United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Heating
Archived Product
- Inset fire with
unique Optiflame® Plus
effect - Fits standard
16? and 18?
fireplace
Availability: In Stock
£259.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Linear Series Landscape
gas fire with catalytic
system (No flue or
chimney required) 8mm
diameter gas inlet Flame
failure device Piezo
spark ignition Oxygen
depletion sensor and
control valve mounted on
lower right hand side
Designed for minimum room
size of 23 metres cubed
Requires minimum
clearance of 100mm each
side 60mm bellow and
800mm above For use with
natural gas G20 CAT 12H
Stainless steel trim
Dimensions: 482 x 702 x
149mm (H x W x D)
Availability: In Stock
£869.99
Archived Product
-
Dimplex GDS1A 120cm Wide
Fully Integrated Holwell
Surround Dimplex GDS1A
120cm Wide Fully
Integrated Holwell
Surround with Black back
panel and hearth. Also
known as GDS-1-A GDS
GDS1. FEATURES Fully
assembled surround back
panel and hearth purpose
designed for use with
Dimplex Optiflame? fires
No structural alterations
needed as surround is
freestanding ? all you
need is a flat wall and a
power point for the fire
For use with electric
fires only Surround
finished in maple effect
with textured black back
panel and hearth
Compatible with all of
the current Dimplex 16/18
inset fires Model No.
GDS1A SPECIFICATIONS
Finish of Surround: Maple
effect Finish of Back
Panel: Black back panel
and hearth Dimensions and
Weight Product Dimensions
(H x W x D): 1120 x 1200
x 402mm Fire aperture (H
x W x D): 559 x 432 x
278mm Weight of Surround:
43kg
Availability: In Stock
£239.99
Archived Product
-
Dimplex DTW4M Fully
Integrated Under-Tile
Heating Mat Dimplex DTW4M
Fully Integrated
Under-Tile Heating Mat
with Twin Core cable.
Also known as DTW4M
DTW-4M DTW-4-M. FEATURES
Design Freedom - By being
concealed under the tiled
floor under-tile heating
frees you to plan rooms
and arrange furniture as
you want allowing a great
deal of flexibility.
Flexible Control -
Because Dimplex
under-tile heating is
controlled independently
of the main heating
system it offers maximum
flexibility. Separate
settings can be
programmed whether you
are in out or even on
holiday and the early
start function always
ensures the floor has
reached your chosen
temperature when you want
it. Safety and
Practicality - A warm
tiled floor helps spills
to dry quickly avoiding
slip-ups in bathrooms and
kitchens promoting a
safer environment for all
the family.
SPECIFICATIONS Area:
4.0m2 Output: 520W Twin
Core 160W/m2 cable The
Dimplex thermostatic
controller has maximum
load of 15A All
installations should be
carried out by a
qualified electrician in
accordance with the
current wiring
regulations All
installations require an
RCD (residual current
device) for safe
operation Dimplex
strongly recommends the
use of 10mm insulating
tile backer board to
maximize system
performance Fully
screened for use in
bathrooms or other wet
areas Two layers of
insulation for maximum
cable life Easy to cut
mesh backing that can be
removed for small and
awkward areas Connecting
more than two mats to a
controller requires the
use of a standard
electrical junction box
The Dimplex thermostatic
controller comes complete
with a floor sensing
probe The Dimplex
under-tile heater can be
fitted to: - Timber
suspended floors -
Concrete solid floors
Dimensions Product
Dimensions (W x D x L):
500 x 3 x 8000mm
Availability: In Stock
£239.99
Available
- Less than 150mm
(6" deep) - 3.4
Kw - Smooth curved
styling - User
selects
Availability: In Stock
£459.99
Archived Product
-
Dimplex FXL18i 80cm Wide
Storage Heaters in White
Dimplex FXL18i 80cm Wide
Storage Heaters in White
With Heat Retention and
Automatic Charging. Also
Know FXL18i FXL 18i.
FEATURES Heat Retention -
The core heat storage
bricks are enclosed by
insulation panels
providing approximately
2.5 times more heat
retention than
conventional storage
heaters. Core Discharge -
Achieved by a low noise
centrifugal type fan
drawing air through the
hot core. The fan is
switched by the room
thermostat to allow heat
output on demand.
Automatic Charging -
Charging is regulated by
a unique system
monitoring both room
temperature and the state
of the storage core.
Boost Heating - Provided
by a supplementary
element which will only
operate when the useful
core heat is exhausted.
Storage Core - High
density bonded magnetite
bricks. Heating Elements
- Sheathed type. Core
Extract Fan - Low noise
centrifugal type. Direct
Acting Heater - Integral
fan boost element. User
Controls - Manually
adjustable room
temperature thermostat.
On/Off switch for boost.
SPECIFICATIONS Compact
design little larger than
conventional storage
heaters. Simple controls
for ease of use. Requires
little or no top up from
day energy resulting in
lower annual running
costs. Can add up to 6
points to a propertys SAP
energy rating. Built in
boost element for
supplementary heating.
Automatic charging
provides excellent
economy on all tariffs.
High fan speed selectable
for faster core discharge
in commercial
environments. Accurate
thermostatic control of
room temperature. Fan
operation can be
controlled by external
timer such as one of
Dimplexs RF thermostat
kits. Requires both off
peak and 24 hour
electrical supplies.
Secure wall fixing for
safety. Feet may be
fitted under carpet or on
top of suitable floor
covering. Simple assembly
for flexible positioning
and quick installation.
Compatible with all off
peak tariffs. Improved
energy performance rating
Storage input loading:
2.55kW Direct acting
loading: 1.5kW No. of
bricks: 12 Dimensions and
Weight Product Dimensions
(H x W x D): 700 x 788 x
183mm Weight without
bricks: 26kg Weight:
116kg
Availability: In Stock
£749.99
Archived Product
-
Dimplex DNV20AB 55cm Wide
Opti Myst Inset Fire
Danville in Antique Brass
Dimplex DNV20AB 55cm Wide
Opti Myst Inset Fire
Danville in Antique Brass
With Fan Heater. Also
known as DNV20AB DNV
20AB. FEATURES Inset fire
with unique Opti-myst
smoke and flame effect
Fully variable flame and
smoke intensity control
Silent flame and smoke
effect operation 2kW fan
heater with choice of two
heat settings Thermostat
Remote control Quick-fit
IEC (kettle-type)
connection Optional
spacer (OSP002) available
at extra cost allows use
flat-to- wall Opti-myst
effect can be used
independently of heat
SPECIFICATIONS Fan heater
Choice of heat setting
Thermostat Remote Control
Fitted plug Opti-myst
effect can be used
independently of heat
Flame/Fuel Effect -
Opti-myst logs effect
Style: Inset Output:
2.0kW Power consumption
effect: 212 Watts
Dimensions Product
Dimensions (H x W x D):
620 x 520 x 231mm Depth
of inset: 65mm
Availability: In Stock
£419.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Catalytic system (No flue
or chimney required)8mm
diameter gas inlet Flame
failure device Piezo
spark ignition Oxygen
depletion sensor and
control valve mounted on
lower right hand side
Designed for minimum room
size of 23 metres cubed
Requires minimum
clearance of 100mm each
side 60mm bellow and
800mm above For use with
natural gas G20 CAT 12H
Stainless steel trim
Dimensions: 590 x 526 x
149mm (H x W x D)
Availability: In Stock
£689.99
Archived Product
- Fan heater
- Electronic stat
- Remote control
- Thermostat
- Fitted
plug - Flame
Availability: In Stock
£269.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Flueless Landscape
Minimum Room size - 30m?
G20 Natural Gas CAT I2H
Ventilation Required -
100cm? Gas inlet
Restrictor Elbow 8mm
Ignition Piezo Spark
Safety - Oxygen Depletion
Sensor / Flame Failure
Device Inlet Pressure (+
2.0 mbar) 20 mbar Max
Energy input (Gross)
2.6kW Max Energy Input
(Net) 2.35kW Max Gas Rate
0.25M?/h Min Energy Input
(Gross) 1.5kW Min Energy
Input (Net) 1.35kW Pilot
Energy Input (Gross) 166W
Pilot Energy (Net) 150W
Finished in Dark Blue
Dimensions: 550 x 800 x
186mm (H x W x D)
Availability: In Stock
£699.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Flueless Landscape
Minimum Room size - 30m?
LPG Gas Ventilation
Required - 100cm? Gas
inlet Restrictor Elbow
8mm Ignition Piezo Spark
Safety - Oxygen Depletion
Sensor / Flame Failure
Device Inlet Pressure (+
2.0 mbar) 20 mbar Max
Energy input (Gross)
2.6kW Max Energy Input
(Net) 2.35kW Max Gas Rate
0.25M?/h Min Energy Input
(Gross) 1.5kW Min Energy
Input (Net) 1.35kW Pilot
Energy Input (Gross) 166W
Pilot Energy (Net) 150W
Finished in Cream
Dimensions: 550 x 800 x
186mm (H x W x D)
Availability: In Stock
£699.99
Archived Product
- Slimline panel
radiators that provide
great background warmth - 800W heat
output
Availability: In Stock
£89.99
Archived Product
- Designed
specifically for use in
wet areas such as
bathrooms - Suitable
for use
Availability: In Stock
£209.99
Archived Product
- Mid-sized
cast-iron style electric
stove - Controls
concealed behind opening
door
Availability: In Stock
£159.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£139.99
Archived Product
- Fan heater
- Choice of heat
setting - Fitted plug
- Flame effect
independent
Availability: In Stock
£139.99
Archived Product
-
Dimplex DAN20AB-LED 55cm
Wide Inset Fires
Danesbury in Antique
Brass Dimplex DAN20AB-LED
55cm Wide Inset Fires
Danesbury in Antique
Brass With Fan Heater.
Also known as DAN20AB-LED
DAN20ABLED FEATURES Inset
fire with unique
Optiflame effect LED low
energy effect
(DAN20AB-LED model only)
Supplied with real coal
2kW fan heater with
choice of two heat
settings and thermostat
Flame effect only energy
consumption of just 7W
(DAN20AB-LED model only)
Running cost of just £2
per annum on effect only
(DAN20AB-LED model only)
Flame effect can be used
independently of heat
Controls concealed
beneath lift-up canopy
Quick-fit IEC (kettle
type) connection
(DAN20AB-LED model only)
Inset depth of just 55mm
fully inset or can be
used flat-to-wall using
spacer provided Designed
to fit 16" and
18" fireplaces and
all conventional flues
SPECIFICATIONS Fan heater
Choice of heat setting
Thermostat Fitted plug
Flame effect independent
of heat BEAB approval
Flame/Fuel Effect -
Optiflame real coals
Style - Inset Output -
2.0 kW Power consumption
effect - only 7W for LED
model and 130W for all
other models Dimensions
Prodoct Dimensions (H x W
x D): 620 x 518 x 170mm
Depth of inset: 55mm
Availability: In Stock
£309.99
Available
- Optiflame effect
- Wall mounted fan
heater - 3 settings
(including flame
only)
Availability: In Stock
£479.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Flueless Landscape
Minimum Room size - 30m?
G20 Natural Gas CAT I2H
Ventilation Required -
100cm? Gas inlet
Restrictor Elbow 8mm
Ignition Piezo Spark
Safety - Oxygen Depletion
Sensor / Flame Failure
Device Inlet Pressure (+
2.0 mbar) 20 mbar Max
Energy input (Gross)
2.6kW Max Energy Input
(Net) 2.35kW Max Gas Rate
0.25M?/h Min Energy Input
(Gross) 1.5kW Min Energy
Input (Net) 1.35kW Pilot
Energy Input (Gross) 166W
Pilot Energy (Net) 150W
Finished in Black
Dimensions: 550 x 800x
186mm (H x W x D)
Availability: In Stock
£699.99
Archived Product
- Fan heater
- Choice of heat
setting - Fitted plug
- Flame effect
independent
Availability: In Stock
£189.99
Archived Product
- Fan heater
- Choice of heat
setting - Thermostat
- Fitted plug
- Flame
effect
Availability: In Stock
£269.99
Archived Product
- Fan heater
- Choice of heat
setting - Fitted plug
- Flame effect
independent
Availability: In Stock
£259.99
Archived Product
-
Dimplex DTW6M Fully
Integrated Under-Tile
Heating Mat Dimplex DTW6M
Fully Integrated
Under-Tile Heating Mat
with Twin Core cable and
780 Watt output. Also
known as DTW6M DTW-6M
DTW-6-M. FEATURES Design
Freedom - By being
concealed under the tiled
floor under-tile heating
frees you to plan rooms
and arrange furniture as
you want allowing a great
deal of flexibility.
Flexible Control -
Because Dimplex
under-tile heating is
controlled independently
of the main heating
system it offers maximum
flexibility. Separate
settings can be
programmed whether you
are in out or even on
holiday and the early
start function always
ensures the floor has
reached your chosen
temperature when you want
it. Safety and
Practicality - A warm
tiled floor helps spills
to dry quickly avoiding
slip-ups in bathrooms and
kitchens promoting a
safer environment for all
the family.
SPECIFICATIONS Area:
6.0m2 Output: 780W Twin
Core 160W/m2 cable The
Dimplex thermostatic
controller has maximum
load of 15A All
installations should be
carried out by a
qualified electrician in
accordance with the
current wiring
regulations All
installations require an
RCD (residual current
device) for safe
operation Dimplex
strongly recommends the
use of 10mm insulating
tile backer board to
maximize system
performance Fully
screened for use in
bathrooms or other wet
areas Two layers of
insulation for maximum
cable life Easy to cut
mesh backing that can be
removed for small and
awkward areas Connecting
more than two mats to a
controller requires the
use of a standard
electrical junction box
The Dimplex thermostatic
controller comes complete
with a floor sensing
probe The Dimplex
under-tile heater can be
fitted to: - Timber
suspended floors -
Concrete solid floors
Dimensions Product
Dimensions (W x D x L):
500 x 3 x 12000mm
Availability: In Stock
£319.99
Archived Product
- Freestanding
fire with Optiflame
effect - Supplied with
white pebbles and real
coals
Availability: In Stock
£139.99
Available
- Stylish black
canopy - Flickering
flame log effect - 2kW
of radiant heat
with
Availability: In Stock
£209.99
Archived Product
- Opti-Myst flame
and smoke effect - Multiple worldwide
patents pending - Fully
Availability: In Stock
£679.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£149.99
Available
- Freestanding and
inset - Convenient high
level controls - Solid
brass front
and
Availability: In Stock
£169.99
Available
- Optiflame effect
- Wall mounted fan
heater - 3 settings
(including flame
only)
Availability: In Stock
£479.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Flueless Landscape
Minimum Room size - 30m?
G20 Natural Gas CAT I2H
Ventilation Required -
100cm? Gas inlet
Restrictor Elbow 8mm
Ignition Piezo Spark
Safety - Oxygen Depletion
Sensor / Flame Failure
Device Inlet Pressure (+
2.0 mbar) 20 mbar Max
Energy input (Gross)
2.6kW Max Energy Input
(Net) 2.35kW Max Gas Rate
0.25M?/h Min Energy Input
(Gross) 1.5kW Min Energy
Input (Net) 1.35kW Pilot
Energy Input (Gross) 166W
Pilot Energy (Net) 150W
Finished in Cream
Dimensions: 550 x 800 x
186mm (H x W x D)
Availability: In Stock
£699.99
Archived Product
- Ladder design
maximises capacity for
hanging damp towels and
clothes - Slim
vertical
Availability: In Stock
£439.99
Available
- Fitted
Plug - Flame Effect
Independent of Heat
Source. - Unique
Optiflame®
Plus
Availability: In Stock
£269.99
Available
- Inset fire with
unique Optiflame effect - Supplied with large
white pebbles
and
Availability: In Stock
£319.99
Archived Product
- Opti-myst flame
and smoke effect - Fully variable flame
and smoke intensity
control
Availability: In Stock
£809.99
Archived Product
- Inset fire with
unique Optiflame effect - Supplied with large
white pebbles
and
Availability: In Stock
£319.99
Available
- Attractive
cherry finish surround - Flickering flame coal
effect - 2kW of
radiant
Availability: In Stock
£219.99
Available
- Wall mounted
- Warming fireglow
illumination even when
heating elements are
switched
Availability: In Stock
£149.99
Archived Product
- Wall mounted
- Warming fireglow
illumination even when
heating elements are
switched
Availability: In Stock
£119.99
Archived Product
- Finished in
Brushed Steel with
Contemporary front and
trim - Maximum heat
output
Availability: In Stock
£139.99
Archived Product
- 2.0kW Output
- Thermostatically
controlled with frost
protection - Choice of
2
Availability: In Stock
£79.99
Archived Product
- Chrome Trim with
chrome front and fret - Maximum heat output
of 2.0 kW - Remote
Availability: In Stock
£149.99
Archived Product
-
Dimplex DTW1M Fully
Integrated Under-Tile
Heating Mat Dimplex DTW1M
Fully Integrated
Under-Tile Heating Mat
with Twin Core cable.
Also known as DTW-1-M
DTW-1M DTW1-M. FEATURES
Design Freedom - By being
concealed under the tiled
floor under-tile heating
frees you to plan rooms
and arrange furniture as
you want allowing a great
deal of flexibility.
Flexible Control -
Because Dimplex
under-tile heating is
controlled independently
of the main heating
system it offers maximum
flexibility. Separate
settings can be
programmed whether you
are in out or even on
holiday and the early
start function always
ensures the floor has
reached your chosen
temperature when you want
it. Safety and
Practicality - A warm
tiled floor helps spills
to dry quickly avoiding
slip-ups in bathrooms and
kitchens promoting a
safer environment for all
the family.
SPECIFICATIONS Output:
160W Area: 1.0m2 Twin
Core 160W/m2 cable The
Dimplex thermostatic
controller has maximum
load of 15A All
installations should be
carried out by a
qualified electrician in
accordance with the
current wiring
regulations All
installations require an
RCD (residual current
device) for safe
operation Dimplex
strongly recommends the
use of 10mm insulating
tile backer board to
maximize system
performance Fully
screened for use in
bathrooms or other wet
areas Two layers of
insulation for maximum
cable life Easy to cut
mesh backing that can be
removed for small and
awkward areas Connecting
more than two mats to a
controller requires the
use of a standard
electrical junction box
The Dimplex thermostatic
controller comes complete
with a floor sensing
probe The Dimplex
under-tile heater can be
fitted to: - Timber
suspended floors -
Concrete solid floors
Dimensions Product
Dimensions (W x D x L):
500 x 3 x 2000mm
Availability: In Stock
£99.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£209.99
Archived Product
- Wall mounted
- Warming fireglow
illumination even when
heating elements are
switched
Availability: In Stock
£89.99
Available
- Fitted
Plug - Flame Effect
Independent of Heat
Source - Unique
Optiflame®
Plus
Availability: In Stock
£269.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Catalytic system (No flue
or chimney required)8mm
diameter gas inlet Flame
failure device Piezo
spark ignition Oxygen
depletion sensor and
control valve mounted on
lower right hand side
Designed for minimum room
size of 23 metres cubed
Requires minimum
clearance of 100mm each
side 60mm bellow and
800mm above For use with
LPG Gas Stainless steel
trim Dimensions: 590 x
526 x 149mm (H x W x D)
Availability: In Stock
£689.99
Available
-
What is a Flueless gas
fire? Flueless fires
incorporate the latest in
gas fire technology and
do not need a chimney or
flue to operate. Instead
the combustion gases pass
through a catalytic
converter system
positioned at the top of
the appliance which
converts carbon monoxide
into harmless carbon
dioxide and water vapour
levels of which are so
low they are typically
present in fresh air. In
fact the catalytic
converter works so
effectively that it can
actually help to clean
the air by neutralising
airborne particles and
odours therefore helping
to reduce household
allergies. This Smeg
flueless fire can be
placed in any room of
your home excluding the
bathroom where a standard
8mm Gas pipe is present
providing it has adequate
ventilation a minimum
room size of 23-30 cubic
metres and 10cm clearance
on either side of the
fire 80cm from fire to
ceiling and 6cm to the
floor. Please Note: This
must be installed by a
registered Corgi Engineer
Flueless Landscape
Minimum Room size - 30m?
LPG Gas Ventilation
Required - 100cm? Gas
inlet Restrictor Elbow
8mm Ignition Piezo Spark
Safety - Oxygen Depletion
Sensor / Flame Failure
Device Inlet Pressure (+
2.0 mbar) 20 mbar Max
Energy input (Gross)
2.6kW Max Energy Input
(Net) 2.35kW Max Gas Rate
0.25M?/h Min Energy Input
(Gross) 1.5kW Min Energy
Input (Net) 1.35kW Pilot
Energy Input (Gross) 166W
Pilot Energy (Net) 150W
Finished in Dark Blue
Dimensions: 550 x 800 x
186mm (H x W x D)
Availability: In Stock
£699.99
Archived Product
- Electronic
thermostatic control,
providing room
temperature stability to
+/-0.3°C
Availability: In Stock
£209.99
Archived Product
-
Dimplex DTW3M Fully
Integrated Under-Tile
Heating Mat Dimplex DTW3M
Fully Integrated
Under-Tile Heating Mat
with Twin Core cable.
Also known as DTW3M
DTW-3M DTW-3-M. FEATURES
Design Freedom - By being
concealed under the tiled
floor under-tile heating
frees you to plan rooms
and arrange furniture as
you want allowing a great
deal of flexibility.
Flexible Control -
Because Dimplex
under-tile heating is
controlled independently
of the main heating
system it offers maximum
flexibility. Separate
settings can be
programmed whether you
are in out or even on
holiday and the early
start function always
ensures the floor has
reached your chosen
temperature when you want
it. Safety and
Practicality - A warm
tiled floor helps spills
to dry quickly avoiding
slip-ups in bathrooms and
kitchens promoting a
safer environment for all
the family.
SPECIFICATIONS Area:
3.0m2 Output: 390W Twin
Core 160W/m2 cable The
Dimplex thermostatic
controller has maximum
load of 15A All
installations should be
carried out by a
qualified electrician in
accordance with the
current wiring
regulations All
installations require an
RCD (residual current
device) for safe
operation Dimplex
strongly recommends the
use of 10mm insulating
tile backer board to
maximize system
performance Fully
screened for use in
bathrooms or other wet
areas Two layers of
insulation for maximum
cable life Easy to cut
mesh backing that can be
removed for small and
awkward areas Connecting
more than two mats to a
controller requires the
use of a standard
electrical junction box
The Dimplex thermostatic
controller comes complete
with a floor sensing
probe The Dimplex
under-tile heater can be
fitted to: - Timber
suspended floors -
Concrete solid floors
Dimensions Product
Dimensions (W x D x L):
500 x 3 x 6000mm
Availability: In Stock
£199.99
Archived Product
-
Dimplex MCF15ER 30cm Wide
MicroFire Eye in Red
Dimplex MCF15ER 30cm Wide
MicroFire Eye with red
contemporary finish and
1.5kW output. Also known
as MCF-15-ER MCF-15ER
MCF15-ER. FEATURES
Freestanding fire with
Optiflame? coal effect
750W or 1.5kW fan heat
selection Overheat safety
cut-out Carry handle on
the back Choice of two
heat settings Flame
effect can be used
independently of heat
source Choice of
finishes: MCF15ER - red
gloss SPECIFICATIONS
Flame/Fuel Effect:
Optiflame? coal effect
Colour Finish: Red
contemporary finish Style
- Freestanding Output
1.5kW Fan heater Choice
of heat setting Safety
Cut out Fitted plug Flame
effect independent of
heat BEAB approval
Dimensions and Weight
Product Dimensions (H x W
x D): 350 x 297 x 168mm
Weight of Surround: 5.5kg
Availability: In Stock
£79.99
Archived Product
-
Dimplex MCF15EB 30cm Wide
MicroFire Eye in Black
Dimplex MCF15EB 30cm Wide
MicroFire Eye with black
contemporary finish and
1.5kW output. Also known
as MCF-15-EB MCF-15EB
MCF15-EB. FEATURES
Freestanding fire with
Optiflame? coal effect
Overheat safety cut-out
Carry handle on the back
Choice of two heat
settings Flame effect can
be used independently of
heat source Choice of
finishes: MCF15EB - black
gloss SPECIFICATIONS
Flame/Fuel Effect:
Optiflame? coal effect
Colour Finish: Black
contemporary finish Style
- Freestanding 750W or
1.5kW fan heat selection
Fan heater Safety Cut out
Fitted plug BEAB approval
Dimensions and Weight
Product Dimensions (H x W
x D): 350 x 297 x 168mm
Weight of Surround: 5.5kg
Availability: In Stock
£79.99
Archived Product
- Electronic
thermostatic control,
providing room
temperature stability to
+/-0.3°C
Availability: In Stock
£129.99
Archived Product
- Electronic
thermostatic control,
providing room
temperature stability to
+/-0.3°C
Availability: In Stock
£139.99
Archived Product
- Free-standing
suite with integral
Optiflame log fire - 2kW fan heater with
choice
Availability: In Stock
£329.99
Archived Product
- These compact,
durable heaters are ideal
for use virtually
anywhere a low level
of
Availability: In Stock
£79.99
Archived Product
- Fan heater
- Choice of heat
setting - Thermostat
- Fitted plug
- Flame
effect
Availability: In Stock
£309.99
Archived Product
- 1.5kW Output
- Thermostatically
controlled with frost
protection - Choice of
2
Availability: In Stock
£69.99
Archived Product
- This model is
for wall mounting only,
cannot be recessed - Fan heater
- Choice
Availability: In Stock
£349.99
Archived Product
Dimplex MZT20BL
''Mozart'' 2kW
Electric Suite With Gloss
Black Surround And Marble
Effect Back Panel
''Mozart'' 2kW
Electric Suite With Gloss
Black Surround And Marble
Effect Back Panel
- Free-standing
suite with integral
Optiflame log fire - 2kW fan heater with
choice
Availability: In Stock
£369.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£99.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£109.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£119.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£129.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£89.99
Archived Product
- Thermostatic
control of room
temperature - Safe,
reliable and requires
little or
Availability: In Stock
£99.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£99.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£89.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£129.99
Archived Product
- Finished in pure
white to complement
DuoHeat radiators - Convected heat for
rapid
Availability: In Stock
£129.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£109.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£99.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£129.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£119.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£99.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£139.99
Archived Product
- Finished in pure
white to complement
DuoHeat radiators - Convected heat for
rapid
Availability: In Stock
£139.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£119.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£109.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£139.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£149.99
Archived Product
- Finished in pure
white to complement
DuoHeat radiators - Convected heat for
rapid
Availability: In Stock
£139.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£139.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£159.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£169.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£79.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£89.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£119.99
Archived Product
- Suitable for
both domestic and
commercial applications - Compact stylish
casing
Availability: In Stock
£169.99
Archived Product
-
Dimplex RKT20 55cm Wide
Fully Integrated Inset
Fires Rockport Dimplex
RKT20 55cm Wide Fully
Integrated Inset Fires
Rockport With Fan Heater.
Also known as RKT20 RKT
20. FEATURES Optiflame
LED low energy effect
with coal and white
pebbles Near silent
operation of the flame
effect Flame effect only
- energy consumption of
just 7 Watts Running cost
of less than £2 per
annum on effect only LEDs
have an expected lifespan
of 50 000 hours Inset
depth of just 55mm
without spacer 2kW fan
heater with choice of two
heat settings Thermostat
Can be used flat-to-wall
with 60mm spacer provided
Quick-fit IEC (kettle
type) connection Polished
cast iron finish with
stainless steel effect
canopy Designed to fit
16" and 18"
fireplaces and all
conventional flues
SPECIFICATIONS Fan heater
Choice of heat settings
Fitted plug Flame effect
can be used independently
of heat BEAB approval
Flame/Fuel Effect -
Optiflame with white
pebbles or coal
effectStyle - InsetOutput
- 2.0kWPower consumption
effect - only 7 watts
Dimensions Product
Dimensions (H x W x D):
635 x 516 x 185mm Depth
of inset: 55mm
Availability: In Stock
£369.99
Available
- Freestanding fire
with Optiflame effect. - Comes with choice of
pebbles and
coal.
Availability: In Stock
£189.99
Archived Product
- Finished in pure
white to complement
DuoHeat radiators - Convected heat for
rapid
Availability: In Stock
£119.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£89.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£119.99
Archived Product
- Opti-myst flame
and smoke effect - Fully variable flame
and smoke intensity
control
Availability: In Stock
£459.99
Available
- Cast-iron style
stove finished in black. - Choice of unique
Optiflame® Plus
flame
Availability: In Stock
£249.99
Archived Product
- Finished in
willow white to match XL
storage heaters - Convected heat for
rapid
Availability: In Stock
£99.99
Denmark