FEATURES High initial cutting action Rapid stock removal Clog resistant coating BENEFITS Long lasting sanding Multipurpose usage Great value for the money SUBSTRACTS Old paint Fillers Primers Fibre Glass Gel Coat Metal Soft & Resinous Wood Wood Coatings Walls & Dry Walls NOT ADHESIVE BACKED ...

Pack of 10 Strips Use with MFS Rubber Block (D385) ...

Not to be confused with cheap imitations, this aviation snip may look similar but there is no comparison. Originally developed for the aviation industry, these quality cutting tools feature a compound leverage action for greater shearing power. The forged alloy steel blades will handle up to 1.2mm (18g) steel. Well made & comfortable, the Straight-cut aviation snip have awesome cutting ability. They ate through the thin steel & took on the thicker stuff with ease with exceptionally clean cuts all the way. Also available the Right-cut snip cut curves to the right & vice-versa for Left-cut snip. The Spring-loaded action was the most impressive on test, with the handles shooting back into the ready position after each cut.. See the How Do I Make wired edges? article in the How-To section ...

With all the features of conventional aviation snips, the Right Cut Offset Snip has the added benefit of offset handles to keep your hands above sharp edges, providing you with better visibility & manoeuverability when working to a line. Either offset pair cuts good straight lines, eliminating the need for a third pair of yellow snips. Left-cut offset snips also available. SAVE £2.05 with the Set of Offset Snips (the set included a Right-cut & a Left-cut offset snips) ...

Dimensions: 35 x 70 x 60mm. (h x w x d). Weight: 310g. Multi-use tool for small area repairs & finishing; can be worn as a ring for precise control. Heat treated under controlled conditions. Ground & polished to a high standard. ...

The problem with rivets has always been that you could never hide them
- until now!. By dimpling the holes in the panel before
...

The Rockwood 1/2" Twin Hammer Impact Air Wrench features a large-capacity six-vane, ball bearing motor with a twin-hammer impact drive. Twin Hammer design Hard Hitting 450ft-lb torque Time tested design 6 Torque Settings Ring type retainer for positive socket retention Reversible direction It is fully reversible with 6 forward & reverse torque settings & an infinitely progressive throttled trigger control. Contents: (1) 1/2” Impact Gun (1) 1/4” MNPT, Male quick disconnect inlet fitting Specifications: Square Drive: 1/2” RPM: 7, 000 free speed Maximum Torque: 450 ft-lbs Air Consumption: 5 cfm @ 90 PSI Weight: 4.4 lbs. Length: 7.5 inches Inlet thread
Size: 1/4” FNPT Reversible, variable speed, 6 vane, ball bearing air motor, twin-hammer impact drive Side mounted torque limiting control knob. 0 lowest, 5 highest.
...

This entry level 10 Piece 3 HVLP Paint Gun Set provides an economical way to enter into the automotive painting world. It



...

The Rockwood 3” Cut-Off Tool is a heavy-duty professional quality tool ruggedly designed for many years of reliable service. It features a heavy-gauge wheel guard for maximum safety & a ball bearing motor for smooth operation & long life. Speed is easily controlled with an infinitely progressive throttled trigger control. Contents: 3” Cut-Off Tool Flat Wrench Hex Key Wrench, 5mm 3” x 3/8” x 1/16”, 26, 000 RPM Cut-Off Wheel 1/4” MNPT, Male quick-disconnect Inlet Fitting

Features: Arbor

Size:  3/8” Replacement Cut-Off Wheel

Size:  3/8” x 3” with a min. 20, 000 RPM rating Maximum Cutting

Depth:  11/16” RPM:  20, 000 free speed Air Consumption:  6 cfm @ 90 PSI Inlet Thread

Size:  1/4” FNPT Weight:  1.6 lbs Variable Speed, 4 Vane, Ball Bearing Air Motor









...

The Rockwood 3/8” Inline Drill is a heavy-duty industrial level tool with hardened planetary reduction gears ruggedly designed for many years of reliable service. Product

Features: Slim & compact inline design Variable speed control High-Torque 5-vane ball bearing air motor 2, 500 RPM free speed It features a unique, slim & compact inline design to allow access to areas where other drills can’t go. A high-torque, 5-vane, ball bearing air motor provides smooth operation & long life. Speed is easily controlled with an infinitely progressive throttled trigger control.

...