The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...

The XT M8000 Single 142mm Crankset Without Chainring from Shimano is a high performance crankset from the classic MTB group. The cranks are Forged Hollow Tech II aluminium to offer unrivalled strength-to-weight ratio & a 70 degree spider arm for optimal rigidity. This set contains cranks only & must be run with SM-CRM80 DCE chainrings & 11-speed HG-X MTB chains. It has a 50 mm chain line for use with 135/142 mm rear axle width & the stiffness & strength has been increased with advanced design due to use with wider spaced bearings & an oversized axle. Available in Black only in 165mm, 170mm, 175mm or 180mm. ...

The XT M8000 Triple 40/30/22 11 Speed Chainset from Shimano means that you can ride anywhere with 11-speed rider tuned gearing. These cranks give you the power to choose how & where you ride with consistent shifting performance & enhanced chain management. This high performance chainset originates from the classic MTB group & uses the most advanced 11-Speed Dyna-Sys chainrings & an external super smooth bottom bracket for efficiency. The Cranks are Forged Hollow Tech II Aluminium to give unrivalled strength-to-weight ratio. The chainrings are hollow using a drilled steel & carbon composite construction for the middle ring, combined with a thicker aluminium can carbon composite outer ring & a plated aluminium inner ring to give excellent rigidity & durability. The chainrings have patented spike pins to ensure a smooth & fast gear change even under load & the close ratio gear combination provides enhanced cadence while reducing pedal feedback on suspension bikes. The 70 degree spider arm improves rigidity & the overall stiffness & strength has been increased with the advanced design to accommodate wider spaced bearings & an oversized axle. Available in Black only with 170mm or 175mm cranks. ...

The XT M8000 Triple 40/30/22 11 Speed Chainset from Shimano means that you can ride anywhere with 11-speed rider tuned gearing. These cranks give you the power to choose how & where you ride with consistent shifting performance & enhanced chain management. This high performance chainset originates from the classic MTB group & uses the most advanced 11-Speed Dyna-Sys chainrings & an external super smooth bottom bracket for efficiency. The Cranks are Forged Hollow Tech II Aluminium to give unrivalled strength-to-weight ratio. The chainrings are hollow using a drilled steel & carbon composite construction for the middle ring, combined with a thicker aluminium can carbon composite outer ring & a plated aluminium inner ring to give excellent rigidity & durability. The chainrings have patented spike pins to ensure a smooth & fast gear change even under load & the close ratio gear combination provides enhanced cadence while reducing pedal feedback on suspension bikes. The 70 degree spider arm improves rigidity & the overall stiffness & strength has been increased with the advanced design to accommodate wider spaced bearings & an oversized axle. Available in Black only with 170mm or 175mm cranks. ...

The XT M8000 Triple 11 Speed Front Mech from Shimano is a lightweight Side Swing, Front Pull Dyna-Sys 11 11-speed triple MTB derailleur for smooth gear changes. It has been designed specifically with modern trail bikes in mind, meaning that Shimano XT side swing technology front derailleurs have an increased tyre clearance by 15mm & new cable routing resulting in the lightest shifting action yet. The light weight chain guide is now reinforced which improves response as well as adding rigidity, along with the wider pivot link which increases torsional rigidity. For easy access, the adjustment screw & clamp bolt are angled meaning maintenance can now be quicker & simpler. The angled inner chain guide tail allows for more tyre clearance & the mech is compatible with 40t outer rings. This mech has been specifically developed for 68 & 73 mm bottom bracket shells with a 50 mm chain line & comes with an option of Direct Mount, E-Type Mount, High Clamp, Low Clamp in Black/ Silver, all front mechs are Side Swinging with a Front Pull. ...

The XT M8000 Triple 11 Speed Front Mech from Shimano is a lightweight Side Swing, Front Pull Dyna-Sys 11 11-speed triple MTB derailleur for smooth gear changes. It has been designed specifically with modern trail bikes in mind, meaning that Shimano XT side swing technology front derailleurs have an increased tyre clearance by 15mm & new cable routing resulting in the lightest shifting action yet. The light weight chain guide is now reinforced which improves response as well as adding rigidity, along with the wider pivot link which increases torsional rigidity. For easy access, the adjustment screw & clamp bolt are angled meaning maintenance can now be quicker & simpler. The angled inner chain guide tail allows for more tyre clearance & the mech is compatible with 40t outer rings. This mech has been specifically developed for 68 & 73 mm bottom bracket shells with a 50 mm chain line & comes with an option of Direct Mount, E-Type Mount, High Clamp, Low Clamp in Black/ Silver, all front mechs are Side Swinging with a Front Pull. ...

The XT M8000 Triple 11 Speed Front Mech from Shimano is a lightweight Side Swing, Front Pull Dyna-Sys 11 11-speed triple MTB derailleur for smooth gear changes. It has been designed specifically with modern trail bikes in mind, meaning that Shimano XT side swing technology front derailleurs have an increased tyre clearance by 15mm & new cable routing resulting in the lightest shifting action yet. The light weight chain guide is now reinforced which improves response as well as adding rigidity, along with the wider pivot link which increases torsional rigidity. For easy access, the adjustment screw & clamp bolt are angled meaning maintenance can now be quicker & simpler. The angled inner chain guide tail allows for more tyre clearance & the mech is compatible with 40t outer rings. This mech has been specifically developed for 68 & 73 mm bottom bracket shells with a 50 mm chain line & comes with an option of Direct Mount, E-Type Mount, High Clamp, Low Clamp in Black/ Silver, all front mechs are Side Swinging with a Front Pull. ...

The XT M8020 27.5'' TLR Rear Wheel from Shimano is a disc brake compatible trails wheel that brings high performance technology to a affordable price point. These wheels are lightweight, strong & durable with a 24C (27.9 mm external) UST Tubeless & tubed tyre compatible clincher rim for use with 2.0
- 2.35 inch tyres.
...

The XT M8020 29'' TLR Rear Wheel from Shimano is a disc brake compatible trails wheel that brings high performance technology to a affordable price point. These wheels are lightweight, strong & durable with a 24C (27.9 mm external) UST Tubeless & tubed tyre compatible clincher rim for use with 2.0
- 2.35 inch tyres.
...

The XT M8020 27.5'' TLR Front Wheel from Shimano is a disc brake compatible trails wheel that brings high performance technology to a affordable price point. These wheels are lightweight, strong & durable with a 24C (27.9 mm external) UST Tubeless & tubed tyre compatible clincher rim for use with 2.0
- 2.35 inch tyres. This rim is laced to the hub using 28 butted 2.0-1.8-2.0 mm stainless steel spokes. The hub features an alloy hub shell that uses angular contact bearings designed to cradle the balls giving both radial & lateral support as well as offering precision bearing adjustment & easy maintenance. The ball bearing races are ground with Cubic Boron Nitride tool for high precision & double contact seals help keep the grease in & the dirt out. The hub uses wide bearing placement gives excellent lateral rigidity further improving strength & durability & features easy to use centre-lock disc rotor mounts.
...