AD 12 Solderless Breadboard(Used)

Product Description

A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI & LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘ Red’ bus is made up of two separate rows of 12 connecting sockets, & the ‘ Black’ bus is one row of 24 connecting sockets There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked & remade into a different configuration.AD-12 is two AD-01 & one AD-10 mounted on a blue base board.

Size: 183 x 168mm