The Monarch TLS has been designed to deliver the perfect balance of comfort, board feel & control, making it the ideal choice for any rider looking for a mid flexing boot that’s going to deliver from first run until last. Utilising the fully heat mouldable women-specific Cloud 3 Liner & Flex Link Design the Monarch TLS means that you can create the perfect fit for every foot shape. The e VA Outsole with Rubber Impact Panels cushions the foot from vibrations ts, again giving outstanding all day fit & comfort. The Re/ Lace Liner Locker system means that you can easily make mid-day adjustments on the chair or at the top of the mountain without having to undo your TLS or Standard Laces, this is key in cold weather days. The TLS lacing system has been upgraded with Nitro´s new 45° Laceglider for the perfect lace-up overtime & increased lace durability. The Nitro Venture snowboard boot offers the true fit & comfort needed to progress all over the trail map with ease & peace of mind! Pre Moulded Custom Fit Cloud 3 Liner ILS Internal Lacing System Re-Lace Liner Locker Rubber Outsolee VA Midsole Flex Link Articulated Cuff 45° Lace Glider TLS (Twin Lacing System) Moulded TLS Lace Handles Bail Out System Solo Orthalite Footbed Fit Profile: Regular fit. The pre-moulded Cloud 3 liner can be heat moulded to improve fit & comfort. Stiffness Rating: 5/10 Nitro Venture Features Cloud 3 Liner Fully custom fit Thermacell Liner comes pre-moulded for out the box comfort. Lo-Heel frame gives a more controlled flex & helps the liner retain its shape. Latex memory pads give comfortable yet secure heel hold whilst the Flex Toe toe box ensures that the boot feels snug but not overtight.DLS (Direct Lacing System) The DLS System is directly connected to the boot liner to improve closure & foot hold. Featuring low fiction Dyneema laces for a smoother & more durable closure.TLS (Twin Lacing System)easy lace engagement & release, combined with the low abrasion of the Dyneema laces ensure that the TLS is one of the fastest & most reliable zonal lacing systems on the market. Re/ Lace Liner Locker The Re/ Lace liner locker provides easy adjustability of the inner boot when your boot shell, is already tightened. By pulling the handle you can (re)tighten the liner to ensure you have the perfect fit & tension throught out the day, all without the hassle of having to untie your boots. Bail Out System Designed to make unlacing the TLS even easier. Features a pull tab placed in the middle of the TLS lacing system on the outside of the boot, allows for effortless & super fast unlacing.e VA Outsole To reduce weight even more, Nitro use’s a full e VA Outsole on the Monarch. While keeping the weight down< e VA also provides great impact absorption & thermal insulation. Rubber Impact Panels The Outsole is reinforced with strategically placed rubber reinforcements for added resistance, traction & durability. ...

The Monarch TLS has been designed to deliver the perfect balance of comfort, board feel & control, making it the ideal choice for any rider looking for a mid flexing boot that’s going to deliver from first run until last. Utilising the fully heat mouldable women-specific Cloud 3 Liner & Flex Link Design the Monarch TLS means that you can create the perfect fit for every foot shape. The e VA Outsole with Rubber Impact Panels cushions the foot from vibrations ts, again giving outstanding all day fit & comfort. The Re/ Lace Liner Locker system means that you can easily make mid-day adjustments on the chair or at the top of the mountain without having to undo your TLS or Standard Laces, this is key in cold weather days. The TLS lacing system has been upgraded with Nitro´s new 45° Laceglider for the perfect lace-up overtime & increased lace durability. The Nitro Venture snowboard boot offers the true fit & comfort needed to progress all over the trail map with ease & peace of mind! Pre Moulded Custom Fit Cloud 3 Liner ILS Internal Lacing System Re-Lace Liner Locker Rubber Outsolee VA Midsole Flex Link Articulated Cuff 45° Lace Glider TLS (Twin Lacing System) Moulded TLS Lace Handles Bail Out System Solo Orthalite Footbed Fit Profile: Regular fit. The pre-moulded Cloud 3 liner can be heat moulded to improve fit & comfort. Stiffness Rating: 5/10 Nitro Venture Features Cloud 3 Liner Fully custom fit Thermacell Liner comes pre-moulded for out the box comfort. Lo-Heel frame gives a more controlled flex & helps the liner retain its shape. Latex memory pads give comfortable yet secure heel hold whilst the Flex Toe toe box ensures that the boot feels snug but not overtight.DLS (Direct Lacing System) The DLS System is directly connected to the boot liner to improve closure & foot hold. Featuring low fiction Dyneema laces for a smoother & more durable closure.TLS (Twin Lacing System)easy lace engagement & release, combined with the low abrasion of the Dyneema laces ensure that the TLS is one of the fastest & most reliable zonal lacing systems on the market. Re/ Lace Liner Locker The Re/ Lace liner locker provides easy adjustability of the inner boot when your boot shell, is already tightened. By pulling the handle you can (re)tighten the liner to ensure you have the perfect fit & tension throught out the day, all without the hassle of having to untie your boots. Bail Out System Designed to make unlacing the TLS even easier. Features a pull tab placed in the middle of the TLS lacing system on the outside of the boot, allows for effortless & super fast unlacing.e VA Outsole To reduce weight even more, Nitro use’s a full e VA Outsole on the Monarch. While keeping the weight down< e VA also provides great impact absorption & thermal insulation. Rubber Impact Panels The Outsole is reinforced with strategically placed rubber reinforcements for added resistance, traction & durability. ...

The Monarch TLS has been designed to deliver the perfect balance of comfort, board feel & control, making it the ideal choice for any rider looking for a mid flexing boot that’s going to deliver from first run until last. Utilising the fully heat mouldable women-specific Cloud 3 Liner & Flex Link Design the Monarch TLS means that you can create the perfect fit for every foot shape. The e VA Outsole with Rubber Impact Panels cushions the foot from vibrations ts, again giving outstanding all day fit & comfort. The Re/ Lace Liner Locker system means that you can easily make mid-day adjustments on the chair or at the top of the mountain without having to undo your TLS or Standard Laces, this is key in cold weather days. The TLS lacing system has been upgraded with Nitro´s new 45° Laceglider for the perfect lace-up overtime & increased lace durability. The Nitro Venture snowboard boot offers the true fit & comfort needed to progress all over the trail map with ease & peace of mind! Pre Moulded Custom Fit Cloud 3 Liner ILS Internal Lacing System Re-Lace Liner Locker Rubber Outsolee VA Midsole Flex Link Articulated Cuff 45° Lace Glider TLS (Twin Lacing System) Moulded TLS Lace Handles Bail Out System Solo Orthalite Footbed Fit Profile: Regular fit. The pre-moulded Cloud 3 liner can be heat moulded to improve fit & comfort. Stiffness Rating: 5/10 Nitro Venture Features Cloud 3 Liner Fully custom fit Thermacell Liner comes pre-moulded for out the box comfort. Lo-Heel frame gives a more controlled flex & helps the liner retain its shape. Latex memory pads give comfortable yet secure heel hold whilst the Flex Toe toe box ensures that the boot feels snug but not overtight.DLS (Direct Lacing System) The DLS System is directly connected to the boot liner to improve closure & foot hold. Featuring low fiction Dyneema laces for a smoother & more durable closure.TLS (Twin Lacing System)easy lace engagement & release, combined with the low abrasion of the Dyneema laces ensure that the TLS is one of the fastest & most reliable zonal lacing systems on the market. Re/ Lace Liner Locker The Re/ Lace liner locker provides easy adjustability of the inner boot when your boot shell, is already tightened. By pulling the handle you can (re)tighten the liner to ensure you have the perfect fit & tension throught out the day, all without the hassle of having to untie your boots. Bail Out System Designed to make unlacing the TLS even easier. Features a pull tab placed in the middle of the TLS lacing system on the outside of the boot, allows for effortless & super fast unlacing.e VA Outsole To reduce weight even more, Nitro use’s a full e VA Outsole on the Monarch. While keeping the weight down< e VA also provides great impact absorption & thermal insulation. Rubber Impact Panels The Outsole is reinforced with strategically placed rubber reinforcements for added resistance, traction & durability. ...

The Monarch TLS has been designed to deliver the perfect balance of comfort, board feel & control, making it the ideal choice for any rider looking for a mid flexing boot that’s going to deliver from first run until last. Utilising the fully heat mouldable women-specific Cloud 3 Liner & Flex Link Design the Monarch TLS means that you can create the perfect fit for every foot shape. The e VA Outsole with Rubber Impact Panels cushions the foot from vibrations ts, again giving outstanding all day fit & comfort. The Re/ Lace Liner Locker system means that you can easily make mid-day adjustments on the chair or at the top of the mountain without having to undo your TLS or Standard Laces, this is key in cold weather days. The TLS lacing system has been upgraded with Nitro´s new 45° Laceglider for the perfect lace-up overtime & increased lace durability. The Nitro Venture snowboard boot offers the true fit & comfort needed to progress all over the trail map with ease & peace of mind! Pre Moulded Custom Fit Cloud 3 Liner ILS Internal Lacing System Re-Lace Liner Locker Rubber Outsolee VA Midsole Flex Link Articulated Cuff 45° Lace Glider TLS (Twin Lacing System) Moulded TLS Lace Handles Bail Out System Solo Orthalite Footbed Fit Profile: Regular fit. The pre-moulded Cloud 3 liner can be heat moulded to improve fit & comfort. Stiffness Rating: 5/10 Nitro Venture Features Cloud 3 Liner Fully custom fit Thermacell Liner comes pre-moulded for out the box comfort. Lo-Heel frame gives a more controlled flex & helps the liner retain its shape. Latex memory pads give comfortable yet secure heel hold whilst the Flex Toe toe box ensures that the boot feels snug but not overtight.DLS (Direct Lacing System) The DLS System is directly connected to the boot liner to improve closure & foot hold. Featuring low fiction Dyneema laces for a smoother & more durable closure.TLS (Twin Lacing System)easy lace engagement & release, combined with the low abrasion of the Dyneema laces ensure that the TLS is one of the fastest & most reliable zonal lacing systems on the market. Re/ Lace Liner Locker The Re/ Lace liner locker provides easy adjustability of the inner boot when your boot shell, is already tightened. By pulling the handle you can (re)tighten the liner to ensure you have the perfect fit & tension throught out the day, all without the hassle of having to untie your boots. Bail Out System Designed to make unlacing the TLS even easier. Features a pull tab placed in the middle of the TLS lacing system on the outside of the boot, allows for effortless & super fast unlacing.e VA Outsole To reduce weight even more, Nitro use’s a full e VA Outsole on the Monarch. While keeping the weight down< e VA also provides great impact absorption & thermal insulation. Rubber Impact Panels The Outsole is reinforced with strategically placed rubber reinforcements for added resistance, traction & durability. ...

If you’re one of those riders who are looking for a performance-oriented freeride board, but you want a board that’s not going to make you work hard to get that performance, then the Nitro Mountain could be your perfect choice. Built around a fully directional tapered shape & featuring a traditional camber with early rise in both the nose & tail, the Mountain delivers the perfect balance of on-piste control & response with effortless lift & float in the pow. So, no matter if you’re charging around the piste or exploring the backcountry, you know that it’s going to be able to tackle absolutely everything you can throw at it. However, what separates the Mountain from most boards in this category is that Nitro has rewound the stiffness back a notch. Coming in at a 7/10, you’d still class it as a performance board, but by just nipping back that aggression a tad, it’s a performance board that’s a joy to ride 100% of the time, not just on those days where you want to gun it. So, what does that mean in real terms? It means that if you’re after a board that’s going to charge on the days where you want to push yourself to the max but on those days where you want to take a cruise with the family, it’s going to feel relaxed & a bit more rider-friendly, in short, it’s best to describe it as a freeride board that you’re just going to want to ride all day & every day. Rider Profile: All-Terrain freeriders Riders looking for a performance freeride board that delivers stunning performance over the whole mountain that is still friendly enough to use as your everyday board. Shape Overview: Tapered Directional The Mountain utilises a fully directional tapered freeride shape. This innovative snowboard profile is designed to be ridden with a slightly longer nose than tail. This shape gives you plenty of float whilst powering up the back of the board, giving you a more dynamic feel on edge. The 8mm tapered shape means that the nose is wider than the tail, promoting smooth turn entry & exit, stability at speed, & enhanced deep snow flotation. However, the blunt-tipped early rise nose design also lowers the swing weight at the extremities of the board, giving the Mountain a more balanced feel for a more predictable & stable carve. The slight cutback in the tail allows the back of the board to sink a bit more easily, making for effortless powder performance. Profile: Cam Out Camber Cam-Out Camber is a traditional camber with early & smooth transitions into tip andtail. Those early rise tips allow snow to flow under the nose, reduce drag, & ensure the board comes onto the plane quickly & easily. The regular camber allows the rider to power up the sidecut across its entire length, creating a stable & reassuring ride on edge. Progressive Sidecut A larger radius in the front blended into a tighter one towards the tail: The progressive sidecut makes accelerating out of turns a breeze while maintaining a catch-free nose area. Construction Heading up the Mountain’s high-quality construction is the Powercore II. This is a tip-to-tail poplar wood core with additional beech wood stringers. This combination delivers the perfect balance ofstrength, smooth response & insane snap. Now to give the Mountain its more rider-friendly feel, the layers are formed from a torsionally softer bi-ax glass. This works in harmony with the lively core to give the Mountain its combination of great performance but with a more relaxed easier going feel. Base Sintered Speed Formula HD Base. Utilising a new base material compound, Nitro has achieved higher abrasion resistance, increased wax absorption, & higher snow speeds. ...

If you've ever thought about getting into split boarding, but the high price of equipment has put you off, then the Nitro Nomad might make you change your mind. As one of the lowest-priced split boards on the market, the Nomad brings the cost of split board ownership right down. However, it's not just the low price of the Nomad that is a surprise; it's also the fact that Nitro has managed to create a board with such an impressive spec at such a low price. Built around a directional mid wide shape, the Nomad delivers the perfect balance of stability & float, ensuring that no matter if you're out hunting powder or exploring in firmer conditions, the board is going to take it all in its stride. Utilising Nitro's Flat Out camber, which features a flat section between the feet with early-rise at the tips with Power Pods edge profiling, the Nomad gives a positive & secure ride, giving you the confidence to push when riding. The Forged T7075 clips with quick-release tip & tail locks work harmoniously with the pre-drilled Kuhla skins fitting system to ensure that the Nomad is super quick to switch between skinning & riding mode. Available as board only or as a great value package that contains board, Kuhla skins, Spark Bindings & Nitro Foldable Poles. Rider Style Riders who want to get out & explore off the beaten track. Shape Overview The Nomad's directional shape delivers a versatile ride across the whole mountain. Built around a mid-wide platform, it combines effortless lift & float in deep snow with a stable & confidence-inspiring ride in firmer conditions. That extra width ensures toe & heel drag isn't an issue whilst also giving a wider, more stable ski for skinning. To help the Nomad engage the edge more efficiently, it utilises Nitro's Power Pod technology. Placing a tighter radius in the centre of the sidecut with a larger radius towards the tip & tail, the Power Pods deliver two major benefits. Firstly, it improves the efficiency of the sidecut improving edge hold & grip; secondly, it creates wider zones under the binding areas reducing toe drag, allowing you to ride with more relaxing shallower angles. Profile: Flat Out Flat-Out Rocker is a hybrid flat camber profile where the nose & tail lift off before the traditional contact points, providing effortless turns & catch-free manoeuvres. The liftednose & tail provide excellent float, pressability, & forgiveness in any terrain. The ultimate hybrid between Zero Camber & Reverse Camber means that you can have the most playful yetstable ride for easy progression & all-mountain domination. Construction Heading up the Nomad's quality construction is the Powercore. This uses tip-to-tail poplar wood, providing lightweight strength & the perfect blend of flex, response & feel. The structural layers are formed from Bi-Lite glass. This torsionally softer glass creates a playful yet responsive ride, making the Nomad effortless to ride & more forgiving, ensuring those all-day long expeditions don't punish you too hard. Baseextruded FH Base. This durable, low maintenance base is perfect for split boards as it takes loads of abuse & is easy to repair. So when you catch those shark fins out in the backcountry, you don't have to worry too much about expensive repair jobs. Forged T7075 Aluminium Hooks Tip & Tail Locks Pre-Drilled for Kohla Skins ...

The Optisym is a new addition to the Nitro collection for winter 21/22 & is aimed at riders looking for a high-performance board that can not only destroy the whole mountain but also turn it into one giant fun park. Built around an advanced blunt twin chassis utilising a deeper heelside sidecut, the Optisym delivers that perfect combination of on-slope performance with freestyle balance & control, ensuring that no matter what or where you ride, this is one board that's going to feel entirely at home. Now there's no point in having that state of the art shape if the Optisym can't back it up with performance, but thanks to the advanced construction, that's not an issue with this board. Utilising the Whiplash profiled Powercore II featuring the all-new Powerwall technology, freestyle friendly Bi-Lite laminates & park proof Premium extruded FH base, the Optisym has all the performance you could ever need. So if you're after a board that perfectly blends the characteristics of a freestyle board with the all-terrain versatility of an all-mountain board, then the new Optisym could just be your perfect board. Rider Style Freestyle riders looking for the ultimate high-performance freestyle board that delivers outstanding control, response & feel over the whole mountain. Shape Overview The Optisym’s state of the art balanced twin chassis features a complex asymmetric sidecut. This innovative technology modifies the sidecut by adding a deeper profile on the heelside edge, offsetting the bodies inability to power up the heel edge to the same degree as the toe edge. This results in a more efficient overall ride, inspiring you to push the board & ride to the limit, all without compromising the freestyle balance of the board. To ensure the Optisym offers as much stability as possible & means that you can crank it through turns without worrying about toe or heel drag, it utilises a mid-wide riding platform. Profile: True Camber Cam-Out Camber is a traditional camber with early & smooth transitions into tip andtail. Those early rise tips allow snow to flow under the nose, reduce drag, & ensure the board comes onto the plane quickly & easily. The regular camber allows the rider to power up the sidecut across its entire length, creating a stable & reassuring ride on edge. Dual Degressive sidecut In terms of sidecut, the Optisym utilises the advanced Dual Degressive sidecut. This sidecut blends a smaller radius in the centre with two larger ones in the tip & tail, making it loose & playful— Nitro's most forgiving sidecut. Construction Heading up the Optisym’s high-quality construction is the Powercore II. This is a tip-to-tail poplar wood core with additional beech wood stringers. This combination delivers the perfect balance ofstrength, smooth response & insane snap. Nitro then mill the core with their Whiplash core profiling to give the board its park riding characteristics. This advanced profiling reduces thickness between the feet to give the board a more predictable flex through the centre whilst adding thickness outside the bindings for added pop & pressing performance. Now to give the Optisym its freestyle flex, Nitro form the structural layers from their playful Bi-Lite glass. This torsionally softer creates a playful yet responsive ride, perfect for this type of board. To enhance the Optisym’s freestyle credentials even further, it utilises Nitro's new Ureshred sidewalls. This advanced Urethane sidewall helps dampen the edges & increases sidewall strength to resist impacts. The heelside edge is then boosted with the Asym specific Powerwall, which beefs up the size & strength of the sidewall, allowing you to get onto & off the heel edge quicker & more efficiently. Now add the more robust & durable Railkiller edges, which are more resistant to damage, & you have the perfect construction for a high-performance all-terrain freestyle board. Baseextruded FH Base. This durable, low maintenance base is perfect for urban & rail focussed boards as it takes loads of abuse & is easy to repair. ...

Pe AK skins are pre-cut to match the Nomad shapes & are built to last without breaking your bank using solvent-free Hot-Melt technology. Comes complete with fixings to attach into the pre drilled holes on the Nomad board. ...

Pe AK skins are pre-cut to match the Nomad shapes & are built to last without breaking your bank using solvent-free Hot-Melt technology. Comes complete with fixings to attach into the pre drilled holes on the Nomad board. ...

Designed to deliver a predictable & effortless ride across the whole mountain, the Prime Raw is the perfect choice for any rider who wants to strap in & get out & ride everything & anything. No matter if you're a novice or a more experienced rider, this easy-going snowboard is going to have you back all the time. Built around a progression-friendly Directional Shape, the Prime Raw allows riders of all skill levels to drop into the unknown confidently. The Flat-Out Rocker's catch-free ride allows riders to learn new tricks in the park day after day with less chance of catching your edge. The Prime is built for riders who want to skip through the basics & get after it on a board that will progress with them year after year. Rider Style Riders who want to ride absolutely everything the mountain can throw at them but who also want an easy-going & confidence-inspiring ride. Shape Overview The Prime Raw's all-terrain friendly directional shape delivers a versatile ride across the whole mountain. Built around a mid-width platform, it delivers a confidence-inspiring stable ride allowing you ride absolutely everything with ease. That slightly wider platform ensures toe & heel drag isn't an issue again, inspiring confidence. The Radial sidecut gives the board a predictable feel on edge. With a radius running towards the tighter side of medium, the Prime Raw delivers the perfect balance of tight & long radius turns. Profile: Flat Out Flat-Out Rocker is a hybrid flat camber profile where the nose & tail lift off before the traditional contact points, providing effortless turns & catch-free manoeuvres. The liftednose & tail provide excellent float, pressability, & forgiveness in any terrain. The ultimate hybrid between Zero Camber & Reverse Camber means that you can have the most playful yetstable ride for easy progression & all-mountain domination. Construction Heading up the Prime Raw's quality construction is the Powercore. This uses tip-to-tail poplar wood, providing lightweight strength & the perfect blend of flex, response & feel. The structural layers are formed from Bi-Lite glass. This torsionally softer glass creates a playful yet responsive ride, making the Prime Raw effortless to ride & more forgiving, ensuring those this is one board that's going to let you stay out all day without wiping you out. Base Premium extruded FH Base. Durability, speed & low maintenance all in one ultra clear base material. ...