An assortment box of aluminium rivets with washers. Range from 3.2mm (1/8”) to 4.8mm (3/16”) various lengths & flanges. 2 x Standard Flange, 3.2: x 10, 13 mm. 2 x Standard Flange, 4.0: x 12, 15 mm. 2 x Standard Flange, 4.8: x 13, 19 mm. 1 x Large Flange: 4.8 x 19 mm. 1 x Washers: M3 x 13. ...

The problem with rivets has always been that you could never hide them
- until now!. By dimpling the holes in the panel before
...

The Rockwood 1/2" Twin Hammer Impact Air Wrench features a large-capacity six-vane, ball bearing motor with a twin-hammer impact drive. Twin Hammer design Hard Hitting 450ft-lb torque Time tested design 6 Torque Settings Ring type retainer for positive socket retention Reversible direction It is fully reversible with 6 forward & reverse torque settings & an infinitely progressive throttled trigger control. Contents: (1) 1/2” Impact Gun (1) 1/4” MNPT, Male quick disconnect inlet fitting Specifications: Square Drive: 1/2” RPM: 7, 000 free speed Maximum Torque: 450 ft-lbs Air Consumption: 5 cfm @ 90 PSI Weight: 4.4 lbs. Length: 7.5 inches Inlet thread
Size: 1/4” FNPT Reversible, variable speed, 6 vane, ball bearing air motor, twin-hammer impact drive Side mounted torque limiting control knob. 0 lowest, 5 highest.
...

This entry level 10 Piece 3 HVLP Paint Gun Set provides an economical way to enter into the automotive painting world. It



...

The Rockwood 3” Cut-Off Tool is a heavy-duty professional quality tool ruggedly designed for many years of reliable service. It features a heavy-gauge wheel guard for maximum safety & a ball bearing motor for smooth operation & long life. Speed is easily controlled with an infinitely progressive throttled trigger control. Contents: 3” Cut-Off Tool Flat Wrench Hex Key Wrench, 5mm 3” x 3/8” x 1/16”, 26, 000 RPM Cut-Off Wheel 1/4” MNPT, Male quick-disconnect Inlet Fitting

Features: Arbor

Size:  3/8” Replacement Cut-Off Wheel

Size:  3/8” x 3” with a min. 20, 000 RPM rating Maximum Cutting

Depth:  11/16” RPM:  20, 000 free speed Air Consumption:  6 cfm @ 90 PSI Inlet Thread

Size:  1/4” FNPT Weight:  1.6 lbs Variable Speed, 4 Vane, Ball Bearing Air Motor









...

The Rockwood Pneumatic Mini Belt Sander is compact & powerful with an adjustable angle sanding arm for ease in grinding & sanding difficult to reach areas. Sealed Ball Bearing Drive Assembly Die Cast Housing Handle Mounted Paddle Trigger 18, 000 RPM Free Speed Features a sealed ball bearing drive assembly for smooth, low vibration operation & long life. The precision die-cast housing provides a solid foundation & offers ergonomic, one handed operation with a convenient handle mounted paddle trigger.   Conntents: (1) Mini Belt Sander (1) 4 mm Hex-Key Wrench (3) 3/8” x 13” 60 Grit Abrasive Belts (one installed) (1) 1/4” NPT Air Inlet Coupling   Product Specifications: RPM:  18, 000 free speed Air Consumption:  4 CFM @90 PSI Inlet thread

Size:  1/4” FNPT Required Belt

Size:  3/8” x 13”, minimum 18, 000 RPM  



...

Specifications RPM:  10, 000 free speed Air Consumption:  6 CFM @ 90 PSI Inlet thread

Size:  1/4” FNPT Required

...

The Rockwood 6" Dual-Action Air Sander is a heavy-duty professional quality tool. Built-in air regulator allows the user to adjust the tool speed to the job Dual-action pad motion produces swirl-free finishes Over-molded ergonomic grip increases user comfort Low Vibration Ball Bearing Design perfect for fast material removal Great for paint & rust removal, smoothing, blending, feather edging, & pre-painting prep work ...

The Rockwood Air Hammer & Chisel Set features a high-performance 4500 bpm (blows per minute) design for quick & efficient operation. 4, 500 Blows Per Minute

Includes:: 4 popular bit configurations Requires only 4CFM @ 90 PSI of air Accepts standard 0.401" Parker Taper Shanks It accepts any standard 0.401" Parker Taper shank air hammer tool bit &

Includes:: four of the most popular tool bit configurations. Contents: (1) Air Hammer (1) Retaining Spring (1) Taper Punch (1) Sheet Metal Cutter (1) Sheet Metal Trimmer (1) Flat Chisel (1) 1/4" MNPT, Male quick disconnect inlet fitting Specifications: Shank Capacity: Standard 0.401" Parker Taper BPM: 4, 500 free speed Air Consumption: 4 CFM @ 90 PSI Max. Operating Air Pressure: 90 PSI Inlet Thread
Size: 1/4" FNPT




...

Auto Darkening Welding Helmet Durable & Lightweight Impact Resistant Nylon Multi Adjustable Head Band Variable 5 to 13 shade Grind Feature   ...