With the great success of the Megatech 3PM set, the next step forward from Futaba was to make a synthesised version of the transmitter, allowing virtually instantaneous channel changes, without the need to carry a vast range of transmitter crystals. Channel numbers are changed in the transmitter programme, with the frequency information being displayed on the LCD display screen at all times. All of the other 3PM features are included in this new set, which is perfect for the ambitious club or national driver in today's ultra competitive racing climate. With 10 model memory, HRS (High Response System) & PPM modes, programmable mixing, dual rates, & a host of other features, the Megatech 3PMFS will quickly become the "must have' set for the up & coming competitor. Supplied in combo format, so you can choose the servo (s) & transmitter battery pack best suited to your application. System
Features: Digital Trims Steering Dual Rates ATL (Adjustable Throttle Limiter) Adjustable wheel tension HRS/PPM modes Steering & Throttle Exponential End Point Adjustment ABS Braking function Steering Speed function Failsafe function (HRS only) Throttle Acceleration Brake mixing Programmable mixing Sub Trims 10 Model memory Timer 3 Character model name Condition selection LED mode selection Synthesised transmitter Manufacturer: Ripmax Model / Part No: Futaba 3ch FM40 Synth (R153F) (P-CB3PMFS)
...

Futaba 3ch Rx 2.4 G Hz FHSS (P-R203GF/2-4G) Supplied as standard with the new 3PRKA radio system, the R203GF receiver utilises Futaba’s new S-FHSS transmission system for ultimate reliability & interference rejection qualities. Specification: Weight: 14g Channels: 3 Dimensions: 39 x 26 x 10mm ...

The transmitter's shape is ergonomically designed to slip into the hand & makes for easy of operation. The main stick has an offset angle for more accurate control & the throttle or flap rotary slide control, positioned next to the thumb for ease of location, follows the thumb's true line of movement. All in all a transmitter for the beginner to relax & enjoy flying with. Channels 1 & 2 can be mixed for Elevon or V-tail operation & there is servo reverse on on channels 1 & 2. Channel 3's direction is formatted to be used with most modern electric flight speed controllers. System
Features:• Single dual axis stick (aileron or rudder & elevator)• Rotary slide throttle or flap control• Function mixing for elevon / V-tail operation• Servo Reverse on channels 1 & 2• Battery level LED indicators• Micro 4 channel receiver• Ergonomic design for ease of operation Manufacturer: Ripmax Model / Part No: (P-FP3FRF) 3ch S3003x 2 FM35 (D) SS R114F
...

Specification" New Driver", " Race-Ready", " Expert" & " Big Car" menus that add functions based on driving skill level & experience Throttle Mode Select, for selecting acceleration/brake servo neutral points between 70/30 for nitro or 50/50 for electrics Redesigned keypad with large center jog button Vibrating alert system" Direct Select" single-button access to eight pre-assigned functions Navigation Lap Timer that sounds when target lap time is exceeded Servo Display Screen shows set-ups/mixes for individual servos (Expert Menu) Throttle programming options, including 5-point curve, expo & VTR Features Ergonomic design for balance, feel, weight & adjustability 40-model memory 10-character model naming 4th channel for adjusting brake bias 2048 resolution for the ultimate in precision control 2 programmable mixes Assignable buttons & dials Digital trims & dials Advanced Positioning Adapter (APA) Adjustable trigger location Backlit 128 x 64 white LCD screen with adjustable contrast Subtrims, servo reversing & EPA on all channels Throttle Variable Trace Rate (VTR) Fail-safe & battery fail-safe (voltage selectable) Direct Servo Control (DSC) Exponential & adjustable servo speed (Steering/ Throttle) Up/ Down, lap & systems timers 100-lap memory Electronic & mechanical ATL (Adjustable Throttle-Low side only) Traction control/ Acceleration rate ABS braking system Boat programming Idle-up Tx Ni MH & Futaba charger Manufacturer: Ripmax Model / Part No: Futaba 4ch Combo 2.4 G Hz (N-Tx) R604FS (P-CB4PK/2-4G) ...

The new 35 M Hz FM Skysport 4 When you're buying your first radio system, you need a simple & easy-to-use transmitter that will take you through the early stages of learning to fly. With the launch of Futaba's new Skysport 4, you can now buy a Futaba four channel system complete with three servos & the all-important trainer function. With Futaba's trainer function you simply link two transmitters together using a dedicated trainer lead & the instructor can pass control of the model to the student during the flight. More importantly, if the student gets into trouble, the instructor simply releases the trainer switch on his transmitter & takes over. There's nothing simpler or safer. And with the Skysport 4, you also get the benefit of servo reverse on all four channels & a built in charging socket as standard. Mode 2 system, supplied complete with 3 x S3003 servos & 35 M Hz R136F receiver. System Features• Built-in trainer facility• Four channel servo reverse• Supplied complete with 3 x S3003 servos• Nicad batteries for both transmitter & receiver• Supplied complete with charging socket & charger Manufacturer: Ripmax Model / Part No: Futaba 4ch S3003x 3 FM35 (N) M2 R136F (P-FP4YFN/L) ...

A 40 M Hz version of the popular entry-level Skysport 4 system. Supplied complete as a fully rechargeable system with nicads for the transmitter & receiver, plus a mains charger, the easy-to-use Skysport 4 is perfect for both cars & boats that require more than a simple 2 channel radio. Supplied complete with 3 x S3003 servos & a 40 M Hz R136F receiver, the Skysport 4 features a trainer system that allows control to be passed from instructor to student using a dedicated trainer lead. Four function servo reverse as standard makes installation simple. System Features Built-in trainer facility Four channel servo reverse Supplied complete with 3 x S3003 servos Nicad batteries for both transmitter & receiver Supplied complete with charging socket & charger Manufacturer: Ripmax Model/ Part No: Futaba 4ch S3003x 3 FM40 Mode 2 (R136F) (P-FP4YFN40/L) ...

The 6EXP is Futaba's entry-level 2.4 G Hz aircraft/helicopter system & utilises the highly advanced FASST (Futaba Advanced Spread Spectrum Technology) system to give the ultimate in performance & control. Allowing switch on & go operation, & with amazing interference rejection, this set is the standard by which all others are measured. With this set there will be no more waiting for a frequency to become clear, & fellow fliers cannot accidentally shoot you down by mistakenly switching their set on when it is on the same frequency, significantly increasing safety & allowing more flying time at popular flying sites. With the operating frequency changing every two milliseconds, the 2.4 G Hz FASST system is virtually invulnerable to interference, unlike other less advanced systems that operate on one or two fixed frequencies. Dual antenna diversity selects the best signal from the two receiver aerials, so there is a solid RF link, no matter what the attitude of the model. The tiny R617FS receiver weighs only 9.8 grams (7 grams without case), but is a full range receiver that works every bit as well in normal or giant scale models, allowing simple swaps between models. Unlike other systems there is no separate aerial module that has to be installed, increasing weight & taking up more space. Other features include Pre-Vision Packet Screening Technology that scans the incoming data, & applies sophisticated error correction techniques as well as the Easy Link system which incorporates a unique ID code in the transmitter, which when linked with the R617FS receiver, ensures that only this particular receiver will accept commands from its "paired" transmitter. Manufacturer: Futaba Model/ Part No: P-CB6EXP2-4G/R ...

Futaba 6ch Combo 2.4 G Hz FHSS (D)M2 R2006GS This brand new 6 channel system from Futaba is probably one of the most significant new radios for some time, incorporating as it does both FHSS & S-FHSS transmission modes, which allows the use of a wide & ever expanding range of receivers, including the new micro R2005GF unit. Supplied as standard as a dry battery combo together with the matching R2006GS six channel receiver, the transmitter can also be fitted with individual AA rechargeable cells or 4/5 cell battery packs. Packed with features normally only seen on much more expensive systems, these include 15 model memories, large 127 segment LCD screen, both aircraft & helicopter mixing functions, etc, etc, as well as a rotary auxiliary control, something that is lacking in most of its competitors. To improve still further the ease of programming the 6JG is provided with 3 buttons & 1 edit key, thus avoiding the endless scrolling through screens more basic systems require.• 15 Model Memory• Reverse on all functions• End Point Adjustment on all functions• Sub Trim on all functions• Dual rates• Exponential• Failsafe (all channels S-FHSS/ch 3 FHSS)• Throttle Cut• Model Type• Data Reset• Timer• Trainer function Helicopter Specific• Swash Type (Four)• Swash/ Throttle Mix• Five Point Throttle Curve (Two)• Five Point Pitch Curve (Three)• Throttle Hold• Hover Pitch• Pitch/ Rudder Mix• Gyro Mix• Swash Ring Aircraft Specific• Elevon Mix• V-Tail Mix• Flaperon Mix• Flap Setting Mix• Programmable Mix (Two)• 2nd Aileron Channel Specification Channels:6 ...