A stunning two-piece telescopic ski pole with the unique positive-locking Safety Snap system made from carbon lower & alloy/ti ...

A tube of genuine  Dynafit/ Rottafella  Binding Grease, this comes in a workshop size 200 gram tube & will last for years, & can be used on most ski bindings on metal & plastic surfaces.

Specification Service Temperature Range: -40 to +130 °C / Worked Penetration: 2mm/10 Base Oil Viscosity at 40°C: 32mm/s / NLGI  Class: 265-295 Four Ball Tester Drop Point: 190 °C / Four Ball Tester Weld Load: 1300 N Contains 200 grams of grease is a screw top flexible plastic tube

...

Dont loose your skis in deep powder thanks to this pair of 150cm powder tracers. These tracers tucks up inside your trousers & deploy when you need them. Just clip them onto your binding toes. Supplied as a pair in a little storage pouch, in bright orange with the Dynafit logo.   ...

The new RADICAL FT speaks loud & clear: it is the perfect solution for ski mountaineers & freeriders who love descents. All the advantages are crystal clear: any other systems pales in comparison in terms of weight & performance. The carbon plate stiffens by shifting the shock absorber forward into LOCK. In this position the rear rubber pieces work as dam- peners, & the ski stiffens up. Also, this increases torsional rigidity between the carbon plate & binding front piece. The ski will have its natural flex characteristics in the UNLOCK position. FEATURES & BENEFITS high connection plate in pressed carbon for maximum torsional rigidity Shock Absorber system to dampen buzz Extremely hard wearing toe-piece Maximum width (75 mm) for broad-shovel skis Side Towers for quick binding entry & greater side impact resistance Optimised Locking Lever Adjustable length +/- 12.5 mm Brake with gliding plate for excellent side release New Torx screws for tamper free secure fitting Jig/template optimised at the toe (just 4 screws instead of 5)

Specification Weight (g): 599 Colours: black DIN Range: 5+ Field of use:  Freeride Touring

Materials: 7075 forged aluminum, Cr Mo steel, high-strength plastic, stainless steel, Hexcel carbon  



...

The new RADICAL FT speaks loud & clear: it is the perfect solution for ski mountaineers & freeriders who love descents. All the advantages are crystal clear: any other systems pales in comparison in terms of weight & performance. The carbon plate stiffens by shifting the shock absorber forward into LOCK. In this position the rear rubber pieces work as dam- peners, & the ski stiffens up. Also, this increases torsional rigidity between the carbon plate & binding front piece. The ski will have its natural flex characteristics in the UNLOCK position. FEATURES & BENEFITS high connection plate in pressed carbon for maximum torsional rigidity Shock Absorber system to dampen buzz Extremely hard wearing toe-piece Maximum width (75 mm) for broad-shovel skis Side Towers for quick binding entry & greater side impact resistance Optimised Locking Lever Adjustable length +/- 12.5 mm Brake with gliding plate for excellent side release New Torx screws for tamper free secure fitting Jig/template optimised at the toe (just 4 screws instead of 5)

Specification Weight (g): 599 Colours: black DIN Range: 5+ Field of use:  Freeride Touring

Materials: 7075 forged aluminum, Cr Mo steel, high-strength plastic, stainless steel, Hexcel carbon  



...

The RADICAL ST is a step up from the Vertical ST because it is so easy to use & it makes the frameless system accessible to all skiing fans. With the Radical ST, there’s little place for systems with frames. FEATURES & BENEFITS An additional 6 mm plate at the front for a secure platform  Speed Step climbing bar ensures a solid platform when in climbing mode Side Towers for quick binding entry with QSI-Inserts & greater side impact resistance Optimised eccentric cam for spreading of loads Adjustable length +/- 12.5 mm for fine tuning of the boot sole length fitting Stopper on the gliding plate for excellent side release Torx screws for a secure & tamper-free fit  The jig/template optimized at the toe (just 4 screws instead of 5) for lighter weight with no loss of strength Brakes: 110mm Brake Included
- Wide range of additional widths available

Specification Weight (g): 531 Colours: black DIN Range: 4+ Field of use:  Freeride Touring , Ski Touring

Materials: 7075 forged aluminum, Cr Mo steel, high-strength plastic, stainless steel  




...

The RADICAL ST is a step up from the Vertical ST because it is so easy to use & it makes the frameless system accessible to all skiing fans. With the Radical ST, there’s little place for systems with frames. This is the 100mm brake width option, ideal for skis with waists of up to around 95mm FEATURES & BENEFITS An additional 6 mm plate at the front for a secure platform  Speed Step climbing bar ensures a solid platform when in climbing mode Side Towers for quick binding entry with QSI-Inserts & greater side impact resistance Optimised eccentric cam for spreading of loads Adjustable length +/- 12.5 mm for fine tuning of the boot sole length fitting Stopper on the gliding plate for excellent side release Torx screws for a secure & tamper-free fit  The jig/template optimized at the toe (just 4 screws instead of 5) for lighter weight with no loss of strength Brakes: 110mm Brake Included
- Wide range of additional widths available

Specification Weight (g): 531 Colours: black DIN Range: 4+ Field of use:  Freeride Touring , Ski Touring

Materials: 7075 forged aluminum, Cr Mo steel, high-strength plastic, stainless steel  




...

The RADICAL ST is a step up from the Vertical ST because it is so easy to use & it makes the frameless system accessible to all skiing fans. With the Radical ST, there’s little place for systems with frames. This is the 130mm brake width option, ideal for skis with waists of up to around 125mm FEATURES & BENEFITS An additional 6 mm plate at the front for a secure platform  Speed Step climbing bar ensures a solid platform when in climbing mode Side Towers for quick binding entry with QSI-Inserts & greater side impact resistance Optimised eccentric cam for spreading of loads Adjustable length +/- 12.5 mm for fine tuning of the boot sole length fitting Stopper on the gliding plate for excellent side release Torx screws for a secure & tamper-free fit  The jig/template optimized at the toe (just 4 screws instead of 5) for lighter weight with no loss of strength Brakes: 110mm Brake Included
- Wide range of additional widths available

Specification Weight (g): 531 Colours: black DIN Range: 4+ Field of use:  Freeride Touring , Ski Touring

Materials: 7075 forged aluminum, Cr Mo steel, high-strength plastic, stainless steel  




...