Never ones to rest on their laurels, Futaba have continued to develop their market leading 6 channel set, & now proudly announce the release of the new 6EXP transmitter, which offers both aircraft & helicopter functionality, together with the ability to operate all Futaba PPM & PCM 1024 receivers (35/40 M Hz systems only). New additions to the already powerful functions include a second free programmable mix & twin rate flap trim in aircraft mode, & a third swashplate mode & swash/throttle mix in heli mode. General Features Include: 6 model memory Dual rates Exponential PPM/PCM operation Failsafe (PCM only) Servo reverse End point adjustment Trainer switch Manufacturer: Ripmax Model/ Part No: Futaba 6ch S3003 x 4 FM35 Mode 2 R136F (P-FP6EXP/L) ...

For a limited time, Futaba’s FF7 is available in Credit Crunch Combo format! Supplied without servos, it’s the perfect way to upgrade from 35 M Hz to 2.4 G Hz, without breaking the bank. Perfect if you want a high performance 2.4 G Hz system, but don’t need the servos supplied in the full FF7 system. & with its easy-to-use jog dial & large LCD, you’ll be in control in minutes. Perfect! High

Specification ‘combo’ system (no servos included, so you can use with your existing Futaba-equipped models) supplied complete with lightweight R617FS 2.4 G Hz receiver, rechargeable transmitter & receiver packs, mains charger, switch & accessories. Superior ‘channel-hopping’ operating frequency changes every 2 milliseconds
- unlike other less advanced systems that operate on one or two fixed frequencies. Features
- General System:• 7 Channels• 2.4 G Hz or PPm/PCM 1024 operation• Aero/ Heli modes• Custom 72 x 32 display• LCD contrast• Warning LED (Low power)• Rotary ' Jog Dial' program selection• Digital trims with memory• 10 Mode memory• Stick mode selection• Selectable trainer facility Features
- General Functions:• Auxilary channel 5 & 7 switch selection• 6 Character model name• Up/ Down selectable stopwatch• Reverse
- all 7 channels• Failsafe• EPA End Point Adjustment (ATV)
- all 7 channels• Sub Trim
- all 7 channels• Throttle Cut Switch Aero Functions:• Dual Rates
- aileron, elevator & rudder• Exponential
- aileron, elevator & rudder• 3 Circuit programming mixing• Throttle Exponential• Elevator/ Flap mix• Aileron/ Rudder mix• Airbrake mix• Snap Roll mix• Flaperon mix• Elevon mix• V-Tail mix• Flap/ Elevator mix• Flap Trim Heli Functions:• Dual Rates
- aileron, elevator & rudder• Exponential Rates
- aileron, elevator & rudder• 3 Circuit programmable mixing• Hover throttle
- VR selectable• Hover Pitch
- VR selectable• 5 Point Throttle Curve
- 3 circuit (Normal/ Idle 1/ Idle 2/ Hold)• Throttle Hold with Rudder offset• 6 Swashplate modes• Gyro Mixing• Revolution mix• Switchable 2 circuit Trim Offset Manufacturer: Ripmax Model / Part No: Futaba 7ch Combo 2.4 G Hz (N) MM (R617FS) (P-CB7C2-4G)














...

General System:7 Channels PPM/PCM 1024 Aero/ Heli modes Custom 72 x 32 display LCD contrast (manual & auto) Warning LED (low power) Rotary " Jog Dial" programmeselection Digital trims with memory 10 Model memory Stick mode selection Selectable trainer facility General Functions: Aux Ch. 5 & 7 switch selection 6 Character model name Up/ Down selectable stopwatch Reverse – all 7 channels PCM failsafe – all 7 channels EPA (ATV) – all 7 channels Sub-Trim – all 7 channels Throttle Cut switch Aero Functions:* Dual Rates – Aileron, elevator & rudder* Exponential – Aileron, elevator & rudder* Switch or stick selectable 3-Circuit programmable mixing Throttle exponential Elevator ~ flap mix Aileron ~ rudder mix Air brake mix Snap roll mix Flaperon mix Elevon mix V-tail mix Flap ~ elevator mix Flap trim Heli Functions: Dual Rates – Aileron, elevatorand rudder Exponential – Aileron, elevatorand rudder 3-Circuit programmable mixing Hover Throttle -VR selectable Hover Pitch -VR selectable 5 Point throttle curve 3-circuit (Normal/ Idle 1/ Idle 2)5 point pitch curve 4-circuit (Normal/ Idle 1/ Idle 2/ Hold) Throttle Hold with rudder offset 6 Swashplate modes Gyro mixing Revolution mix Switchable 2-circuit trim offset Manufacturer: Ripmax Model / Part No: Futaba (P-FP7C) 7ch S148x 4 FM35 (N) MM R168DF ...

All the functions & features of Futaba’s current 35 M Hz Field Force 7... but now on 2.4 G Hz & with even more extras! Other than the short 2.4 G Hz aerial, it feels just like its best-selling predecessor & the characteristic large LCD, 10 model memory & easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix & govenor control. Manufacturer: Ripmax Model / Part No: Futaba (P-FP7C2-4G) 7ch S3152x 4 2.4 G Hz (N) MM R617FS ...

The new & innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, as it offers full 8 channel FASST 2.4 Ghz performance, allied to trend setting new styling & fast & ultra simple programming with its unique touch sensor input. • Big, 128 x 64 LCD with backlighting, adjustable contrast & auto-off• Touch sensor programming• 20-model memory (expandable with optional SD card)• Ten character user name• Ten character model name• Basic & Advanced menus• Enhanced aircraft, heli & glider software• Mode 1-4 selectable (Modes 3 & 4 programmable)• Assignable functions/switches• 2 proportional sliders • Digital trims on all 4 main channels• Fail-safe, servo reversing & EPA• Aircraft & heli gyro mixes Manufacturer: Ripmax Model: Futaba 8ch MM Transmitter 2.4 G Hz ...

Futaba 8ch Rx 2.4 G Hz FASST (FS/HS Mode) (P-R6008HS/2-4G) This 8-channel receiver from Futaba differs from all previous receivers because it can run on 2 modes. Theres Normal Mode", where the receiver works like all previous Futaba 2.4 GHz receivers, but theres also a High Speed setting, with high resolution for the demanding modeller. Normal Mode accepts any type of servos or peripherals, as the output frame rate is 14ms. High Speed Mode only accepts digital servos (including BLS series) in channels 1 to 6, & most peripheral equipment such as the gyros or brushless ESCs. The frame rate of the outputs is 7ms (twice the standard speed). The outputs for other channels allow the use of any type of servo, as the frame rate of these outputs are still 14ms on the High Speed Mode. Specification: Channels: 8 Weight: 0.5oz (13.5g) Dimensions: 1.8 x 0.9 x 0.5" (45 x 22 x 13mm) Power Requirement: 4.8 or 6.0V battery, or regulated output from ESC ...

The new & innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, as it offers full 8channel FASST 2.4 Ghz performance, allied to trend setting new styling & fast & ultra simple programming with its unique touch sensor input. Supplied complete with the new R6008HS receiver & 4 S3001 servos, the transmitter is fitted with 1700m Ah Ni-MH for extended operating time
Features:• Big, 128 x 64 LCD with backlighting, adjustable contrast & auto-off• Touch sensor programming• 20-model memory (expandable with optional SD card)• Ten character user name• Ten character model name• Basic & Advanced menus• Enhanced aircraft, heli & glider software• Mode 1-4 selectable (Modes 3 & 4 programmable)• Assignable functions/switches• 2 proportional sliders• Digital trims on all 4 main channels• Fail-safe, servo reversing & EPA• Aircraft & heli gyro mixes Manufacturer: Ripmax Model / Part No: (P-FP8FG/2-4G) 8ch S3001x 4 2.4 G Hz (N-Tx) R6008HS
...

Futaba CRS503/BB 7kg Retract Servo (P-CS503R/BB) The CS503 is a lightweight low profile servo with 180 degrees of travel designed specifically for use with mechanical retractable undercarriage & similar specialist functions. Fitted with nylon gears & a ballraced output, it also has a slower transit speed for greater realism. Specification: Weight: 28g Dimensions: 42 x 21.5 x 22mm Speed: 0.31 sec/60° (4.8v) Speed: 0.27 sec/60° (6.0v) Torque: 6.1 Kg/cm (4.8v) Torque: 7.0 Kg/cm (6.0v) ...

Futaba CRS503/BB 7kg Retract Servo (P-CS503R/BB) The CS503 is a lightweight low profile servo with 180 degrees of travel designed specifically for use with mechanical retractable undercarriage & similar specialist functions. Fitted with nylon gears & a ballraced output, it also has a slower transit speed for greater realism. Specification: Weight: 28g Dimensions: 42 x 21.5 x 22mm Speed: 0.31 sec/60° (4.8v) Speed: 0.27 sec/60° (6.0v) Torque: 6.1 Kg/cm (4.8v) Torque: 7.0 Kg/cm (6.0v) ...