The DCF620D2K Collated Drywall Screwdriver features a Powerful 4400rpm Brushless motor drives screws efficiently & effectively offering maximum runtime, whilst the tool free depth control & fine depth control allows for simple but highly effective setting. The De Walt DCF620D2K Drywall Screwdriver has a collated screw magazine which rotates on the tool without removal to allow it to be used in corners with the minimum of fuss. Ergonomically designed rubber grip gives you excellent user comfort whilst using the tool in either the "in-line" or "pistol-grip" hand position. Supplied with a Kit box & charger. ...

The De Walt DCF620N Drywall Screwdriver provides efficient fitting of drywall with the powerful 4400rpm BRUSHLESS motor which drives screws efficiently & effectively offering maximum runtime. LED worklight offers valuable light when working in small spaces or areas with limited light. De Waltss DCF620N Drywall Screwdriver features a " Set & forget" design which remembers your fine depth adjustment setting when removing & replacing the nose cone, whilst the Trigger lock on lets you work without having to pull the trigger. * Bare Unit only. Use with your existing batteries & charger. ...

The De Walt DCF680G2 Motion Activated Screwdriver features gyroscopic operation, coupled with a variable speed up to 430rpm allows for the greatest levels of control & user comfort. This Screwdriver has a two position handle which offers the best ergonomic solution to suit user & application. ...

The De Walt DCF813D2 Impact Wrench features a compact body which enables operation in confined spaces & repetitive use with minimal fatigue, along with the parabolic switch profile allowing for greater control over speed. Aluminium front housing provides greater heat dispersion increasing motor life & the 3 LED ‘ Halo‘ ring provides maximum illumination to work piece. ...

The De Walt DCF815D2 Impact Driver has a compact body to enable operation in confined spaces & repetitive use with minimal fatigue & the parabolic switch profile allowing for greater control over speed. This Impact Driver also features a 6.35mm ‘drop in‘ keyless hex driver allows for quick, one handed fitment & 3 LED ‘ Halo‘ ring provides maximum illumination to work piece, complete with the aluminium front housing provides greater heat dispersion increasing motor life. ...

This brushless 3 speed cordless impact driver from De Walt is ideal for applications in difficult-to-access areas. Despite its low weight, the DCF895N is still very powerful, producing up to 3300 impacts per minute at a maximum speed of 2850rpm, meaning its not only comfortable & easy to use, its capable too. Featuring all metal gearing & aluminium front housing for extended lifespan, 3 speed operation & LED worklight for illuminating the work area, the DCF895N is a joy to use in all situations. ...

The De Walt DCJ069XL Heated Jacket is especially designed to provide hours of warmth to the core of your body utilising De Walt XR batteries (not included). The jacket itself is created from a durable outer shell that is resistant to water, rain & wind. 3 core zones are heated during wearing, these include: the upper left chest, right chest & mid back, evenly spreading the heat to the most important parts of your body. There are 3 temperature settings to chose from
- low, medium or high. There is also a convenient pre-heat function so you can be warm as soon as the jacket is put on. The XR battery adapter features a battery charge indicator so you know when you are about to run dry. Also present are 2 handy USB (Universal Serial Bus) power ports for charging portable electronic devices, so you can achieve more on the go. The battery storage pouch expands to fit the De Walt 4.0 Ah & 5.0 Ah battery packs. This jacket runs on 10.8/14.4/18V batteries. * Bare Unit only. Use with your existing batteries & charger.
...

The DCK290L2 from De Walt comes complete with two powerful & durable De Walt power tools, the DCD985 XRP 3-Speed compact combi drill & the DCF885 impact driver, suitable for a wide range of drilling & driving applications. Both are powered by De Walts long-life XR Li-Ion batteries, designed for efficiency & better performance. As an added bonus, this kit is supplied with a DS150 large capacity Tough-System kitbox, 2 3.0 Ah Li-Ion batteries that last up to 33% longer than 3.0 Ah batteries & a charger, meaning this set is ready to go straight out of the box.DCD985 XRP 18V Li-Ion Combi Drill

Features: 13mm Keyless Chuck, 0-575/0-1350/0-2000rpm No Load Speed, 0-9755/0-22950/0-34000 Blows Per Min, 55 Nm max torque, 50mm drill capacity in wood, 13mm drill capacity in metal, 16mm drill capacity in masonry, 3 speed all metal gearing, 22 position adjustable torque, hammer action for concrete drilling, built in LED worklight & steel belt clip & bit magnet.DCF885 18V Li-Ion Impact Driver: 1/4" Bit Holder, M12 Max Bolt diameter, 155 Nm Max torque, 2800rpm No load speed, 3200 Impacts per min, All metal gearing, intelligent trigger control, built in LED worklight & steel belt clip & bit magnet.DS150 Tough System Kitbox

Features: Locking side handles, side clips for stacking, metal hinges & latches, bi-material comfort handle, 15 litre storage volume & 10kg Load capacity.



...

This comprehensive kit from De Walt comes complete with six durable, high performance & finest top quality power tools, batteries, charger & two heavy duty storage boxes, making it perfect for any keen DIYer or professional & excellent value. Benefiting from De Walts 18V XR battery technology, the supplied power tools will perform at a higher level for longer periods & the impressive performance figures of each of the tools will allow you to finish the job quickly, efficiently & with minimum fuss. See below for extended product specifications. DCD985XRP 18V Hammer Drill

Features: 1.5-13mm Keyless Chuck
- 3-Speed Transmission
- No Load Speed: 0-575/0-1350/0-2000rpm
- Beats Per Min: 0-9755/0-22950/0-34000bpm
- 22 Position Adjustable torque
- 80 Nm Max Torque
- Drill Capacity: 50mm (wood), 13mm (metal) & 16mm (masonry)
- With built in LED worklight DCF885 18V Impact Driver

Features: 6.35mm Keyless Hex Driver
- 2800rpm No Load Speed
- 3200 Impacts Per Minute
- 155 Nm Maximum Torque
- M12 Maximum Bolt Diameter
- Lightweight & Ergonomic
- Built In LED Worklight
- Belt Clip & Magnetic Bit Holder DCS391 18V Circular Saw

Features: 165mm 24 Tooth TCT Blade
- 55mm Max Cut
- 0-5 degree bevel cuts - Electric Brake
- Lock Off Switch DCG412 18V 18V Grinder
Features: 125mm Maximum Disc Diameter
- 0-7000rpm Stroke Rate
- Steel cut spiral bevel gearing
- M14 Spindle Thread
- Lightweight & Ergonomic
- Intelligent Trigger & Lock Off Switch DCS331 18V Jigsaw

Features: 0-3000 Strokes Per Minute
- 26mm Stroke Length
- 45 Degree bevel capacity
- Keyless Blade changes
- 135mm Depth of cut in wood, 10mm depth of cut in metal - Intelligent Trigger & Lock Off Switch DCL040 18V LED Pivot Light

Features: Bright LED light
- 90 Degree Pivoting head
- 110 lumen output
- Ergonomic design
- Can be hung or free standing
- Belt clip









































...

The DCS310N 10.8V Compact Reciprocating Saw from De Walt boasts an impressive stroke rate of 0-2700 strokes per minute & 14mm stroke length, making it ideal for a wide range of cutting applications involving woods, plastics & some metals. Ergonomically designed & very easy to use, the DCS310N features a built in LED worklight for illuminating the work area, keyless blade clamp for effortless blade changes, 3 position pivoting handle & low kerb weight, perfect for use in even the tightest areas for prolonged periods. Please Note: This is a bare unit
- No battery or charger included
...