing

Includes:: full size hull lines & deck detail etc & reduced scale sail plan. Suitable for a working power or sailing model though a false keel would probably be required for sailing. Featured in " The Model Boats Magazine" Jan 1969

...

Rob Cosman " The Alan Peters Approach" DVD 6 Ref: RCDVD In the shop with master craftsman Alan Peters, design & construction of fine furniture. This DVD from Rob Cosman is a tribute to the extraordinary skills of British master craftsman Alan Peters. 53 Minutes Available now!CODE RCDVD6 One DVD supplied ...

Albatross DVA (A01078) The Airfix 1/72 Albatross DVa from the plastic aircraft model range accurately recreates the real life World War I German fighter aircraft. This plastic aircraft kit requires paint & glue to complete. Three quarters of the German Ace, Manfred Von Richthofens, The Red Baron, victories were scored whilst flying the very succesful Albatross. He was killed when on an operation in a Dva. Scale: 1:72 ...

The decal set enables you to build the model of a Fw 190A-8 that belonged to the JG 10, based in autumn 1944 in Parchim, North Germany (see the scheme on the box cover) or a Fw 190A-7, one of machines flown in April 1944 by Major Heinz Bär, commander of the II/JG 1 (colour side view). Spec Check Wing span: 850 mm Length: 730 mm Wing area: 12, 0 dm 2 El. motor: (Not Included) series 280, 300, 330, MPJ, Mega, AXI ACWeight: max. 440 g Controls: Elevator, ailerons, motor (Radio Not Included) The model is not suited for complete beginners, but its control with ailerons & elevator would not bring problems to any modeller experienced enough with elevator/rudder control models, e.g. slow-flyers. The flying qualities & performance of this scale model of the Fw 190A-8 are close to that of much larger model, i.e. it is more docile, & flying it provides fine & substantially more colourful experience. The model kit you have bought has several typical
Features: The semi scale model is almost finished; you only have to apply decals, install the propulsion unit & the RC equipment. You can utilise the kit’s box as the transport & storage container for the finished model. The scale model is moulded from the extruded polystyrene foam (EPSF) with a tougher surface layer, making the model less prone to surface damage. Adding to that, all exposed surfaces are reinforced with plastic covers. Thanks to the ratio of the all-up weight & of the strength of the material used the model is quite compact, this feature reducing the danger of damage in normal operation substantially, to almost negligible level. When designing this model a maximum attention was devoted to its aerodynamic layout (e.g. the semi-symmetrical wing section, the symmetrical horizontal tail section), ensuring high aerodynamic finesse, with the resulting wide band of operational speeds & docile flying characteristics typical for large models. The range of proven power units offered enables to build a scale model possessing a flight performance corresponding to that of the best slow flyers, as well as to the fully aerobatic models. To control the model you need the RC equipment suitable for controlling the slow-flyers – it would enable you to fly majority of the aerobatic figures (with the possible exception of those that require the rudder control). One of the decisive factors, affecting the flight performance & behaviour of the model, is its weight. Due to the multitude of possible combinations of the RC equipment, motors & power sources (battery packs) it is impossible to exactly state the final weight. In any case, the weight of the model without the battery pack should not exceed 320 grams. With a double-cell Li Pol 1500m Ah battery would probably weigh in at 380 grams, with the six-cell 500m Ah Ni Cd pack about 420 grams. The specified maximum weight should in no case be exceeded – the flight behaviour of heavier models deteriorates accordingly. Model: Alfa Model Focke Wulf Fw 190A-8 Scale Airplane Part No: AM0205
...

Two fully detailed sheets showing internal & external profile & plan views. Sections, hull lines, plating, hull openings etc. Small detailed drawings of M/S fittings, armament, Type 271 radar lantern, PAC fittings, camouflage schemes, as modified in the 1950s. Completely redrawn from my first drawing of 1971 Two large sheets, hull lines included. See L/S/91 A
- E of HMS LARNE. Scale 1/16-in. per ft, 1: 192. Drawn August 1980.
...

Alien Invader (Classic) Skill Lvl 2 D-ES3003 The Alien Invader is yet another great rocket from days gone by. Another great addition to our Classic Series line, this rocket is a must-have for all serious rocketeers! Estes is once again proud to reintroduce you to another Classic!A high quality plastic nose cone, laser cut balsa fins & waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic kit. ...