General System:7 Channels PPM/PCM 1024 Aero/ Heli modes Custom 72 x 32 display LCD contrast (manual & auto) Warning LED (low power) Rotary " Jog Dial" programmeselection Digital trims with memory 10 Model memory Stick mode selection Selectable trainer facility General Functions: Aux Ch. 5 & 7 switch selection 6 Character model name Up/ Down selectable stopwatch Reverse – all 7 channels PCM failsafe – all 7 channels EPA (ATV) – all 7 channels Sub-Trim – all 7 channels Throttle Cut switch Aero Functions:* Dual Rates – Aileron, elevator & rudder* Exponential – Aileron, elevator & rudder* Switch or stick selectable 3-Circuit programmable mixing Throttle exponential Elevator ~ flap mix Aileron ~ rudder mix Air brake mix Snap roll mix Flaperon mix Elevon mix V-tail mix Flap ~ elevator mix Flap trim Heli Functions: Dual Rates – Aileron, elevatorand rudder Exponential – Aileron, elevatorand rudder 3-Circuit programmable mixing Hover Throttle -VR selectable Hover Pitch -VR selectable 5 Point throttle curve 3-circuit (Normal/ Idle 1/ Idle 2)5 point pitch curve 4-circuit (Normal/ Idle 1/ Idle 2/ Hold) Throttle Hold with rudder offset 6 Swashplate modes Gyro mixing Revolution mix Switchable 2-circuit trim offset Manufacturer: Ripmax Model / Part No: Futaba (P-FP7C) 7ch S148x 4 FM35 (N) MM R168DF ...

All the functions & features of Futaba’s current 35 M Hz Field Force 7... but now on 2.4 G Hz & with even more extras! Other than the short 2.4 G Hz aerial, it feels just like its best-selling predecessor & the characteristic large LCD, 10 model memory & easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix & govenor control. Manufacturer: Ripmax Model / Part No: Futaba (P-FP7C2-4G) 7ch S3152x 4 2.4 G Hz (N) MM R617FS ...

The new & innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, as it offers full 8 channel FASST 2.4 Ghz performance, allied to trend setting new styling & fast & ultra simple programming with its unique touch sensor input. • Big, 128 x 64 LCD with backlighting, adjustable contrast & auto-off• Touch sensor programming• 20-model memory (expandable with optional SD card)• Ten character user name• Ten character model name• Basic & Advanced menus• Enhanced aircraft, heli & glider software• Mode 1-4 selectable (Modes 3 & 4 programmable)• Assignable functions/switches• 2 proportional sliders • Digital trims on all 4 main channels• Fail-safe, servo reversing & EPA• Aircraft & heli gyro mixes Manufacturer: Ripmax Model: Futaba 8ch MM Transmitter 2.4 G Hz ...

Futaba 8ch MM Tx 2.4 G Hz FAAST (Tx-N) (P-T8FG2-4G) The new & innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, offering full 8-channel FASST 2.4 G Hz performance allied to trend-setting styling & fast, ultra-simple programming with its unique touch sensor input.
Features: Big, 128 x 64 LCD with backlighting, adjustable contrast & auto-off Touch sensor programming 20-model memory (expandable with optional SD card) 10-character user name 10-character model name Basic & Advanced menus Enhanced aircraft, heli & glider software Mode 1-4 selectable (Modes 3 & 4 programmable) Assignable functions/switches 2 proportional sliders Digital trims on all 4 main channels Fail-safe, servo reversing & EPA Aircraft & heli gyro mixes
...

Futaba 8ch Rx 2.4 G Hz FASST (FS/HS Mode) (P-R6008HS/2-4G) This 8-channel receiver from Futaba differs from all previous receivers because it can run on 2 modes. Theres Normal Mode", where the receiver works like all previous Futaba 2.4 GHz receivers, but theres also a High Speed setting, with high resolution for the demanding modeller. Normal Mode accepts any type of servos or peripherals, as the output frame rate is 14ms. High Speed Mode only accepts digital servos (including BLS series) in channels 1 to 6, & most peripheral equipment such as the gyros or brushless ESCs. The frame rate of the outputs is 7ms (twice the standard speed). The outputs for other channels allow the use of any type of servo, as the frame rate of these outputs are still 14ms on the High Speed Mode. Specification: Channels: 8 Weight: 0.5oz (13.5g) Dimensions: 1.8 x 0.9 x 0.5" (45 x 22 x 13mm) Power Requirement: 4.8 or 6.0V battery, or regulated output from ESC ...

Futaba CRS503/BB 7kg Retract Servo (P-CS503R/BB) The CS503 is a lightweight low profile servo with 180 degrees of travel designed specifically for use with mechanical retractable undercarriage & similar specialist functions. Fitted with nylon gears & a ballraced output, it also has a slower transit speed for greater realism. Specification: Weight: 28g Dimensions: 42 x 21.5 x 22mm Speed: 0.31 sec/60° (4.8v) Speed: 0.27 sec/60° (6.0v) Torque: 6.1 Kg/cm (4.8v) Torque: 7.0 Kg/cm (6.0v) ...

Futaba CRS503/BB 7kg Retract Servo (P-CS503R/BB) The CS503 is a lightweight low profile servo with 180 degrees of travel designed specifically for use with mechanical retractable undercarriage & similar specialist functions. Fitted with nylon gears & a ballraced output, it also has a slower transit speed for greater realism. Specification: Weight: 28g Dimensions: 42 x 21.5 x 22mm Speed: 0.31 sec/60° (4.8v) Speed: 0.27 sec/60° (6.0v) Torque: 6.1 Kg/cm (4.8v) Torque: 7.0 Kg/cm (6.0v) ...

CS703/MG 7.5kg Metal Geared Servo (P-CS703/MG) The CS703 has been developed to offer a mid range servo with a high

Specification

...

Futaba CS704/MG 14.6kg Metal Geared Servo (P-CS704/MG) The most powerful servo in the Cirrus range is the CS704, which provides an incredible 14.6 Kg/cm torque at 0.15sec/60 degree speed on 6.0 volts. This is the perfect servo for extreme applications such as steering on monster trucks, or primary controls on large aircraft. Specification: Weight: 56g Dimensions: 41 x 20 x 38mm Speed: 0.17 sec/60° (4.8v) Speed: 0.15 sec/60° (6.0v) Torque: 13 Kg/cm (4.8v) Torque: 7.5 Kg/cm (6.0v) ...