Albatross DVA (A01078) The Airfix 1/72 Albatross DVa from the plastic aircraft model range accurately recreates the real life World War I German fighter aircraft. This plastic aircraft kit requires paint & glue to complete. Three quarters of the German Ace, Manfred Von Richthofens, The Red Baron, victories were scored whilst flying the very succesful Albatross. He was killed when on an operation in a Dva. Scale: 1:72 ...

Tamiya 1:24th scale Alfa Guilia Sprint GTA Model Car Kit (89677) Tamiyas Alfa Romeo Giulia Sprint GTA limited edition in 1:24th ...

The decal set enables you to build the model of a Fw 190A-8 that belonged to the JG 10, based in autumn 1944 in Parchim, North Germany (see the scheme on the box cover) or a Fw 190A-7, one of machines flown in April 1944 by Major Heinz Bär, commander of the II/JG 1 (colour side view). Spec Check Wing span: 850 mm Length: 730 mm Wing area: 12, 0 dm 2 El. motor: (Not Included) series 280, 300, 330, MPJ, Mega, AXI ACWeight: max. 440 g Controls: Elevator, ailerons, motor (Radio Not Included) The model is not suited for complete beginners, but its control with ailerons & elevator would not bring problems to any modeller experienced enough with elevator/rudder control models, e.g. slow-flyers. The flying qualities & performance of this scale model of the Fw 190A-8 are close to that of much larger model, i.e. it is more docile, & flying it provides fine & substantially more colourful experience. The model kit you have bought has several typical
Features: The semi scale model is almost finished; you only have to apply decals, install the propulsion unit & the RC equipment. You can utilise the kit’s box as the transport & storage container for the finished model. The scale model is moulded from the extruded polystyrene foam (EPSF) with a tougher surface layer, making the model less prone to surface damage. Adding to that, all exposed surfaces are reinforced with plastic covers. Thanks to the ratio of the all-up weight & of the strength of the material used the model is quite compact, this feature reducing the danger of damage in normal operation substantially, to almost negligible level. When designing this model a maximum attention was devoted to its aerodynamic layout (e.g. the semi-symmetrical wing section, the symmetrical horizontal tail section), ensuring high aerodynamic finesse, with the resulting wide band of operational speeds & docile flying characteristics typical for large models. The range of proven power units offered enables to build a scale model possessing a flight performance corresponding to that of the best slow flyers, as well as to the fully aerobatic models. To control the model you need the RC equipment suitable for controlling the slow-flyers – it would enable you to fly majority of the aerobatic figures (with the possible exception of those that require the rudder control). One of the decisive factors, affecting the flight performance & behaviour of the model, is its weight. Due to the multitude of possible combinations of the RC equipment, motors & power sources (battery packs) it is impossible to exactly state the final weight. In any case, the weight of the model without the battery pack should not exceed 320 grams. With a double-cell Li Pol 1500m Ah battery would probably weigh in at 380 grams, with the six-cell 500m Ah Ni Cd pack about 420 grams. The specified maximum weight should in no case be exceeded – the flight behaviour of heavier models deteriorates accordingly. Model: Alfa Model Focke Wulf Fw 190A-8 Scale Airplane Part No: AM0205
...

Alien Invader (Classic) Skill Lvl 2 D-ES3003 The Alien Invader is yet another great rocket from days gone by. Another great addition to our Classic Series line, this rocket is a must-have for all serious rocketeers! Estes is once again proud to reintroduce you to another Classic!A high quality plastic nose cone, laser cut balsa fins & waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic kit. ...

Brand: Align Model / Part No:T-REX 250 SE KIT (KX019004TA) Features- Newly designed main rotor head set enhanced the strength of the metal part. Utilization of high precision bearings resulting in enhanced stability & agility flying characteristics. Newly designed metal control lever & CCPM metal swashplate enhanced 3D performance.- New anti-rotation guide, with the strengthen frame base enhanced the structure strength for the main frame.- Newly designed servo screw retainers to simplify installation & maintenance.- Strengthen landing skids enhanced its durability. The added skidproof screw holes make easier assembly.- Single unit tail belt unit with the new counter weighted tail blade grips make it easier assembly & improving rudder efficiency.- Streamlined design canopy, with colorful painting to make effectively contrast in the air. Users must have a certain concept of security to operate the R/C helicopters. Be sure to read & comply with related safety notes of instruction manual before flying. Specifications:- Length:430mm-
Height:163mm- Main Blade Length:205mm- Main Rotor Diameter:460mm- Tail Rotor Diameter:108mm- Motor Ponion Gear:15T- Main Drive Gear:120T- Tail Drive Gear:28T- Drive Gear Ratio:1:8:4.28- Weight (w/o power system):148g- Flying Weight: Approx 340g- Color carton:27.3 x 10x 6.6cm- Outer carton:56x 31x 28cm, 24sets/ctn Accessories
- Included:- T-REX 250 Kit Set x 1 set- 200 Main blades x 1set- 205D Carbon main blades x 1set- RCE-BL15X 15A Brushless ESC x 1 (Build-in 5~6V adjustable BEC)- RCM-BL250SP Brushless motor (3400KV) x 1- Motor ponion gear 15T x 1- 37 Tail blade x 1set- 40 Tail blade x 1set- Clip x 1- 00 Philips screw driver x 1- 0.9mm Hex head wrench x 1- 1.3 Hexagon screw driver x 1- Dial pitch gauge pad x 1 Additional equipment required
- NOT Included:1. Transmitter (6-channel or more, helicopter system)2. Receiver (6-channel or more)3. Pitch gauge x 14. 11.1V 3S Li-Po 850m Ah battery x 15. Servo's & Gyro


...

Brand: Align Model / Part No:T-REX 250 SE Super Combo (KX019005TA)

Features:- * Newly designed main rotor head

...