A compact kit, perfect to take out on the road, that offers a solution for having to replace a broken cable miles from home in an emergency. It contains cables with two different diameters, catering for both gear & brake applications & a selection of cable end adaptors to carry out a temporary or 'get you home' repair. ...

Owning your own workshop stand is essential for any keen home mechanic. This fully adjustable, & strong stand allows for the bike to be set at a comfortable working height. The clamp fits 20mm
- 55mm diameter tubes & seat posts, & can be rotated through 360°. It also

Includes:: a stabilising bar to hold the handlebars in place, to prevent them from turning when working on the front of the bike, & a magnetized organizer tray to keep tools & small parts to h&.


...

Oval rear view mirror providing a wide field of vision together with an easy & safe way to see the traffic behind at a glance. It pushes into the end of any straight, raised or traditional shaped handlebars & is easy to rotate & adjust. ...

Allows for the quick & easy installation of headset cups & press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported & sitting straight when being pressed into the frame. The handles have a cushioned grip & the fine thread makes it smooth to turn & also allows for precise adjustment when applying the force necessary to press the cups into the frame. It also features a quick release system so that it does not have to be fully unwound to be removed from the frame. ...

For the installation & removal of the lockring on both Shimano HG & SRAM cassettes, when used together with a 24mm spanner or socket & a cassette holding tool or chain whip. It can also be used on Centerlock brake discs that use a 12-spline (Ø23.4mm) lockring. ...

Fixes onto the drive side of the frame, in place of the rear wheel, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur ...

Fixes into the frame in place of the rear wheel, being held in place by the bikes thru axle, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur. It can also be adjusted to fit dropout spacings from 135mm to 150mm, meaning that the rear of the frame cannot be compressed or damaged during transport ...

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted & set, without causing damage to either the forks or the crown race & bearing surface. Simply select the correct size adaptor so that it sits on the outside shoulder of the crown race, slide the setting tool onto the fork steerer & tap the end cap firmly with a dead blow hammer until the race has been seated. ...

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted & set, without causing damage to either the forks or the crown race & bearing surface. Simply select the correct size adaptor so that it sits on the outside shoulder of the crown race, slide the setting tool onto the fork steerer, & tap the end cap firmly with a dead blow hammer until the race has been seated ...

Ideal for both road & mountain bikers, this tyre & repair kit is compact enough for road & trail side repairs & are strong enough for workshop use. The levers feature a wide & rounded profile, making them comfortable to hold, & giving them the strength needed for both tubeless & tight fitting tyres. They clip together making them easy to store & carry, & feature a spoke hook at the other end so that they hold themselves in place when more than one of them is required. It also comes with a patch kit containing 6 self-adhesive patches, sand paper (to roughen up the surface of the tube), that are supplied in a plastic box which slots into the tyre levers. ...