Strip sizes 10 x 4mm & 15 x 4mm are 30 minute rated & strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts & braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors & 2 strips running parallel, but approx 6mm apart, plus one brush & one plain where smoke seals are required around the door to achieve FD60 status. in addition, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels & resistance


Intumescent Fire Only
- 15x 4x 2.1m Plain, White

-You can combine two different strips to achieve a 1 hour rating





...

These medium duty hinges are an ideal choice for fire doors in office environments & low frequency public areas. They are suitable for doors up to 120kg & are available in Brass as well as polished & satin stainless steel. The radius corner version is a popular choice for pre-fabricated doors.

Intumescent Hinge Pads to Suit FD30 & 60 Multipack of 24
- 100x 43mm

- IMPORTANT: If you are fitting Fire Doors you must fit Intumescent Pads under each hinge leaf to comply with CE Fire Door Mandatory Requirements. Please see Product Code 166.020
-Screws included
-Suitable for 60 minute fire doors (timber)






...

These medium duty hinges are an ideal choice for fire doors in office environments & low frequency public areas. They are suitable for doors up to 120kg & are available in Brass as well as polished & satin stainless steel. The radius corner version is a popular choice for pre-fabricated doors.

Intumescent Hinge Pads to Suit FD30 & 60 Multipack of 24
- 100x 30mm

- IMPORTANT: If you are fitting Fire Doors you must fit Intumescent Pads under each hinge leaf to comply with CE Fire Door Mandatory Requirements. Please see Product Code 166.020
-Screws included
-Suitable for 60 minute fire doors (timber)






...

Are you fitting locks to fire doors? Fire Officers are increasingly specifying intumescent lock protection to be fitted, as it is an area most likely to suffer failure in a fire situation
- In the event of a fire, the intumescent rapidly expands to provide additional protection to the lock cavity area, helping maintain the door's integrity
- Tested to BS 476 Pt 20/22 to FD60
- Simply insert along the sides of the lock case
- Can be easily trimmed Intumescent Lock Protection
- DIN LOCK Pack of 5




...

Are you fitting locks to fire doors? Fire Officers are increasingly specifying intumescent lock protection to be fitted, as it is an area most likely to suffer failure in a fire situation
- In the event of a fire, the intumescent rapidly expands to provide additional protection to the lock cavity area, helping maintain the door's integrity
- Tested to BS 476 Pt 20/22 to FD60
- Simply insert along the sides of the lock case
- Can be easily trimmed Intumescent Lock Protection
- SASHLOCK Pack of 5




...