More From Contributor

£35.94
This galvanised round composter from Parasene is an environmentally friendly, cheap & very useful way of managing your garden waste, as it helps to break down the waste into reuseable compost. With its large capacity, convenient top loading & bottom hatch for easy removal of your home made compost, this unit would make a great addition to any garden. ...
Available
£56.34
Made from 24 gauge galvanised steel with a heavy duty U.V sheet that is 100 times stronger than a pane of glass, this cold frame will protect plants from sudden frost & climatic changes. Featuring a fully opening lid that locks into any position for ease of use & ample storage, this impressive cold frame unit would make a great addition to any garden. ...
Available
£56.98
PCL’s air powered Mini Straight Die Grinder is designed to offer the operator ultimate flexibility allowing access to small areas. Featuring a rear exhaust to keep airflow away from h&. ...
Available
£89.98
Designed for professional heavy duty use the air powered PCL Prestige 3/8” Ratchet is extremely powerful, lightweight & comes with an enclosed switch & soft handle grip making it more comfortable to use. ...
Available
£49.98
The Heavy Duty TPG60 Service Gauge has been constructed with a black vulcanite handle which is designed to withstand rigorous use. The TPG60 is suitable for use on cars & commercial vehicles thanks to the extra large filter to protect the quality mechanishm. ...
Available
£33.59
This compact multi sander is perfect for various sanding applications. It may be small in size, but it's big on power oscillating 24, 000 times per minute to give a supreme quality finish. A great little sander for the price. Comes complete with 3 sanding sheets, dust collection box & dust extraction adaptor. ...
Available
£164.00
Tough, durable & useful 100mm Pull Clamp from Power-Tec, great for various pulling applications. Featuring replaceable hardened steel jaws for long clamp life & 360 degree swivel yoke to avoid snagging. ...
Available
£26.99
A replacement 100mm pull ring, suitable for use most pull clamps used in the vehicle bodywork repair trade. ...
Available
£66.55
When car batteries & other vehicle batteries are removed, there is potential for the loss of vital electrical codes & information that ensure your vehicle run correctly. By attaching this Memory Protect system to your vehicle while the battery is removed, this data is protected, saving you time, effort & money required to reset electrical systems, or recover data after a battery change. ...
Available
£34.98
A 230mm curved sanding block, allows for detailed sanding on a wide range of curved body panels & other surfaces. ...
Available

Power Tools Price Cuts DeWalt DCD795P2 18V Li-Ion Hammer Drill/Driver,
2 X 5.0Ah XR Li-Ion Batteries & Kit Box

The DeWalt DCD795P2 18V XR Li-Ion Hammer Drill/Driver has brushless motor technology for a long tool life and excellent work efficiency. Its compact and lightweight design means you can use this drill/driver in the most confined of spaces without compromising your speed of work. There is a two speed all metal gearing system that provides an increased runtime and an extra long tool life. There are three functions on this unit - drill, driver and hammer for maximum versatility in the workspace. There is a 15 position adjustable torque control unit for consistent screw driving and drilling in whichever material the job calls for, and the intelligent trigger design allows for total control over the job at hand. There is a foot LED with a delay feature to maximise visibility as well as acting
as a flashlight. The improved grip design features rubber over mould for a comfortable grip day-in, day-out and the Li-Ion battery packs allow for easy insertion and removal. This tool features a steel belt hook and a magnetic bit holder to ensure the most important tools can be kept close at hand. This tool is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. It comes complete with a multi voltage charger for use with 18V, 14.4V and 10.8V XR Li-Ion battery packs, 2 x 5Ah Li-Ion batteries, belt hook, magnetic bit holder and a heavy duty kitbox. Max Torque (Hard) - 60NmMax Torque (Soft) - 23NmPower Output - 360WattNo Load Speed - 0-600/2000rpmBeats per Minute - 0-10200/34000bpmChuck Capacity - 1.5-13mmMax. Drilling Capacity [Wood] -
38mmMax. Drilling Capacity [Metal] - 13mmMax. Drilling Capacity [Masonry] - 13mmWeight/ L x W x H - 1.62kg/197mm x 218mm x 67mm
  • Availability: In Stock
  • Supplier: Machine Mart
  • SKU: 060217952
Availability: In Stock
£322.80

Product Description

The De Walt DCD795P2 18V XR Li-Ion Hammer Drill/ Driver has brushless motor technology for a long tool life & excellent work efficiency. Its compact & lightweight design means you can use this drill/driver in the most confined of spaces without compromising your speed of work. There is a two speed all metal gearing system that provides an increased runtime & an extra long tool life. There are three functions on this unit
- drill, driver & hammer for maximum versatility in the workspace. There is a 15 position adjustable torque control unit for consistent screw driving & drilling in whichever material the job calls for, & the intelligent trigger design allows for total control over the job at h&. There is a foot LED with a delay feature to maximise visibility as well as acting as a flashlight. The enhanced grip design features rubber over mould for a comfortable grip day-in, day-out & the Li-Ion battery packs allow for easy insertion & removal. This tool features a steel belt hook & a magnetic bit holder to ensure the most important tools can be kept close at h&. This tool is part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster. It comes complete with a multi voltage charger for use with 18V, 14.4V & 10.8V XR Li-Ion battery packs, 2 x 5 Ah Li-Ion batteries, belt hook, magnetic bit holder & a heavy duty kitbox. Max Torque (Hard)
- 60 Nm Max Torque (Soft)
- 23 Nm Power Output
- 360 Watt No Load Speed
- 0-600/2000rpm Beats per Minute
- 0-10200/34000bpm Chuck Capacity
- 1.5-13mm Max. Drilling Capacity [ Wood]
- 38mm Max. Drilling Capacity [ Metal]
- 13mm Max. Drilling Capacity [ Masonry]
- 13mm Weight/ L x W x H
- 1.62kg/197mm x 218mm x 67mm

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LED - Light Emitting Diode - a small light source
Motor - A evice that converts electricity into motion
Steel - An alloy made predominately of Iron combined with <2% carbon
Battery - A device used for the storage of electricity
Foot - A part of the body at the bottom end of the leg
Foot - or Feet - a measurement equivilent to 30cm
Minute - A measurement of time, 60 seconds is equal to one minute
Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
Batteries - Portable Power sources in cell form
rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
magnetic - A susbstance affected at a microscopic level by an applied magnetic field.
soft - A descriptive word for an item/sound which is gentle to the touch or ears
compact - Carefuly designed to ensure an item has a minimal physical size
Hammer - A tool used for providing impact to an object such as a nail
Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.
Wood - A hard material found in trees. Used for tool making, fuel and construction.
heavy - A concept of weight indicating an item may require some effort to lift or move
speed - A measurement of how fast an object travels between two points
Day - The time it takes a planet or other space objects to complete one rotation.
Compact - something that has a lot combined within a small space.
LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
Adjustable - Something that can be changed or slightly modified to fit.
Voltage - A measurement of volts.
Design - A drawing or styles that shows the look and functionality of something before its made.
Adjustable - Something that can be changed in order to fit better.
Feature - An attribute that makes something stand out.
DeWalt - A brand with a reputation for designing, engineering and building of tough industrial machinery.
Li-ion - A rechargable battery. Popular in portable electronics combining one of the best energy densities and not suffering memory effect. Very slow loss of charge when not in use.
Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

Supplier Information

Machine Mart
Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!
Page Updated: 2024-03-04 10:03:09

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu