The XT M8000 Shadow+ 11 Speed Rear Derailleur features Shimano's Direct Mount compatible Rear Derailleur system which gives more space around the rear frame dropout resulting in easier rear wheel removal, but also allows frame designers to shorten chain stays, increase axle sizes & move suspension pivots. The Deore XT Shadow Dyna-Sys 11 11-speed rear derailleur delivers reliable & precise shifting with a stiff & lightweight open design & uses a super low profile design that reduces the risk of damage from trail side hazards. Shadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive & shifting. This can be switched off to remove the wheel Shadow design slant angle has been optimized for use with 40-42T sprockets. The chain tension stabilizer is also easily adjustable externally with the use of a hex key. Four fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trails & the high rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shift. Available in SGS or GS Cage in Black only. ...

The XT M8000 Single 148mm Boost Crankset Without Chainring from Shimano is a high performance crankset with a Plus 3mm outboard chainline for use with 148mm rear axle widths. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 51.8 mm chain line for use with 148mm Boost rear axle widths & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 170mm or 175mm. ...

The XT M8000 Single 148mm Boost Crankset Without Chainring from Shimano is a high performance crankset with a Plus 3mm outboard chainline for use with 148mm rear axle widths. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 51.8 mm chain line for use with 148mm Boost rear axle widths & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 170mm or 175mm. ...

The XT M8000 Single Chainring is a new 4-arm narrow-wide chainring from Shimano with hollow gear construction. It has been extremely well thought through & features the same hooked teeth as the XTR, deeper teeth with DCE (dynamic chain engagement) to increase chain retention by 150 percent & prevents the chain from jumping out. This all helps hold the chain firmly on uneven tracks while keeping chain noise & drag to a minimum & increases durability. The hollow gear construction optimises rigidity, durability & ensures minimal weight. The teeth are made more durable with the use of a plated steel construction supported by a carbon composite (CFRP) carrier body. Available in 30, 32 or 34t in Black only. ...

The XT M8000 Single Chainring is a new 4-arm narrow-wide chainring from Shimano with hollow gear construction. It has been extremely well thought through & features the same hooked teeth as the XTR, deeper teeth with DCE (dynamic chain engagement) to increase chain retention by 150 percent & prevents the chain from jumping out. This all helps hold the chain firmly on uneven tracks while keeping chain noise & drag to a minimum & increases durability. The hollow gear construction optimises rigidity, durability & ensures minimal weight. The teeth are made more durable with the use of a plated steel construction supported by a carbon composite (CFRP) carrier body. Available in 30, 32 or 34t in Black only. ...

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...

The XT M8000 Triple 40/30/22 11 Speed Chainset from Shimano means that you can ride anywhere with 11-speed rider tuned gearing. These cranks give you the power to choose how & where you ride with consistent shifting performance & enhanced chain management. This high performance chainset originates from the classic MTB group & uses the most advanced 11-Speed Dyna-Sys chainrings & an external super smooth bottom bracket for efficiency. The Cranks are Forged Hollow Tech II Aluminium to give unrivalled strength-to-weight ratio. The chainrings are hollow using a drilled steel & carbon composite construction for the middle ring, combined with a thicker aluminium can carbon composite outer ring & a plated aluminium inner ring to give excellent rigidity & durability. The chainrings have patented spike pins to ensure a smooth & fast gear change even under load & the close ratio gear combination provides enhanced cadence while reducing pedal feedback on suspension bikes. The 70 degree spider arm improves rigidity & the overall stiffness & strength has been increased with the advanced design to accommodate wider spaced bearings & an oversized axle. Available in Black only with 170mm or 175mm cranks. ...