TP-Link M7350 V5 4G LTE Mobile Hotspot
- 150 Mbps D/L Speed Black ...

TP-LINK M7450 4G LTE Mobile Hotspot
- 300 Mbps D/L Speed White ...

TP-LINK M7650 4G LTE Mobile Hotspot
- 600 Mbps D/L Speed White ...

TP-Link MC100CM Fast Ethernet Media Converter (SC Multi-mode) The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 850nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis Auto MDI/MDI-X for TX port Auto negotiation of duplex mode on TX port & front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers. Features. Auto negotiation of 10/100 Mbps & auto MDI/MDIX for TX port Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Link Fault Passthrough & Far End Fault minimize the loss caused by link failure timely Extend fiber distance up to 2km Easy-to-view LED indicators provide status to monitor network activity easily External power supply..

...

TP-Link MC110CS Fast Ethernet Media Converter (SC Single-mode) The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´ system chassis Auto MDI/MDI-X for TX port Auto negotiation of duplex mode on TX port & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers. Features. Auto negotiation of 10/100 Mbps & auto MDI/MDIX for TX port Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Link Fault Passthrough & Far End Fault minimize the loss caused by link failure timely Extend fiber distance up to 20km Easy-to-view LED indicators provide status to monitor network activity easily External power supply..

...

TP-Link MC112CS WDM Fast Ethernet Media Converter The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology MC112CS takes only one fiber cable to transmit & receive data which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on transferring data & at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data & at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required) Auto MDI/MDI-X for TX port Auto negotiation of duplex mode on TX port & front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers. Features. Auto negotiation of 10/100 Mbps & auto MDI/MDIX for TX port Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Link Fault Passthrough & Far End Fault minimize the loss caused by link failure timely Adopts WDM technology transmitting & receiving data on one single fiber Extend fiber distance up to 20km Easy-to-view LED indicators provide status to monitor network activity easily External power supply..

...

TP-Link MC200CM Gigabit Ethernet Media Converter The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX standards the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser

Specification at a full wire speed forwarding rate. It works at 850nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis Auto MDI/MDI-X for TX port & front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers. Features. Works at 1000 Mbps in Full-Duplex mode for both TX port & FX port Supports auto MDI/MDIX for TX port Provides switch configuration of Force / Auto transfer mode for FX port Extends fiber distance up to 0.5km Easy-to-view LED indicators provide status to monitor network activity easily External power supply..

...

TP-Link MC210CS Gigabit Single-Mode Media Converter The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-LX/LH standards the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis Auto MDI/MDI-X for TX port & front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers. Features. Works at 1000 Mbps in Full-Duplex mode for both TX port & FX port Supports auto MDI/MDIX for TX port Provides switch configuration of Force / Auto transfer mode for FX port Extends fiber distance up to 15km Easy-to-view LED indicators provide status to monitor network activity easily External power supply..

...

TP-Link MC220L Gigabit SFP Media Converter The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX/LH standards the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis Auto MDI/MDI-X for TX port & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. Features. Works at 1000 Mbps in Full-Duplex mode for both TX port & FX port Supports auto MDI/MDIX for TX port Provides switch configuration of Force / Auto transfer mode for FX port FX port support hot-swappable Extends fiber distance up to 0.55km for multi-mode fiber & 10km for single-mode fiber Easy-to-view LED indicators provide status to monitor network activity easily External power supply.. ...

What this product does TP-LINKs 300 Mbps Mini Wireless N USB (Universal Serial Bus) Adapter TL-WN823N is designed to connect your laptop or desktop to a wireless network & enjoy high speed wireless performance. The fingertip design makes the adapter convenient & easy to carry around. Whats more the TL-WN823N features Soft AP Mode one-button security setup easy-to-use configuration software making it a great choice for enjoying fast wireless network. 300 Mbps Wireless N Speed – Extend Wireless Coverage With wireless speeds of up to 300 Mbps & advanced MIMO technology the TL-WN823N provides you with a fast reliable wireless connection for lag-free online gaming & video streaming. Better still TL-WN823N achieves the best performance with wireless N devices but also works seamlessly with existing IEEE 802.11b/g networks. Features. Wireless N speed up to 300 Mbps makes the TL-WN823N ideal for HD video streaming online gaming & Vo IP calls Easy one-touch wireless security encryption with the WPS (Wi-Fi Protected Setup) button Supports Soft AP function for Wireless Internet Sharing Supports 64/128 WEP WPA/WPA2 WPA-PSK/WPA2-PSK security Supports Windows XP 32/64bit Vista 32/64bit Windows 7 32/64bit Supports ad-hoc & infrastructure mode Supports Sony PSP X-Link for lag-free online gaming for Windows XP Bundled utility provides quick and; hassle free installation Seamlessly compatible with 802.11b/g/n products. HARDWARE FEATURES Interface.  USB 2.0 Button.   Wi-Fi Protected Setup (WPS) Button  Antenna. Internal

Dimensions. (W x D x H )  1.54 x 0.72 x 0.31 in. (39 x 18.35 x 7.87 mm). WIRELESS FEATURES Wireless Standards. IEEE 802.11n IEEE 802.11g IEEE 802.11b Frequency. 2.400-2.4835 G Hz Signal Rate.. 11n Up to 300 Mbps (dynamic). 11g Up to 54 Mbps (dynamic). 11b Up to 11 Mbps (dynamic) EIRP. (;20d Bm (EIRP) Reception Sensitivity.. 300M -65d Bm@10% PER. 270M -65d Bm@10% PER. 130M -68d Bm@10% PER. 108M -68d Bm@10% PER. 54M -72d Bm@10% PER. 11M -85d Bm@8% PER. 6M -87d Bm@10% PER. 1M -93d Bm@8% PER Wireless Modes.. Soft AP Mode. Client Mode (support Ad-hoc/ Infrastructure network) Wireless Security. 64/128-bit WEP WPA-PSK / WPA2-PSK WPA / WPA2 Modulation Technology. DBPSK DQPSK CCK OFDM 16-QAM 64-QAM. OTHERS SPECIFICATIONS Certification. CE FCC IC Ro HS Package Contents.. Wireless adapter TL-WN823N. Resource CD. Quick Installation Guide System Requirements.. Windows® 7 (32/64bits). Windows® Vista (32/64bits). Windows® XP (32/64bits) Environment.. Operating Temperature 0ºC~40ºC (32ºF~104ºF). Storage Temperature -40ºC ~70ºC (-40ºF~158ºF). Operating Humidity 10%~90% non-condensing. Storage Humidity 5%~90% non-condensing..

...