Allows for the quick & easy installation of headset cups & press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported & sitting straight when being pressed into the frame. The handles have a cushioned grip & the fine thread makes it smooth to turn & also allows for precise adjustment when applying the force necessary to press the cups into the frame. It also features a quick release system so that it does not have to be fully unwound to be removed from the frame. ...

For the installation & removal of the lockring on both Shimano HG & SRAM cassettes, when used together with a 24mm spanner or socket & a cassette holding tool or chain whip. It can also be used on Centerlock brake discs that use a 12-spline (Ø23.4mm) lockring. ...

This freewheel remover not only a fits Shimano freewheels, allowing for their quick & easy removal so that wheel bearings & axles can be accessed, but it is also suitable for use on Campagnolo Cassette lockrings when used with a holding tool or chain whip. ...

Fixes onto the drive side of the frame, in place of the rear wheel, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur ...

Fixes into the frame in place of the rear wheel, being held in place by the bikes thru axle, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur. It can also be adjusted to fit dropout spacings from 135mm to 150mm, meaning that the rear of the frame cannot be compressed or damaged during transport ...

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted & set, without causing damage to either the forks or the crown race & bearing surface. Simply select the correct size adaptor so that it sits on the outside shoulder of the crown race, slide the setting tool onto the fork steerer, & tap the end cap firmly with a dead blow hammer until the race has been seated ...

Ideal for both road & mountain bikers, this tyre & repair kit is compact enough for road & trail side repairs & are strong enough for workshop use. The levers feature a wide & rounded profile, making them comfortable to hold, & giving them the strength needed for both tubeless & tight fitting tyres. They clip together making them easy to store & carry, & feature a spoke hook at the other end so that they hold themselves in place when more than one of them is required. It also comes with a patch kit containing 6 self-adhesive patches, sand paper (to roughen up the surface of the tube), that are supplied in a plastic box which slots into the tyre levers. ...

This impact quality 1/2"D universal joint features a special design that allows strong, smooth torque at every angle. The narrow profile combined with the 40 degrees working angle & 360 degrees rotation ensures that this swivel socket adaptor is ideal to be used on fixings that have very limited access in engine bays & confined spaces. ...

Easy to use track pump suitable for both road & mountain bikes tyres. It features a switchable valve head, so that it can fit both Presta (high pressure) & Schrader (car type) valves, with a with thumb lock to keep it in place & prevent any air escaping whilst in use. More efficient than a hand pump, & more stable than a foot pump, this is ideal to be used both at home & in the workshop. ...

For use when fitting, shortening or tidying up gear & brake cables. These cutters feature hardened triangular jaws to give a clean & precise cut, to help prevent the cable fraying, allowing the end of the cable to be threaded through the outer housing or pinch bolt. ideal to be used by both the home or shop mechanic ...