The Laser 6240 is an impact wrench designed for heavy duty applications & is manufactured from chrome vanadium CV6140 for added robustness. ...

The Laser 6249 offers professional alignment alongside checking & adjustment of the O ring. For use with Volkswagon Phaeton & Touareg from 2003, T5 from 2004, Audi A3 from 2004, this tool

Includes:: the P/D Injector alignment & injector seal fitting tools & comes complete in a robust blow mould case. Application: Volkswagon Phaeton & Touareg from 2003, T5 from 2004, Audi A3 from 2004. (4 Cylinder 4 valve per cylinder engines, 5-cylinder & 10-cylinder diesel engines)

...

The Laser 6250 is designed specifically to replace the engine sub-frame steady bushes on an extensive range of VAG models. If an ordinary puller were to be used, the two-part bush will jam in the steady bar aperture as it is withdrawn; similarly a new bush will jam against the aperture as it is inserted. This kit

Includes:: components to seal off the side of the aperture to enable easy extraction & insertion of the bushes. The tool also allows the job to be carried out without removing the subframe from the vehicle, making this a considerable time saver for the workshop as well as making it a one-person job. Completing this set is a reliable build & a blow mould case for easy storage.

...

The Laser 6252 is an all in one self contained precision driver with 3 adjustable jaw sizes, manufactured from a sturdy aluminium construction. The jaws on this device range from 18.5
- 89mm (0.73-3 1/2") & it also features a knurled drive with Hex locking key making it ideal for handles seat races, bearing & seals.
...

The Laser 6253 is an essential cylinder head rebuild kit for VAG & Porsche CR Diesel engines. This set is equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary because the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps, making the job require higher accuracy. When refitting the existing or new camshafts, they need to be assembled correctly in the retaining frame & then clamped in place while assembling to the cylinder head. The camshafts must be installed with the camshaft fitting jig, otherwise the camshaft bearings in the retaining frame will be destroyed, & the cylinder head must be replaced. The set comprises the jig, plus various camshaft support fixtures, locking devices & gear tooth alignment clamps. It is completed with a robust manufacture & carry case for long term reliability. ...

The Laser 6260 offers 3 different types of impact when used with an Air Hammer. The aluminium & nylon heads are ideal when working with aluminium components or aluminium bodywork to reduce the scarring effect normally associated with the use of an air hammer when equipped with a traditional steel hammer head. The brass head is ideally suited to use on harder metal components which can still be scared or damaged by the use of steel hammer heads such as threaded components like drive shafts & threaded pins, cotter pins & ball joint pins. One additional bonus with all of these is they are non sparking so could be used in environments where sparks are not permitted ...

The Laser 6261 chisel set unlike standard air chisels, does not turn in use, making them suitable for precise work. Manufactured from SCM440 hardness HRC48 these chisels have an overall length of 180mm & this set

Includes:: a flat, flat with indent, 3 prolonged tools for added versatility. Completing this set is a reliable build & compatibility with the Laser air hammer (part number 6031)

...

This four piece set is designed for use with the Laser air hammer (part number 6031) & has been manufactured from SCM440 to a hardness rating of HRC48. ...

Professional air hammer with variable speed trigger, built in power regulator & quick change chuck. This model can provide 2200 blows per minute (bpm)with an air hose size of 3/8" ID & a air inlet size 1/4 BSP providing an average air consumption 4.0cfm. This diesel injector extractor allows effective transmission of impact force & vibration to any adaptor with a 5/8" thread. This set

Includes:: 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12 Delphi, M16 Denso, Bosch Dual Connector & a valve seat removal tool for Denso, & off-line injector for access & a Bosch injector dismantling tool.

...

The Laser 6264 is designed to be used with an air hammer & is designed to remove most diesel injectors. This diesel injector extractor allows effective transmission of impact force & vibration to any adaptor with a 5/8" thread &

Includes:: 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12, Delphi, M16 Denso, Bosch Dual Connection. This unit also comes with a plus valve seat removal tool for denso & off-line injector adaptor for access & a Bosch injector dismantling tool.

...