Characteristics: Clear standard isophthalic brushing polyester gelcoat. Designed as a clear or pigmentable general purpose moulding gelcoat for hand layup use in GRP construction. Suitable for application by brush to give an even film, free from air & drainage. Can be used clear or pigmented, compatible with Llewellyn Ryland Polyester Colour Pastes. Shows excellent weathering properties. Application: Formulated to cure at temperatures > 16°C & needs only the addition of catalyst prior to use. Medium activity methylethyl ketone peroxide (MEKP) is the recommended catalyst at an addition level of 2% by weight to ensure sufficient cure at room temperature. GC100H may be coloured via the addition of Llewellyn Ryland Polyester Colour Paste. For best results it should be applied on to a clean polished mould in one layer of 375-500 pms (microns)/0.375-0.5mm or 460-610g per square metre. Where double gelcoating cannot be avoided the first layer must be applied to a minimum thickness of 375pm (microns)/0.375mm or 460g per square metre. Properties of Liquid Gel Coat: Appearance: Translucent pink & free from air Liquid properties: Pseudoplastic & thixotropic Gel time :100gm gelcoat, 2% MEKP @ Please note - Polyester gelcoats are best used within six months from date of purchase. * Although this product is described as Clear, it is infact translucent pink in colour,   The term ' Clear' is a grp industry standard as it is an non pigmented material, This does not create a completely translucent or water clear effect.* ...

Characteristics: White standard isophthalic brushing polyester gelcoat. Designed as a white general purpose moulding gelcoat for hand layup use in GRP construction. Suitable for application by brush to give an even film, free from air & drainage with excellent whiteness & opacity. Shows excellent weathering properties. Application: Formulated to cure at temperatures > 16°C & needs only the addition of catalyst prior to use. Medium activity methylethyl ketone peroxide (MEKP) is the recommended catalyst at an addition level of 2% by weight to ensure sufficient cure at room temperature. For best results it should be applied on to a clean polished mould in one layer of 375-500 pms (microns)/0.375-0.5mm or 460-610g per square metre. Where double gelcoating cannot be avoided the first layer must be applied to a minimum thickness of 375pm (microns)/0.375mm or 460g per square metre. Properties of Liquid Gel Coat: Appearance: Opaque white liquid & free from air Liquid properties: Pseudoplastic & thixotropic Gel time :100gm gelcoat, 2% MEKP @ 25°C ...

Lumiweld Kit can be used anywhere to make a strong fused joint, using only a butane blow lamp as a heat source. It will work on almost any type or grade of aluminium including Dural, Birmabrite (Land Rover bodywork), zinc alloys, Mazak, pot metal & die cast, resulting in a joint stronger than the parent metal. Tried & tested widely in motorcycle magazine workshops, Lumiweld has hundreds of applications for the car restorer too, such as broken carb flanges, thermostat housings, rocker covers, cracked aluminium engine blocks & cylinder heads, etc. Also Available (5 Rod) Kit ...

Lumiweld Kit can be used anywhere to make a strong fused joint, using only a butane blow lamp as a heat source. It will work on almost any type or grade of aluminium including Dural, Birmabrite (Land Rover bodywork), zinc alloys, Mazak, pot metal & die cast, resulting in a joint stronger than the parent metal. Tried & tested widely in motorcycle magazine workshops, Lumiweld has hundreds of applications for the car restorer too, such as broken carb flanges, thermostat housings, rocker covers, cracked aluminium engine blocks & cylinder heads, etc. Also Available (10 Rod) Kit ...

Our top selling LVLP (low volume low pressure) high transfer efficiency gravity feed top coat spray gun. Suitable for water & solvent based paints. Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified. Ideal for those with smaller compressors. Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032). Colour coded for easy setup identification. A well balanced & high performing gun! Technical Information ght: 649g Working pressure: 22PSI 600cc plastic pot with M16x 1-5 thread Stainless steel nozzle & needle ...

Metal Shaping with Stake Balls. When handcrafting panels, you never seem to have quite the right shape stake for the job in h&. These new ball stakes provide for difficult shapes like cycle mudguards & motorcycle petrol tanks etc. Made in three different sizes (48, 70, 100mm)
- All with a solid shank for vice mounting & anvil work. They are also drilled for hanging storage. Save £17.00 on set of all 3
...

Large Skeleton Gun for 150mm, 310mm & 400ml cartridges. Also Available in smaller size (code: S112). Sealer not Included. ...

finest top quality, Phoenix EXTRA THIN discs (178mm x 1.6mm x 22mm ) are the fastest & most efficient blades for cutting both mild steel & stainless steel, sheet or bar, rusty or new surfaces. The disc can replace the hacksaw or snips in many applications. They have been designed for use where speed, efficiency & accuracy are all important. Manufactured in Europe to European safety standards. ...

On our busy roads, having a stop for a mechanical or an electrical fault can be hazardous. It makes sense for you to be seen, particularly in poor light or at night. You should carry our fluorescent & reflective waistcoat. Fully certified to EN471, class 2. Velcro front fastening. 100% pol Hazardous Materialster with double reflective banding. Many rallies & most of Continental travel require you to carry reflective jacket including: Austria, Belgium, Bulgaria, Czech Republic, Croatia, Finl&, France, Germany, Hungary, Italy, Latvia, Lithuania, Luxembourg, Norway, Pol&, Portugal, Romania, Slovakia, Slovenia, Spain. ...

Make sure rust & particles never reach the engine. Fit an in line fuel filter. This is now, more important than ever, because of the corrosion risk of Ethanol blended fuels. A filter can be fitted easily to the fuel line in minutes, possibly saving hours at the roadside with a clogged carburettor. Becoming an essential item for mowers, outboards & quads etc as well as bikes & cars. Pack of 2, one now, one spare. Smaller Fuel Filters that can be used for Bikes & Mowers also available. ...