More From Contributor

£109.99
Using the same airframe as the standard E-DO F15 Eagle this model has the extra advantage of 4-cell Li-po power! With 4-cells on tap this eagle performs justice its full sized counterpart, the worlds fastest climbing jet. Just an hour will have this beautiful scale model in the air from the the time you open the box. The injection moulded EPS parts have been mostly factory assembled & all are fully painted in an aggressive US Air Force colour scheme. The fan/powerful out runner brushless motor & ESC are all pre-installed. What's more... so are the servos. The biggest job you have to do is fit the stickers, & there's a very complete set of them! Supplied without undercarriage for hand launching as standard, but an optional fixed undercarriage set is available it required. Specification Wingspan: 740mm (29.13") Length: 1100mm (43.3") Weight: 870g (24.6oz) Approx Radio System: 5x 9g Servos (Inc.) Electric Motor: 4800KV (Inc.) Li Po: 3 – 4S 2200m Ah 20C (Req.)S/C Rec: 40 – 50A (Inc.) Manufacturer: E-Do Model: F-15E Eagle EP ARTF 3-4 Cell (A-ED025) ...
Archived Product
£119.99
Just an hour will have this beautiful scale model in the air from the the time you open the box. The injection moulded EPS parts have been mostly factory assembled & all are fully painted in a stunning US Navy colour scheme. The fan/powerful outrunner brushless motor & ESC are all pre-installed. What's more... so are the servos. The biggest job you have to do is fit the stickers, & there's a very complete set of them! Supplied without undercarriage for hand launching as standard, but an optional fixed undercarriage set is available it required. Performance is very respectable for this size of model & she holds no nasty surprises for the inexperienced. With that speed, just make sure you keep her in view! Specification Wingspan: 628mm (24.7") Length: 1000mm (39.5") Servos: 3x 9g (Inc.) Electric Motor: Brushless 4300kv Li Po: 3 – 4S 2500mah 20C Manufacturer: Ripmax Part Number: E-Do F-4J Phantom EP ARTF 3-4 Cell (A-ED015) ...
Archived Product
£99.99
The SAAB J35 DRAKEN has 100% scale appearance & outstanding flight characteristics, including 1-1 thrust ratio & unlimited vertical performance!• Excellent Power Off Glide• Easy-to-Fly• ESC & 64mm EDF Unit Included• Excellent Scale Appearance Specification Wingspan: 525mm Length: 770mm Weight: 450g Servos: 9g (Inc.) Radio System: 3 Ch. (Req) Electric Motor: 4800 Kv Brushless outrunner (included) Li Po: 3S 1300m Ah 20c lipo (Req.) Manufacturer: E-Do Model: J-35 Draken (Grey) EP ARTF (A-ED030) ...
Archived Product
£9.95
Designer: G Hugh Star Rating: **A 0.375c.c. compression ignition engine by G. Hugh. A small but impressive engine which can be made on any centre lathe using bar stock. An ideal schools project which has been praised for exceptionally smooth performance. ...
Archived Product
£1149.99
There's no mistaking Matt Chapman's Embry-Riddle ride, & there's no closer match to it in looks & performance than the 1/3 scale Eagle 580 ARF! It's pounds lighter than the original, & primed to open the performance envelope to the absolute limit. It

Includes::
a complete set of hardware custom-designed for giant-scale flight. & it's scaled-out the way that only Great Planes can. Every detail is in place & accurate, from the licensed Embry-Riddle trim scheme to the tri-color trim on the pilot's helmet. Yet, even with all of the appearance & performance the Eagle 580 ARF offers, it requires even less time to assemble than the original ARF. All airframe materials meet the demands of all-out performance with the best in lightweight strength. The Eagle 580 ARFs all-up weight is just 24-28 pounds, a huge power-to-weight improvement compared to the 29-32 pound original! Fiberglass parts now include the pilot bust & landing gear as well as the cowl & wheel pants. Great Planes' engineering results in world-class weight-savings throughout the Eagle 580 ARF! The all-up weight of the Eagle 580 ARF is just 24-28 pounds
- a huge power-to-weight improvement over the original's 29-32 pound range. Great Planes produced the improvement with a combination of lightened airframe components, select woods & greater use of tough, light fiberglass. Painted fiberglass parts now include the pilot bust & landing gear as well as the cowl & wheel pants. The Eagle 580's canopy doubles as a quick-access hatch to the wing panel bolts & onboard radio equipment. Scale cockpit pluses include licensed Embry-Riddle trim & sponsor decals, a factory-installed instrument panel & a fiberglass pilot bust with a trim-matching 3-color paint job on its helmet. Hinge point hinges in the stab & wings are already installed, which improves strength & precision without extra work. A servo for each elevator half & dual servos for the rudder & ailerons provide swift, powerful response. Double-beveled control surfaces make the best use of each ounce-inch of torque, for impressive 3D maneuvers, precision aerobatics at IMAC events & everyday sport flying. Two-piece wing & stab designs offer equal measures of performance strength & transportation convenience. The wing tube is made from high-quality aircraft aluminum. The stabilizer tubes are carbon-fiber
- a stress-resistant plus that also ensures easier CG balancing. Petrol is the only way to go with a plane this size, but the Eagle 580 ARF offers two ways to enjoy st&-out performance power. The "more power" option is to go with a 100 cc twin & canister-style mufflers. The enhanced "power-to-weight" option an 85 cc single. Whichever you choose, there's room under the fiberglass cowl & easy bolt-in installation to enjoy. Specification Wingspan: 2540mm (100 in) Length: 2440 mm (96 in) Weight: 10.88-12.70kg (24-28 lb) Radio System: 6+ channel radio w/10 servos (Req) Petrol Engine: 85cc – 100 cc Wing Loading: 88-104 g/dm (29-34 oz/ft) Wing Area: 122.3 dm (1892 in) Manufacturer: Ripmax



...
Archived Product
£35.00
Author: Len Trawin A unique handbook for modellers & historians providing detailed scale plans, exploded drawings & full description of the gun carriage design of Boer Wars & World War I including limbers & ammunition wagons, sight development, wheel variations & harness details. Go on treat yourself to this great book. ...
Archived Product
£514.99
Earthrace 1300 RTR w/26cc Petrol (B-VAN060A-GPR). This beautifully finished model is supplied in Ready-To-Run format with included radio control & 26cc pullstart petrol engine – just fuel it up & you're ready to go! The fibreglass composite hull & cockpit is supplied factory finished & painted. Waterproof radio boxes protect onboard R/C. All screws & nuts are stainless steel to avoid corrosion.
Includes: CNC aluminium alloy rudders are fitted for sharp handling & added durability. Supplied with a boat st&. Specification: Length: 1400mm
Height: 340mm Weight: 15.78kg RTRIC Engine: 26cc Petrol Beam: 700mm Manufacturer: Ripmax Model: Earthrace 1300 RTR w/26cc Petrol (B-VAN060A-GPR)

...
Archived Product
£25.99
This set comes with 16 colours Colours included in this set are:VAL819 Iraqi Sand VAL820 Offwhite VAL856 Ochre Brown VAL875 Beige Brown VAL879 Green Brown VAL882 Middlestone VAL884 Stone Grey VAL886 Green Grey VAL887 Brown violet VAL911 Light Orange VAL916 Sand Yellow VAL918 Ivory VAL941 Burnt Umber VAL986 Deck Tan VAL987 Medium Grey VAL994 Dark Grey ...
Archived Product
£22.50
This catalogue edition lists & prices the stamps of Kenya, Tanzania & Uganda, including British East Africa & Zanzibar. It also

Includes::
British Somaliland & the pre-independence issues of Egypt & Sudan, & all issues for use in occupied Italian colonies during World War II. Listings for issues up to 1970 have been extracted from the 2010 Commonwealth & British Empire Stamps 1870-1970. Later issues have been revised & updated especially for this catalogue.

...
Archived Product

Eagle LO955

Designer: Martin EvansStar Rating:A 2-1/2in gauge G.N.R. (1) 4-4-0 steam locomotive by Martin Evans. [9]. (Model Mechanic, 1979-80).Sheet 1 Mainframes, main horns, main axlebox, buffer beams, frame stretchers, drag beam, hornstays, driving wheels, combined frame stretcher and pump body, bogie pin stretcher, driving crankpin, coupled crank-pin, coupling rod, bushes for coupling rods, general arrangement of bogie, bogie wheel, bogie axle, bogie frame and spring attachments, bogie main stretcher, end stretcher, cylinders, port face, section through exhaust port. Section through cylinder, steam chest cover, piston and rod, front cylinder cover rear cylinder cover, piston rod gland, valve spindle gland, crossfield, slidebar, gudgeon pin, motion bracket. Slide
valve, connecting rod, valve spindle, crosshead.Sheet 2 Feed pump, crownstay, dome brush, bushes for safety valves and manifold, pump eccentric smokebox tube-plate, bushes for backhead and blowdown, valve gear eccentric, firebox tubeplate, firebox backplate and firedoor ring, stop collar, boiler, longitudinal section of boiler, eccentric rod and strap, backhead.Sheet 3 Front buffer beam, combined frame stretcher and pump body, arrangement of steam pipes, displacement lubricator, connector (lubricator to steam tee), main horns, bogie pin stretcher, general arrangement of bogie, bogie frame and spring attachments, bogie main stretcher, main axlebox, bogie guard iron, general arrangement of cylinders, steam chest, smokebox details, smokebox door, steam chest
cover, section through exhaust port, exhaust and blast pipes, petticoat pipe, blower nozzle, port face, longitudinal section through cylinder, steam pipes (exhaust piping omitted), blast pipe cap, exhaust pipe, blast pipe, end stretcher.Sheet 4 Regulator and main steam pipe, smokebox door handles, superheater, smokebox saddle, door details, blower valve, check valve, inner dome, smokebox saddle, door details, blower valve, check valve, inner dome, smokebox front ring, turret and whistle valve, grate, dome, chimney, water gauge, safety valves, ashpan.Sheet 5 Details of pipes on drag beam, engine/tender coupling, general arrangement and plan of tender, details of firedoor, tender horns and spring, buffers, tender wheel, tender drag (front) beam, tender
frame stretchers, tender axle, tender frames, coupling hook, coupling links, tender buffer beam, tender axlebox, hornstay.Complete set of 5 sheets.
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£24.95

Product Description

Designer: Martin Evans Star Rating:A 2-1/2in gauge G.N.R. (1) 4-4-0 steam locomotive by Martin Evans. [9]. (Model Mechanic, 1979-80). Sheet 1 Mainframes, main horns, main axlebox, buffer beams, frame stretchers, drag beam, hornstays, driving wheels, combined frame stretcher & pump body, bogie pin stretcher, driving crankpin, coupled crank-pin, coupling rod, bushes for coupling rods, general arrangement of bogie, bogie wheel, bogie axle, bogie frame & spring attachments, bogie main stretcher, end stretcher, cylinders, port face, section through exhaust port. Section through cylinder, steam chest cover, piston & rod, front cylinder cover rear cylinder cover, piston rod gl&, valve spindle gl&, crossfield, slidebar, gudgeon pin, motion bracket. Slide valve, connecting rod, valve spindle, crosshead. Sheet 2 Feed pump, crownstay, dome brush, bushes for safety valves & manifold, pump eccentric smokebox tube-plate, bushes for backhead & blowdown, valve gear eccentric, firebox tubeplate, firebox backplate & firedoor ring, stop collar, boiler, longitudinal section of boiler, eccentric rod & strap, backhead. Sheet 3 Front buffer beam, combined frame stretcher & pump body, arrangement of steam pipes, displacement lubricator, connector (lubricator to steam tee), main horns, bogie pin stretcher, general arrangement of bogie, bogie frame & spring attachments, bogie main stretcher, main axlebox, bogie guard iron, general arrangement of cylinders, steam chest, smokebox details, smokebox door, steam chest cover, section through exhaust port, exhaust & blast pipes, petticoat pipe, blower nozzle, port face, longitudinal section through cylinder, steam pipes (exhaust piping omitted), blast pipe cap, exhaust pipe, blast pipe, end stretcher. Sheet 4 Regulator & main steam pipe, smokebox door handles, superheater, smokebox saddle, door details, blower valve, check valve, inner dome, smokebox saddle, door details, blower valve, check valve, inner dome, smokebox front ring, turret & whistle valve, grate, dome, chimney, water gauge, safety valves, ashpan. Sheet 5 Details of pipes on drag beam, engine/tender coupling, general arrangement & plan of tender, details of firedoor, tender horns & spring, buffers, tender wheel, tender drag (front) beam, tender frame stretchers, tender axle, tender frames, coupling hook, coupling links, tender buffer beam, tender axlebox, hornstay. Complete set of 5 sheets.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Engine - A machine designed to convert fuel into motion
water - A chemical substance. Chemical formula H2O.
iron - An electrical deviced used for removing creases from fabrics
iron - A chemical element (FE). The most common element on earth
Steam - Steam - water in gas form, water vapour. Commonly seen coming from a kettle
Locomotive - Or Loco is the powered vehicle at the front of a train
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Safety - prevents damage being caused.
Valve - An opening and closing to control the movement of fluid through pipes.
Dome - A curved shape usually seen on building structures.
Brush - A tool with a handle and bristles set into a block to preen.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Chimney - A vertical stature on the top of a building that smoke from indoor fires goes out of.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu