- Amplifies UHF TV & FM radio signals in poor reception areas
- Boosts the signal for two TVs or other receiving devices
-


...

- Boosts the satellite signal in areas of poor reception
- Distributes Sky to 2 TVs in the home without any noticeable signal

...

- Ideal for digital TV
- 5 MHz
- 1 G Hz operating range
- Zinc die cast housing bright tin finish
- Low insertion




...

Add an extra HDMI input with video resolution of HD broadcast quality 1080p & a data transfer of up to 5GB to your TVFully HD & HDCP compatible
- guarantees very best picture from all HD-ready hardware Stylish silver design with rubber feet for complete stability High precision switches Easily select between 2 different sources With the increase in HD compatible sources such as DVD-Rs & HD set top boxes such as SKY Plus one HDMI input in your HDTV is simply not enough
...

- Allows up to 2 appliances to be plugged into a standard 13A socket
- 3-pin adaptor 13 amp rating
- Shuttered sockets
-



...

- Used to replace a single LNB for a satellite installation with 2 receivers
- Watch different channels from the same satellite

...

feed two receivers from a single LNB. One of the outputs has DC pass & the receiver connected to this supplies power to the LNB. In the case of most systems this master receiver will also select polarity & thus determine the channels available to the slave receiver. Although an inexpensive method of running two receivers from a single dish it is not as flexible as a twin LNB which allows two receivers to select channels of either polarity independently. Frequency range 5 M Hz to 2 G Hz. To protect one receiver & its user if a fault should develop in the other this splitter has screw terminals for earthing. A splitter designed to ...

Run two sets of speakers from your hi-fi Switch on either set or both together Sturdy metal construction A two-way switch box for connecting a stereo power amplifier to two pairs of speakers that can be connected to the amplifiers output either separately or simultaneously. The unit is wired such that the minimum load presented to the amplifier is 4andohm when used with 8andohm speakers which is safe for most amplifiers. When both speakers are off the switch box presents a safe 220andohm load. Speaker connections are via spring-loaded terminals.

Dimensions 16.5x 9x 5cm.

...