The Head Challenger is a brand new boot for this season & is the result of mixing perfect shape & legendary comfort. This boot is a tool that is designed for all mountain performance. mix perfect shape & legendary comfort. A tool made for top performance. Features & Benefits Flex Stance Tuning This boot features Flex tuning which means that you can easily switch between two flex ratings. This is great if you fancy one day honing around & the next crusing the easy slopes or following little ones around. It also acts as a forward lean adjustment so you can make the boot more aggressive. Double Power Buckles You are also getting “ Double Power Buckles”. The ergonomic Double Power Lever increases the leverage of the buckle by 100%, halving the effort required to buckle in. Spine-Flex Buckles Spineflex is a revolutionary buckle concept with a flexible element & a constant closure point. The flexible element allows the buckle to adapt to the shell profile & thus provide a homogeneous foot wrapping independent from the degree of closure. Adaptive Fit Technology Adaptive Fit Technology is the first & only ski boot technology that lets you change the width if your boot from a 104mm comfort/performance last to a 102mm precision/performance last with the turn of a screw 40mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all-around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. Power Ski Hike Provides the easiest selection of ski & hike mode available. Easy to identify & operate, yet providing a powerful connection between the cuff & shell for maximum precision & impulse transmission. Perfect Fit LIner Perfect Fit is the revolutionary customisation system that provides the best level of precision, comfort & durability. The PF material allows the liner to adapt to your feet, ensuring maximum power transmission.

Specification Last

Width: 99-101 (26.0) Instep: high Heel

Volume: low Toe

Volume: mid Flex: 110 Shell

Material: Polyurethane Buckles: 4 Micro adjustable Spineflex alloy buckles Liner: PF Heat Fit Pro  liner This a great new addition to the Head range for this year, with great features & simple use it is a great boot. Is it for me? This boot is aimed at the advanced/expert skier & is built around performance; however this boot is versatile enough to be used across the whole mountain.  









...

The Head Challenger is in its second season & was very well received in its first. This is the result of mixing perfect shape & legendary comfort. This boot is a tool that is designed for all mountain performance. Features & Benefits Flex Stance Tuning This boot features Flex tuning which means that you can easily switch between two flex ratings. This is great if you fancy one day honing around & the next crusing the easy slopes or following little ones around. It also acts as a forward lean adjustment so you can make the boot more aggressive. Spine-Tech Buckles You are also getting Heads spine-tech buckles which allows the buckle to be flexible & adapt to the shape of the shell profile, reducing the chances of getting any pressure points from the overlap. Adaptive Fit Technology Adaptive Fit Technology is the first & only ski boot technology that lets you change the width if your boot from a 104mm comfort/performance last to a 102mm precision/performance last with the turn of a screw 40mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all-around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. POWER SKI HIKE Provides the easiest selection of ski & hike mode available. Easy to identify & operate, yet providing a powerful connection between the cuff & shell for maximum precision & impulse transmission. Perfect Fit LIner Perfect Fit is the revolutionary customisation system that provides the best level of precision, comfort & durability. The PF material allows the liner to adapt to your feet, ensuring maximum power transmission.

Specification Last

Width: 99-101 (26.0) Instep: Mid Heel

Volume: Low Toe

Volume: Mid Flex: 110 Shell

Material: Polyurethane, Suprlight Buckles: 4 Micro adjustable Spinetech alloy buckles Liner: Perfect Fit S liner   This is a boot that is best for the mid volume foot but the plastics are very easy to work, with great features & simple use it is a great boot. Is it for me? This boot is aimed at the advanced skier & is built around performance; however this boot is versatile enough to be used across the whole mountain.









...

The Head Challenger is a brand new boot for this season & is the result of mixing perfect shape & legendary comfort. This boot is a tool that is designed for all mountain performance. mix perfect shape & legendary comfort. A tool made for top performance. Features & Benefits Flex Stance Tuning This boot features Flex tuning which means that you can easily switch between two flex ratings. This is great if you fancy one day honing around & the next crusing the easy slopes or following little ones around. It also acts as a forward lean adjustment so you can make the boot more aggressive. Double Power Buckles You are also getting “ Double Power Buckles”. The ergonomic Double Power Lever increases the leverage of the buckle by 100%, halving the effort required to buckle in. Spine-Flex Buckles Spineflex is a revolutionary buckle concept with a flexible element & a constant closure point. The flexible element allows the buckle to adapt to the shell profile & thus provide a homogeneous foot wrapping independent from the degree of closure. Adaptive Fit Technology Adaptive Fit Technology is the first & only ski boot technology that lets you change the width if your boot from a 104mm comfort/performance last to a 102mm precision/performance last with the turn of a screw 40mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all-around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. Power Ski Hike Provides the easiest selection of ski & hike mode available. Easy to identify & operate, yet providing a powerful connection between the cuff & shell for maximum precision & impulse transmission. Perfect Fit LIner Perfect Fit is the revolutionary customisation system that provides the best level of precision, comfort & durability. The PF material allows the liner to adapt to your feet, ensuring maximum power transmission.

Specification Last

Width: 99-101 (26.0) Instep: high Heel

Volume: low Toe

Volume: mid Flex: 120 Shell

Material: Polyurethane Buckles: 4 Micro adjustable Spineflex alloy buckles Liner: PF Heat Fit Pro  liner This a great new addition to the Head range for this year, with great features & simple use it is a great boot. Is it for me? This boot is aimed at the advanced/expert skier & is built around performance; however this boot is versatile enough to be used across the whole mountain.  









...

The new Head Collective 105 is an All-Mountain Freeride ski featuring Head’s new TTS Tip & Tail Stabiliser System for supreme float & control when off the sides. 105mm underfoot, the ski gives tonnes of float in powder & yet with ABS Sidewalls & a 60% camber underfoot can still tear up the pistes. This exo-skeleton tip & tail reduces swing weight & vibration whilst creating better pressure distribution on turn entry & exit. FEATURES & BENEFITS TTS is a stabilising exoskeleton which dampens the vibrations normally felt from rockered tips & tails also reducing the overall swing weight, & creates a ski with a playful yet high level of performance. The system is comprised of an elastomeric inlay for vibration control, as well as a glass fibre exoskeleton for stability & torsional strength. This combination not only reduced vibrations but creates better pressure distribution upon entry & exit of your turns, by minimising lateral flex of the skis. Reducing overall vibration means better edge control & therefore increases overall skiing performance. In addition, the reduction of core materials in the tip & tail has created a reduced swing weight for easier handling & manoeuvrability both on snow & in the air. All Ride Rocker
- Head place highly targeted amount of rocker in each model to ensure maximum performance for all ability levels. Steering is easier for all skiers & soft snow versatility is enhanced. 20% rocker
- 80% camber. A Sandwich Cap construction incorporates a traditional wood core & sidewall construction with an outer cap layer, for a blend of responsiveness & durability. Tuffwalls are impact resistant ABS Sidewalls, which maintain responsiveness but can also take a beating whilst offering a little damping too. ISS – Independent Suspension System, is a construction throughout the ski with damping at key points for a smoother ride when the going is chopped up underfoot.

Specification Sidecut: 146mm-105mm-128mm (For 181cm Length) Radius: 17.5 Metres (For 181cm length) Base Profile: Allride Rocker Ski Core: Sandwich wood core with capwall Bindings:  Tyrolia AAAdrenalin 16 Freeride Binding Long. Suitable for ski boot sole length of 300mm
- 360mm  SKI PROFILE Snow Conditions: Powder, All-Conditions Ski Terrain: All-Mountain, Off-Piste, Piste Skier Level: Strong Intermediate, Advanced, Expert IS IT FOR ME? For the Freeride skier who wants to still have good edge hold rather than going down the full-rocker path. Also ideal for those wanting to explore the back country by adding a touring mode binding. The Collective feels super smooth underfoot, whether in the powder or on the piste which is where full rocker skis can sometimes feel a bit ‘firm’. By keeping some camber, & with the damping system, this ski feels super smooth on & off the piste, & is a real eye-catching ski too! Very light for a 105mm ski thanks to those tips & tails.




...

The Cube³ is a redesign of the I-Type, still with the same volume & foot print, but with a few tweaks & feature changes in order to keep the boot fresh. The boot still has the hybrid rear-entry system that means that you can tilt the cuff back & step in easily. What they have done is changed the buckle layout slightly, by making it a 3 buckle with oversized cuff buckle, it allows quick easy buckling & a great snug fit. Features & ? Benefits Auto Ski Walk The boot still has Head’s “ Auto Ski Walk”, when out of the binding, the shaft of the boot is always unlocked allowing natural walking. As you step back in to the binding it automatically engages the ski mode & locks the cuff in position. This combined with the soft walk heel makes this boot great for walking in. Soft walk heel & grip system This boot has a softer material at the heel to give better traction & a grippy piece designed to give you more confidence when walking around resort on snow and  Ice. Both toe & heel sections on this boot can also be replaced should they wear out. 35mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all around close fit. It also helps to drive power to the edge of your skis giving a more positive and faster ski response. Bi-Injected Power Control Frame The Bi-Injected shell means that Head can use different density of shell materials to optimise foot wrapping, comfort & energy transmission. Heat Fit Liner This boot has Head’s Super Heat 3  liner, which is a high performance liner with self adapting padding in the ankle, heel & tongue. The liner is designed for maximum power transmission & comfort, it is also heat system ready.

Specification Last

Width: 106mm Instep: High Heel

Volume: High Toe

Volume: High Flex: 90 Shell

Material: PU/ Super Light Buckles: 2 Micro adjustable alloy & 1micro adjustable wide body alloy buckle Liner: Super Heat 3   The Cube³ has biggest volume of any of the boots that we sell, making it a great option for people with wider feet. This boot is very versatile on the mountain, with it’s sporty flex rating you can carve up the mountain all day in comfort. Is it for me? This boot is excellent for those who need all day comfort from a boot & need it to be super easy to get on & off. It can be quite a good choice if you don’t have much movement in your ankle which makes it difficult to get boots on or off as it opens nice & wide.









...

The Cube³ is a redesign of the I-Type, still with the same volume & foot print, but with a few tweaks & feature changes in order to keep the boot fresh. The boot still has the hybrid rear-entry system that means that you can tilt the cuff back & step in easily. What they have done is changed the buckle layout slightly, by making it a 3 buckle with oversized cuff buckle, it allows quick easy buckling & a great snug fit. Features & ? Benefits Auto Ski Walk The boot still has Head’s “ Auto Ski Walk”, when out of the binding, the shaft of the boot is always unlocked allowing natural walking. As you step back in to the binding it automatically engages the ski mode & locks the cuff in position. This combined with the soft walk heel makes this boot great for walking in. Soft walk heel & grip system This boot has a softer material at the heel to give better traction & a grippy piece designed to give you more confidence when walking around resort on snow and  Ice. Both toe & heel sections on this boot can also be replaced should they wear out. 35mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all around close fit. It also helps to drive power to the edge of your skis giving a more positive and faster ski response. Bi-Injected Power Control Frame The Bi-Injected shell means that Head can use different density of shell materials to optimise foot wrapping, comfort & energy transmission.

Specification Last
Width: 106mm Instep:  High Heel
Volume:  High Toe
Volume:  High Flex: 70 Shell
Material: PU/ Super Light Buckles: 2 Micro adjustable alloy & 1micro adjustable wide body alloy buckle   The Cube³ has biggest volume of any of the boots that we sell, making it a great option for people with wider feet. This boot is very versatile on the mountain, with it’s sporty flex rating you can carve up the mountain all day in comfort. Is it for me? This boot is excellent for those who need all day comfort from a boot & need it to be super easy to get on & off. It can be quite a good choice if you don’t have much movement in your ankle which makes it difficult to get boots on or off as it opens nice & wide.





...

The Cube³ is a redesign of the I-Type, still with the same volume & foot print, but with a few tweaks & feature changes in order to keep the boot fresh. The boot still has the hybrid rear-entry system that means that you can tilt the cuff back & step in easily. What they have done is changed the buckle layout slightly, by making it a 3 buckle with oversized cuff buckle, it allows quick easy buckling & a great snug fit. Features & benefits Auto Ski Walk The boot still has Head’s “ Auto Ski Walk”, when out of the binding, the shaft of the boot is always unlocked allowing natural walking. As you step back in to the binding it automatically engages the ski mode & locks the cuff in position. This combined with the soft walk heel makes this boot great for walking in. Soft walk heel & grip system This boot has a softer material at the heel to give better traction & a grippy piece designed to give you more confidence when walking around resort on snow and  Ice. Both toe & heel sections on this boot can also be replaced should they wear out. 35mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. Bi-Injected Power Control Frame The Bi-Injected shell means that Head can use different density of shell materials to optimise foot wrapping, comfort & energy transmission. Heat Fit liner This boot has Head’s “ Heat Fit liner”, which is a high performance liner with self adapting padding in the ankle, heel & tongue. The liner is designed for maximum power transmission & comfort, it has a Fur lining with Thermaluxe tips it is also heat system ready.

Specification Last

Width: 106mm Instep: high Heel

Volume: high Toe

Volume: high Flex: 80 Shell

Material: Super Light Buckles: 2 Micro adjustable alloy & 1micro adjustable wide body alloy buckle Liner: Heat Fit The Cube³ has biggest volume of any of the boots that we sell, making it a great option for people with wider feet. This boot is very versatile on the mountain, with it’s sporty flex rating you can carve up the mountain all day in comfort. Is it for me? This boot is excellent for those who need all day comfort from a boot & need it to be super easy to get on & off. It can be quite a good choice if you don’t have much movement in your ankle as it opens nice & wide.









...

The Cube³ is a redesign of the I-Type, still with the same volume & foot print, but with a few tweaks & feature changes in order to keep the boot fresh. The boot still has the hybrid rear-entry system that means that you can tilt the cuff back & step in easily. What they have done is changed the buckle layout slightly, by making it a 3 buckle with oversized cuff buckle, it allows quick easy buckling & a great snug fit. Features & benefits Auto Ski Walk The boot still has Head’s “ Auto Ski Walk”, when out of the binding, the shaft of the boot is always unlocked allowing natural walking. As you step back in to the binding it automatically engages the ski mode & locks the cuff in position. This combined with the soft walk heel makes this boot great for walking in. Soft walk heel & grip system This boot has a softer material at the heel to give better traction & a grippy piece designed to give you more confidence when walking around resort on snow and  Ice. Both toe & heel sections on this boot can also be replaced should they wear out. 35mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. Bi-Injected Power Control Frame The Bi-Injected shell means that Head can use different density of shell materials to optimise foot wrapping, comfort & energy transmission. Women’s  Heat Fit liner This boot has Head’s “ Women’s  Heat Fit liner”, which is a high performance liner with self adapting padding in the ankle, heel & tongue. The liner is designed for maximum power transmission & comfort, it has a Fur lining with Thermaluxe tips it is also heat system ready.

Specification Last

Width: 106mm Instep: high Heel

Volume: high Toe

Volume: high Flex: 80 Shell

Material: PU/ Super Light Buckles: 2 Micro adjustable alloy & 1micro adjustable wide body alloy buckle Liner: Heat Fit The Cube³ has biggest volume of any of the boots that we sell, making it a great option for people with wider feet. This boot is very versatile on the mountain, with it’s sporty flex rating you can carve up the mountain all day in comfort. Is it for me? This boot is excellent for those who need all day comfort from a boot & need it to be super easy to get on & off. It can be quite a good choice if you don’t have much movement in your ankle which makes it difficult to get boots on or off as it opens nice & wide.









...

The Cube³ is a redesign of the I-Type, still with the same volume & foot print, but with a few tweaks & feature changes in order to keep the boot fresh. The boot still has the hybrid rear-entry system that means that you can tilt the cuff back & step in easily. What they have done is changed the buckle layout slightly, by making it a 3 buckle with oversized cuff buckle, it allows quick easy buckling & a great snug fit. Features & benefits Auto Ski Walk The boot still has Head’s “ Auto Ski Walk”, when out of the binding, the shaft of the boot is always unlocked allowing natural walking. As you step back in to the binding it automatically engages the ski mode & locks the cuff in position. This combined with the soft walk heel makes this boot great for walking in. Soft walk heel & grip system This boot has a softer material at the heel to give better traction & a grippy piece designed to give you more confidence when walking around resort on snow and  Ice. Both toe & heel sections on this boot can also be replaced should they wear out. 35mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. Bi-Injected Power Control Frame The Bi-Injected shell means that Head can use different density of shell materials to optimise foot wrapping, comfort & energy transmission. Heat Fit Liner This boot has Head’s Heat Fit liner, which is a high performance liner with self adapting padding in the ankle, heel & tongue. The liner is designed for maximum power transmission & comfort, it is also heat system ready.

Specification Last

Width: 106mm Instep: high Heel

Volume: high Toe

Volume: high Flex: 90 Shell

Material: PU/ Super Light Buckles: 2 Micro adjustable alloy & 1micro adjustable wide body alloy buckle Liner: Heatfit The Cube³ has biggest volume of any of the boots that we sell, making it a great option for people with wider feet. This boot is very versatile on the mountain, with it’s sporty flex rating you can carve up the mountain all day in comfort. Is it for me? This boot is excellent for those who need all day comfort from a boot & need it to be super easy to get on & off. It can be quite a good choice if you don’t have much movement in your ankle which makes it difficult to get boots on or off as it opens nice & wide.









...

The Cube³ is a redesign of the I-Type, still with the same volume & foot print, but with a few tweaks & feature changes in order to keep the boot fresh. The boot still has the hybrid rear-entry system that means that you can tilt the cuff back & step in easily. What they have done is changed the buckle layout slightly, by making it a 3 buckle with oversized cuff buckle, it allows quick easy buckling & a great snug fit. Features & benefits Auto Ski Walk The boot still has Head’s “ Auto Ski Walk”, when out of the binding, the shaft of the boot is always unlocked allowing natural walking. As you step back in to the binding it automatically engages the ski mode & locks the cuff in position. This combined with the soft walk heel makes this boot great for walking in. Soft walk heel & grip system This boot has a softer material at the heel to give better traction & a grippy piece designed to give you more confidence when walking around resort on snow and  Ice. Both toe & heel sections on this boot can also be replaced should they wear out. 35mm Power Strap The power strap is there to give you a better fit & feel from the cuff of the boot & an all around close fit. It also helps to drive power to the edge of your skis giving a more positive & faster ski response. Bi-Injected Power Control Frame The Bi-Injected shell means that Head can use different density of shell materials to optimise foot wrapping, comfort & energy transmission. Super Heat 3 Liner This boot has Head’s “ Super Heat 3 Quick entry liner”, which is a high performance liner with self adapting padding in the ankle, heel & tongue. The liner is designed for maximum power transmission & comfort.

Specification Last

Width: 106mm Instep: high Heel

Volume: high Toe

Volume: high Flex: 80 Shell

Material: PU/ Super Light Buckles: 2 Micro adjustable alloy & 1micro adjustable wide body alloy buckle Liner: Super Heat 3 Quick The Cube³ has biggest volume of any of the boots that we sell, making it a great option for people with wider feet. This boot is very versatile on the mountain, with it’s sporty flex rating you can carve up the mountain all day in comfort. Is it for me? This boot is excellent for those who need all day comfort from a boot & need it to be super easy to get on & off. It can be quite a good choice if you don’t have much movement in your ankle which makes it difficult to get boots on or off as it opens nice & wide.









...