A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI & LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘ Red’ bus is made up of two separate rows of 12 connecting sockets, & the ‘ Black’ bus is one row of 24 connecting sockets There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked & remade into a different configuration.AD-12 is two AD-01 & one AD-10 mounted on a blue base board.

Size: 183 x 168mm

...

A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI & LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘ Red’ bus is made up of two separate rows of 12 connecting sockets, & the ‘ Black’ bus is one row of 24 connecting sockets There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked & remade into a different configuration.AD-12 is two AD-01 & one AD-10 mounted on a blue base board.

Size: 183 x 168mm

...

A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI & LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘ Red’ bus is made up of two separate rows of 12 connecting sockets, & the ‘ Black’ bus is one row of 24 connecting sockets There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked & remade into a different configuration.AD-13 is three AD-01 & one AD-10 mounted on a blue base board.

Size: 265 x 168mm

...

A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI & LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘ Red’ bus is made up of two separate rows of 12 connecting sockets, & the ‘ Black’ bus is one row of 24 connecting sockets There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. AD-01 is 117 x 80mm ...

This breadboard will allow prototyping of projects prior to a more permanent assembly solution, it's ideal for hobbyists, students, Lab work or by any one who needs to test a circuit. A self-adhesive pad is attached to the rear of the breadboard, & consists of two sections; one section of 30 blocks of six rows labelled ‘A’ to ‘F’, & an identical section labelled ‘G’ to ‘L’ Can also be connected to AD-01 (BZ13P), AD-102 (AG10L), AD-101 (AG09K), or other AD-100 blocks. Dimensions: 42 x 83 x 10mm. ...

This breadboard will allow prototyping of projects prior to a more permanent assembly solution, it's ideal for hobbyists, students, Lab work or by any one who needs to test a circuit. A self-adhesive pad is attached to the rear of the breadboard. Can also be connected to AD-01 (BZ13P), AD-100 (AG08J), AD-102 (AG10L), or other AD-101 blocks. Dimensions: 83x 52x 10mm. ...

This breadboard will allow prototyping of projects prior to a more permanent assembly solution its ideal for hobbyists students Lab work or by any one who needs to test a circuit. A self-adhesive pad is attached to the rear of the breadboard. Can also be connected to AD-01BZ13P AD-100AG08J AD-102AG10L or other AD-101 blocks.

Dimensions 83x 52x 10mm.

...

This breadboard will allow prototyping of projects prior to a more permanent assembly solution, it's ideal for hobbyists, students, Lab work or by any one who needs to test a circuit. A self-adhesive pad is attached to the rear of the breadboard. Can also be connected to AD-01 (BZ13P), AD-100 (AG08J), AD-101 (AG09K), or other AD-102 blocks. Dimensions: 62x 83x 10mm. ...

This breadboard will allow prototyping of projects prior to a more permanent assembly solution its ideal for hobbyists students Lab work or by any one who needs to test a circuit. A self-adhesive pad is attached to the rear of the breadboard. Can also be connected to AD-01BZ13P AD-100AG08J AD-101AG09K or other AD-102 blocks.

Dimensions 62x 83x 10mm.

...

A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI & LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘ Red’ bus is made up of two separate rows of 12 connecting sockets, & the ‘ Black’ bus is one row of 24 connecting sockets There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked & remade into a different configuration.AD-11 is one AD-01 & one AD-10.

Size: 147 x 80mm

...