More From Contributor

£49.99
The XT M8000 Single Chainring is a new 4-arm narrow-wide chainring from Shimano with hollow gear construction. It has been extremely well thought through & features the same hooked teeth as the XTR, deeper teeth with DCE (dynamic chain engagement) to increase chain retention by 150 percent & prevents the chain from jumping out. This all helps hold the chain firmly on uneven tracks while keeping chain noise & drag to a minimum & increases durability. The hollow gear construction optimises rigidity, durability & ensures minimal weight. The teeth are made more durable with the use of a plated steel construction supported by a carbon composite (CFRP) carrier body. Available in 30, 32 or 34t in Black only. ...
Available
£49.99
The XT M8000 Single Chainring is a new 4-arm narrow-wide chainring from Shimano with hollow gear construction. It has been extremely well thought through & features the same hooked teeth as the XTR, deeper teeth with DCE (dynamic chain engagement) to increase chain retention by 150 percent & prevents the chain from jumping out. This all helps hold the chain firmly on uneven tracks while keeping chain noise & drag to a minimum & increases durability. The hollow gear construction optimises rigidity, durability & ensures minimal weight. The teeth are made more durable with the use of a plated steel construction supported by a carbon composite (CFRP) carrier body. Available in 30, 32 or 34t in Black only. ...
Available
£89.99
The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...
Available
£80.00
The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...
Available
£80.00
The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...
Available
£159.99
The XT M8000 Triple 40/30/22 11 Speed Chainset from Shimano means that you can ride anywhere with 11-speed rider tuned gearing. These cranks give you the power to choose how & where you ride with consistent shifting performance & enhanced chain management. This high performance chainset originates from the classic MTB group & uses the most advanced 11-Speed Dyna-Sys chainrings & an external super smooth bottom bracket for efficiency. The Cranks are Forged Hollow Tech II Aluminium to give unrivalled strength-to-weight ratio. The chainrings are hollow using a drilled steel & carbon composite construction for the middle ring, combined with a thicker aluminium can carbon composite outer ring & a plated aluminium inner ring to give excellent rigidity & durability. The chainrings have patented spike pins to ensure a smooth & fast gear change even under load & the close ratio gear combination provides enhanced cadence while reducing pedal feedback on suspension bikes. The 70 degree spider arm improves rigidity & the overall stiffness & strength has been increased with the advanced design to accommodate wider spaced bearings & an oversized axle. Available in Black only with 170mm or 175mm cranks. ...
Available
£149.00
The XT M8000 Triple 40/30/22 11 Speed Chainset from Shimano means that you can ride anywhere with 11-speed rider tuned gearing. These cranks give you the power to choose how & where you ride with consistent shifting performance & enhanced chain management. This high performance chainset originates from the classic MTB group & uses the most advanced 11-Speed Dyna-Sys chainrings & an external super smooth bottom bracket for efficiency. The Cranks are Forged Hollow Tech II Aluminium to give unrivalled strength-to-weight ratio. The chainrings are hollow using a drilled steel & carbon composite construction for the middle ring, combined with a thicker aluminium can carbon composite outer ring & a plated aluminium inner ring to give excellent rigidity & durability. The chainrings have patented spike pins to ensure a smooth & fast gear change even under load & the close ratio gear combination provides enhanced cadence while reducing pedal feedback on suspension bikes. The 70 degree spider arm improves rigidity & the overall stiffness & strength has been increased with the advanced design to accommodate wider spaced bearings & an oversized axle. Available in Black only with 170mm or 175mm cranks. ...
Available
£21.00
The XT M8000 Triple 11 Speed Front Mech from Shimano is a lightweight Side Swing, Front Pull Dyna-Sys 11 11-speed triple MTB derailleur for smooth gear changes. It has been designed specifically with modern trail bikes in mind, meaning that Shimano XT side swing technology front derailleurs have an increased tyre clearance by 15mm & new cable routing resulting in the lightest shifting action yet. The light weight chain guide is now reinforced which improves response as well as adding rigidity, along with the wider pivot link which increases torsional rigidity. For easy access, the adjustment screw & clamp bolt are angled meaning maintenance can now be quicker & simpler. The angled inner chain guide tail allows for more tyre clearance & the mech is compatible with 40t outer rings. This mech has been specifically developed for 68 & 73 mm bottom bracket shells with a 50 mm chain line & comes with an option of Direct Mount, E-Type Mount, High Clamp, Low Clamp in Black/ Silver, all front mechs are Side Swinging with a Front Pull. ...
Available
£29.59
The XT M8000 Triple 11 Speed Front Mech from Shimano is a lightweight Side Swing, Front Pull Dyna-Sys 11 11-speed triple MTB derailleur for smooth gear changes. It has been designed specifically with modern trail bikes in mind, meaning that Shimano XT side swing technology front derailleurs have an increased tyre clearance by 15mm & new cable routing resulting in the lightest shifting action yet. The light weight chain guide is now reinforced which improves response as well as adding rigidity, along with the wider pivot link which increases torsional rigidity. For easy access, the adjustment screw & clamp bolt are angled meaning maintenance can now be quicker & simpler. The angled inner chain guide tail allows for more tyre clearance & the mech is compatible with 40t outer rings. This mech has been specifically developed for 68 & 73 mm bottom bracket shells with a 50 mm chain line & comes with an option of Direct Mount, E-Type Mount, High Clamp, Low Clamp in Black/ Silver, all front mechs are Side Swinging with a Front Pull. ...
Available
£29.59
The XT M8000 Triple 11 Speed Front Mech from Shimano is a lightweight Side Swing, Front Pull Dyna-Sys 11 11-speed triple MTB derailleur for smooth gear changes. It has been designed specifically with modern trail bikes in mind, meaning that Shimano XT side swing technology front derailleurs have an increased tyre clearance by 15mm & new cable routing resulting in the lightest shifting action yet. The light weight chain guide is now reinforced which improves response as well as adding rigidity, along with the wider pivot link which increases torsional rigidity. For easy access, the adjustment screw & clamp bolt are angled meaning maintenance can now be quicker & simpler. The angled inner chain guide tail allows for more tyre clearance & the mech is compatible with 40t outer rings. This mech has been specifically developed for 68 & 73 mm bottom bracket shells with a 50 mm chain line & comes with an option of Direct Mount, E-Type Mount, High Clamp, Low Clamp in Black/ Silver, all front mechs are Side Swinging with a Front Pull. ...
Available

Shimano XT M8000 Single Crankset Without Chainring Black - Aluminium -
180mm

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged HollowTech II aluminium to offer unrivalled strength-to-weight ratio and a 70 degree spider arm for optimal rigidity. This set contains cranks only and must be run with SM-CRM80 DCE chainrings and 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width and the stiffness and strength has been increased with advanced design due to use with wider spaced bearings and an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm.
  • Availability: In Stock
  • Supplier: Evans Cycles
  • SKU: EV249118-180-BLK
Availability: In Stock
£80.00

Product Description

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Aluminium - Corrosion resistant lightweight metal
Shimano - A high end bike part manufacturer
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
Width - The measurement of something from one side to the other.
Bearings - A direction or a way someone moves around.
Degree - An angle measurement, also can be the measurement of an extent that something happens, can also relate to an university academic measurement.
degree - The extremity of something or the angle. Can also relate to a university achievement.
Design - A drawing or styles that shows the look and functionality of something before its made.
Classic - Something that is still like it was originally a high quality standard.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Supplier Information

Evans Cycles
Evans Cycles is an established and well known cycle store with a 90 year history in the sector. Since the nineties, Evans Cycles has also been trading via mail order and online, and the store has undergone a recent expansion involving the creation of a large, modern distribution centre and further store openings extending throughout the UK. Evans Cycles also introduced the Ride2Work scheme offering employees savings of up to 42% and organises Ride It!, a series of road and off-road non-competitive rides that everyone is welcome to participate in. Evans Cycles stocks a wide range of bikes, including leading brands such as Norco, Cannondale, Jamis, Fuji, Raleigh and Trek alongside Evans Cycles' own brand, Pinnacle Bikes. The bikes include road bikes, mountain bikes, hybrids, BMX bikes, electric bikes, folding bikes and more. Evans Cycles also stocks clothing, accessories, components, bags, helmets and protective gear, tools and maps and books.
Page Updated: 2020-07-31 21:44:18

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu