VHT Engine Enamel™ High Heat Coating. VHT 550°F (288°C) Engine Enamels™have excellent durability & superior heat & chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today’s gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature  550°F (288°C) Intermittent Dry Time   Dries to the touch in 30 mins. Dries thoroughly overnight. Applications   Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Net Weight  11 oz. ...

VHT Engine Enamel  has excellent durability & superior heat & chemical resistance. This is specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today’s gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamel is a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough durable heat or chemical resistant finish is needed. Primer

Colour:   Light Grey Temperature:  550°F (288°C) Applications:   Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Dry Time:   Dries to the touch in 30 mins. Dries thoroughly overnight. Curing Engine Enamel VHT Engine Enamel only attains its unique properties after correct curing. – Bake at 200°F (93°C) for 20 minutes. – The inherent heat of engine operation will also accomplish curing.

...

VHT Flame Proof Coating will renew & extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems & the aerospace industry for jet engines, re-entry vehicles & other high temperature applications. VHT Flame Proof Coating will withstand temperatures up to 1093°C (2000°F) & is ideal to be used on headers, exhaust systems, or wherever an extreme temperature coating is needed. Temperature: 704°C-1093°C (1300°F-2000°F) Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads Finish: Flat Dry Time: Curing time required & can be done on or off vehicle (see below) Curing Flame Proof VHT Flame Proof High Temperature Paint only attains its unique properties after correct curing (refer to instructions on the can). On the Vehicle Off the Vehicle
- Paint must be completely dry before curing
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minutes
- Paint must be completely dry before curing
- Heat to 250°F (121°C) for 30 minutes
- Cool for 30 minutes
- Heat to 400°F (204°C) for 30 minutes
- Cool for 30 minutes
- Heat to 650°F (343°C ) for 30 minutes Caution: Do not exceed the temperature of the least heat tolerant component or the base metal Aerosol: 11 oz (312g) Paint Colours Available: Satin Clear, Cast Iron, Flat Black, Flat Silver, Flat White, Flat Red Primer

Colour: Flat White












...

VHT Engine Enamel has excellent durability & superior heat & chemical resistance. This is specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today’s gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamel is a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough durable heat or chemical resistant finish is needed. VHT Engine Enamel High Temperature Paint Colours: Gloss Clear, Ford Grey, Gloss Black, Satin Black, Chevy Orange Primer

Colour: Light Grey Temperature: 550°F (288°C) Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Curing Engine Enamel VHT Engine Enamel only attains its unique properties after correct curing.
- Bake at 200°F (93°C) for 20 minutes.
- The inherent heat of engine operation will also accomplish curing.



...

VHT Copper Gasket Cement has been formulated with the same ingredients as our world-renowned high temperature coatings. VHT Copper Gasket Cement maintains excellent adhesion under severe pressure & heat fluctuations. This high-metallic formula assures tight seals on cork, paper & metal gaskets. VHT Copper Gasket Cement has been extensively tested on racing engines in the field & on dynamometers, where it has met & exceeded the high-compression & high temperature requirements of these mega horsepower engines. Applications: Head Gaskets, Rubber Hoses, Cork Gaskets, Water Pump Gaskets, Threaded Fittings, AN Fittings, Paper Gaskets, Oil Pan Gaskets, Metal Gaskets ...

VHT 550°F (288°C) Engine Enamels™ are available in a wide range of colors, including exact match factory colors. All colors have excellent durability & superior heat & chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today's gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Curing Engine Enamel™ Engine Enamel™ only attains its unique properties after correct curing. Bake at 200°F (93°C) for 20 minutes. The inherent heat of engine operation will also accomplish curing. ...

VHT 550°F (288°C) Engine Enamels™ are available in a wide range of colors, including exact match factory colors. All colors have excellent durability & superior heat & chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today's gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Curing Engine Enamel™ Engine Enamel™ only attains its unique properties after correct curing. Bake at 200°F (93°C) for 20 minutes. The inherent heat of engine operation will also accomplish curing. ...

VHT 550°F (288°C) Engine Enamels™ are available in a wide range of colors, including exact match factory colors. All colors have excellent durability & superior heat & chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today's gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Curing Engine Enamel™ Engine Enamel™ only attains its unique properties after correct curing. Bake at 200°F (93°C) for 20 minutes. The inherent heat of engine operation will also accomplish curing. ...

VHT 550°F (288°C) Engine Enamels™ are available in a wide range of colors, including exact match factory colors. All colors have excellent durability & superior heat & chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today's gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Curing Engine Enamel™ Engine Enamel™ only attains its unique properties after correct curing. Bake at 200°F (93°C) for 20 minutes. The inherent heat of engine operation will also accomplish curing. ...

VHT 550°F (288°C) Engine Enamels™ are available in a wide range of colors, including exact match factory colors. All colors have excellent durability & superior heat & chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today's gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Curing Engine Enamel™ Engine Enamel™ only attains its unique properties after correct curing. Bake at 200°F (93°C) for 20 minutes. The inherent heat of engine operation will also accomplish curing. ...