Hotcoat Powder Coating (1 kilo) for Hot Coat Powder Coating Gun. Powder coating means that you can coat & cure metal parts in less than an hour, & provides an extremely durable finish that is dent & chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, & contains no environmentally harmful solvents. Also available: Eastwood Hot Coat Powder Coating Colour Sample Kit Eastwood Extreme Chrome Bonded Hotcoat Powder Coating (8oz) 3 Steps: Strip & Clean your metal part before coating Coat the entire part – you can’t overcoat Cure your part in an electrical oven for about 20 minutes

Features: • Professional results • Quick colour changes • Durable finish • Easy set-up, easy to use, & easy to clean-up • Excellent fluidization of powders • Economical Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint & does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven & bake for 15 minutes. Easy set-up, easy to use, & easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply & a dedicated electric oven. Colours Available: Blue- Jet Black
- Orange
- Brown
- Yellow
- Green
- Bright Red
- Silver
- White
- Graphite Black (NOTE: Exact colours are difficult to show, due to display settings) RAL Numbers: Blue-5012, Bright Red-3001, Brown-8011, Graphite Black-9011, Green-6018, Jet Black- 9005, Orange-2009, Silver 9006, White 9016, Yellow 1021









...

Frost Wheel Silver paint has been specially formulated to restore alloy wheels on classic or modern vehicles to a like new finish. Frost Wheel Silver is perfect for covering damage & scuffs. For maximum protection prepare bare metal with primer before top coating such as Frost Grey Primer. ...

Smaller English Wheel Weight: 93kg

Size:  145 (H) x 90 (W) x 70 (L) cm Working range: 55 (H) x 70 (L) cm  

...

Smaller Planishing Hammer has the same 4600blows hammers with Product LDA02011. Product size  140 x 60 x 60cm. Working range 52 x 55cm. ...

The same adhesive used by manufacturers to bond trim fabrics, headlinings, floor carpets, & vinyls to foam, metal, wood, etc., is now available to you in convenient aerosol form. Adjustable nozzle for wide or narrow spray patterns. ...

Frost Stay Cool gives enhanced heat transfer, making a faster warm up & better cooling
- up to 15 deg. C reduction in engine operating
...

Heavy-duty steel welding table. Portable & fold-able for ease of transportation & storage. Sturdy locking pin system & adjustable foot for eliminating wobble when in use. ...

Frost Strip Gel (1 Litre) Frost Strip Gel provides a superior aircraft-grade formulation resulting in a highly effective paint remover that quickly lifts the toughest automotive coatings from metal surfaces. Its heavy-bodied consistency provides excellent vertical hold perfect for upright & difficult to reposition projects. The Frost Strip Gel formula is safe for all types of automotive metal. Fast-acting
- Results in 5 Minutes Thick Gel Formula for Vertical Surfaces Removes Multiple Layers of Automotive & Industrial Paints & Finishes Safe for all Automotive Metal saves your valuable time Please take care when opening. Pull tab under the screw top as product may splash out. When surface area is free of paint rinse surface area with warm soapy water then rinse again with clean fresh water & dry immediately.   2 Sizes Available: 1 Litre, 5 Litres 2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.  
...

Frost Strip Gel (5 Litre) Frost Strip Gel provides a superior aircraft-grade formulation resulting in a highly effective paint remover that quickly lifts the toughest automotive coatings from metal surfaces. Its heavy-bodied consistency provides excellent vertical hold perfect for upright & difficult to reposition projects. The Frost Strip Gel formula is safe for all types of automotive metal. Fast-acting
- Results in 5 Minutes Thick Gel Formula for Vertical Surfaces Removes Multiple Layers of Automotive & Industrial Paints & Finishes Safe for all Automotive Metal saves your valuable time Please take care when opening. Pull tab under the screw top as product may splash out. When surface area is free of paint rinse surface area with warm soapy water then rinse again with clean fresh water & dry immediately.   2 Sizes Available: 1 Litre, 5 Litres 2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.    
...

Frost Strip Gel (500 ml) Frost Strip Gel provides a superior aircraft-grade formulation resulting in a highly effective paint remover that quickly lifts the toughest automotive coatings from metal surfaces. Its heavy-bodied consistency provides excellent vertical hold perfect for upright & difficult to reposition projects. The Frost Strip Gel formula is safe for all types of automotive metal. Fast-acting
- Results in 5 Minutes Thick Gel Formula for Vertical Surfaces Removes Multiple Layers of Automotive & Industrial Paints & Finishes Safe for all Automotive Metal saves your valuable time Please take care when opening. Pull tab under the screw top as product may splash out. When surface area is free of paint rinse surface area with warm soapy water then rinse again with clean fresh water & dry immediately.   3 Sizes Available: 500ml, 1 Litre, 5 Litres 2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.    
...