Without a doubt one of the most versatile sheet metal working tools you could hope to find. The Shrinker / Stretcher will quickly & easily pull shape into either steel up to 1.2mm or aluminium up to 2mm. Use it to fabricate repair panels anywhere on your car but especially those awkward areas around headlights, around the edges of window frames, door edges, rain channels, wheel arch rims etc. With the Shrinker/ Stretcher you don't need to cut-&-weld in order to create curves in angled sections
- simply shrink or stretch the metal into smooth even curvatures in a fraction of the time. Produces radii as small as 76mm. Body has two 3/8 UNC threaded holes for bench mounting or bolt it to a piece of heavy angle iron for quick mounting in your vice. Set

Includes:: one body, one handle, & two jaws. Complete with instructions. Also available with two bodies & two jaws Read " How Do I Use the Shrinking / Stretching Machine? " & " 10 MUST-HAVE Restoration Tools " from Technical Article.


...

Use to fabricate or repair metal work around wheel arches, door edges, window frames, rain channels...almost any metal fabrication requiring a combination curve & angle especially those awkward areas around headlights. Use the shrinker to contract metal for inside curves: use the stretcher to expand metal for outside curves. Set

Includes:: 2 jaws, 2 bodies & 2 handles. Works up to 18 gauge mild steel, 30 gauge stainless, & 16 gauge aluminum. Comes assembled & clamps in your vice or is pre-drilled for bench mounting. Read " How Do I Use the Shrinking / Stretching Machine? " & " 10 MUST-HAVE Restoration Tools " from Technical Article.

...

Hotcoat Powder Coating (1 LB) for Hot Coat Powder Coating Gun. Powder coating means that you can coat & cure metal parts in less than an hour, & provides an extremely durable finish that is dent & chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, & contains no environmentally harmful solvents. Also available: Eastwood Hot Coat Powder Coating Colour Sample Kit Eastwood Extreme Chrome Bonded Hotcoat Powder Coating (8oz) 3 Steps: Strip & Clean your metal part before coating Coat the entire part – you can’t overcoat Cure your part in an electrical oven for about 20 minutes

Features: • Professional results • Quick colour changes • Durable finish • Easy set-up, easy to use, & easy to clean-up • Excellent fluidization of powders • Economical Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint & does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven & bake for 15 minutes. Easy set-up, easy to use, & easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply & a dedicated electric oven. Colours Available: Blue- Jet Black
- Orange
- Brown
- Yellow
- Green
- Bright Red
- Silver
- White
- Graphite Black (NOTE: Exact colours are difficult to show, due to display settings) RAL Numbers: Blue-5012, Bright Red-3001, Brown-8011, Graphite Black-9011, Green-6018, Jet Black- 9005, Orange-2009, Silver 9006, White 9016, Yellow 1021









...

Hotcoat Powder Coating (1 kilo) for Hot Coat Powder Coating Gun. Powder coating means that you can coat & cure metal parts in less than an hour, & provides an extremely durable finish that is dent & chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, & contains no environmentally harmful solvents. Also available: Eastwood Hot Coat Powder Coating Colour Sample Kit Eastwood Extreme Chrome Bonded Hotcoat Powder Coating (8oz) 3 Steps: Strip & Clean your metal part before coating Coat the entire part – you can’t overcoat Cure your part in an electrical oven for about 20 minutes

Features: • Professional results • Quick colour changes • Durable finish • Easy set-up, easy to use, & easy to clean-up • Excellent fluidization of powders • Economical Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint & does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven & bake for 15 minutes. Easy set-up, easy to use, & easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply & a dedicated electric oven. Colours Available: Blue- Jet Black
- Orange
- Brown
- Yellow
- Green
- Bright Red
- Silver
- White
- Graphite Black (NOTE: Exact colours are difficult to show, due to display settings) RAL Numbers: Blue-5012, Bright Red-3001, Brown-8011, Graphite Black-9011, Green-6018, Jet Black- 9005, Orange-2009, Silver 9006, White 9016, Yellow 1021









...

Frost Wheel Silver paint has been specially formulated to restore alloy wheels on classic or modern vehicles to a like new finish. Frost Wheel Silver is perfect for covering damage & scuffs. For maximum protection prepare bare metal with primer before top coating such as Frost Grey Primer. ...

Smaller Planishing Hammer has the same 4600blows hammers with Product LDA02011. Product size  140 x 60 x 60cm. Working range 52 x 55cm. ...

The same adhesive used by manufacturers to bond trim fabrics, headlinings, floor carpets, & vinyls to foam, metal, wood, etc., is now available to you in convenient aerosol form. Adjustable nozzle for wide or narrow spray patterns. ...

Surface Preparation De-rust, abrade & clean surfaces prior to coating. Use P240-400 grit sandpaper. Remove all abrasive dust. Spray at a distance of 25
- 30cm. The surface must be free from all contamination including rust, grease & moisture. Product Type Acryl Resin Coverage 1.25
- 1.75m² per 400ml Drying times* Dust Free: 5
- 10minutes Touch Dry: 10
- 20 minutes Sandable: after 2 hours Overcoat ready: after 2 hours * The drying time depends on temperature, humidity & the thickness of the applied coat.



...

Frost Stay Cool gives enhanced heat transfer, making a faster warm up & better cooling
- up to 15 deg. C reduction in engine operating
...

Heavy-duty steel welding table. Portable & fold-able for ease of transportation & storage. Sturdy locking pin system & adjustable foot for eliminating wobble when in use. ...