A natural Arkansas stone polishes & sharpens edges at the same time, making it a handy little tool for the dedicated ski/snowboard workshop enthusiast.75mm x 25 mm in size, it is a long lasting tool thanks to the natural properties of the stone, & also helps with taking down of case hardened areas of steel edges, & rust removal. It comes in a protective leather sleeve.
Material: Natural hard Arkansas stone Other: Comes with leather protective pouch Our Opinion Not so common in ski & snowboard workshops, but it is in ours & it comes in handy time & time again. Is This For Me? For the person after perfect ski & board edges, this tool is the icing on the cake
...

The  Holmenkol  Bronze base brush means that you can deep clean your ski & snowboard bases prior to rewaxing, without altering the structure as deeply as a steel wire brush. A perfect compliment to a Nylon & Horsehair brush this should be in every ski techs tool box. Features medium-hard brass bristles with a soft nylon border for protection. Ideal for deep cleaning of bases after using a wax remover, prior to fresh waxing.   ...

For over 80 years, Holmenkol has been dedicated to the production of the finest ski waxes available. Today, they lead the way, with the introduction of nano technology, combining sport with ground breaking science to produce a comprehensive line of waxes & tools, proven in World Cup use, & suitable for all types of winter sports enthusiasts. The Holmenkol Base File Guide is a fully adjustable tool for accurate setting of the base edge angle, from 0.5 degrees to 1.5 degrees.

Material: Alloy main body with plastic adjuster & slider for easier movement along the base   (Please note that this does not come with a file & you can either use the file from your side edge tool or you will need to purchase one separately)   Our Opinion If you are serious about maintaining the edges of your snowboard or skis, this tool means that you can fit most ski tuning files, so that you can set your geometry, repair any nicks, or polish with a diamond file. Perfect for the more experienced home ski tech! Is This For Me? If you are servicing your own kit, & want a perfect tune of your edges, then this tool combined with a side edge tool are the tools you need to do an accurate job safely.

...

combining sport with ground breaking science to produce a comprehensive line of waxes & tools, proven in World Cup use, & suitable for all types of winter sports enthusiasts. A high quality hot wax for colder snow conditions (-14°C to -4°C) Holmenkol Beta Mix Red wax is also a good wax for use on synthetic snow such as in Snow Domes due to synthetic snows more abrasive nature. Comes in handy storage box, 2x 35g blocks for reduced travelling size

Material: Beta mix Hydrocarbon Wax Packaging: Comes complete with plastic storage box Weight: 2x 35 g block for convenient travelling Notes: Iron temperature 125°C-135°C Our Opinion Another easy to apply wax from Holmenkol with hydrocarbon content. As a harder wax, it copes with lower temperatures with ease, & can be mixed with other Holmenkol hydrocarbon waxes to produce a finish for specific conditions. With this temperature range this is a highly versatile wax & a favourite here. Is This For Me? For those skiing in colder conditions, or wishing to add some initial protection to their bases before applying a universal wax.

...

A high quality hot wax for colder snow conditions (-14°C to -4°C) Holmenkol Beta Mix Red wax is also a good wax for use on synthetic snow such as in Snow Domes due to synthetic snows more abrasive nature. Comes in handy storage box, 1 workshop lock of 150 grams.

Material: Beta mix Hydrocarbon Wax Packaging: Comes complete with plastic storage box Weight: 1 150 g block for workshop use Notes: Iron temperature 125°C-135°C   Our Opinion Another easy to apply wax from Holmenkol with hydrocarbon content. As a harder wax, it copes with lower temperatures with ease, & can be mixed with other Holmenkol hydrocarbon waxes to produce a finish for specific conditions. With this temperature range this is a highly versatile wax & a favourite here. Is This For Me? For those skiing in colder conditions, or wishing to add some initial protection to their bases before applying a universal wax.

...

A universal ski & snowboard vice for easier servicing of snowboards and wide skis. It allows for fast & easy tuning & waxing, with 3 tuning positions
- flat, 90 degree & 60 degree. Made to last,  the vices come complete with integrated bench clamps, & are light enough to travel with if you wish to DIY tune while in resort. Contains 2 towers with integrated clamps.  
...

For over 80 years, Holmenkol has been dedicated to the production of the finest ski waxes available. Today, they lead the way, with the introduction of nano technology, combining sport with ground breaking science to produce a comprehensive line of waxes & tools, proven in World Cup use, & suitable for all types of winter sports enthusiasts. Holmenkol Care Fleece is ideal for polishing waxes once applied, without risk of damage to your board or skis. Care Fleece is essential when servicing skis & boards, it can be used as part of the cleaning process & for polishing. Single sheet. We also sell packs of 20 sheets.
Material: Tear resistant Fiberlene sheet
Size: Each sheet is 25.5 cm x 20.5 cm (8 x 10 inches) Our Opinion Great for use in the workshop, not only for waxing/polishing, but also for detecting nicks in edges without chopping your fingers up! The Care Fleece is tear resistant. Is This For Me? If you are servicing your own kit, & want a highly polished finish, then the Holmenkol Care Fleece is a useful addition to your tool box, & is long lasting.

...

Holmenkol  Fibre Fleece in a workshop sized 100 Metre roll. Fibre Fleece is ideal for base cleaning, waxing & polishing with high absorption rates & strength. As used in our own workshops. Contents: 1 roll of Care Fleece 20cm wide by 100 metres long.   ...