United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Data Sunfire High Performance Fluoro Ski And Snowboard Wax 1KG Pack
Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier and manufacturer of snow sport waxes in Britain. Its success is based on value for money. Sunfire is part of the new Datawax high performance grade range of waxes that are perfect for racing or the park (or just maximum enjoyment). With its higher fluoro content Sunfire gives great acceleration and long lasting glide in wet or granulated snow conditions. Avoid those awkward losses of speed on wet snow! On harder, granulated snow mix with Magma. Fantastic as an after lunch rub on tune up to help you glide through the late afternoon slush. Perfect wax when the snow temperature is at or above 0°C. Item Specification Best Snow Temperature: 0oC and
above Iron-on Temperature: 100oC Colour: Yellow Weight: 1kg Bulk Pack = 24 Sticks Iron on Wax Instructions 1) Set the iron to the correct temperature for the wax you have chosen. 2) Gently press your chosen wax against the hot waxing iron. 3) Keep the iron 4 inches above the base then move the iron with the wax dripping from it the full length from tip to tail. 4) Ensure the iron doesn’t smoke as this means it is too hot and you are burning the wax. 5) Gently place the iron onto the tip and using long smooth strokes from tip to tail iron the wax into the base. 6) IMPORTANT! Make sure that you always keep the iron moving (this prevents the base from melting and the ski/board being unusable). 7) Use long, smooth and slow passes along the base without any downward pressure until you
have a smooth, thin layer of wax across the whole surface of the base. 8) Finish with one long pass along the full length of the base with the iron (to make scraping easier) 9) Leave the base to cool for 15 minutes minimum, 45 minutes if possible. Rub On Wax Instructions 1) Place the longest side of the wax block against the base at the tip. 2) Hold firmly and using the edge of the block rub from tip to tail in smooth, long strokes. 3) Cover the full width and length of the base with a thin, even application.
above Iron-on Temperature: 100oC Colour: Yellow Weight: 1kg Bulk Pack = 24 Sticks Iron on Wax Instructions 1) Set the iron to the correct temperature for the wax you have chosen. 2) Gently press your chosen wax against the hot waxing iron. 3) Keep the iron 4 inches above the base then move the iron with the wax dripping from it the full length from tip to tail. 4) Ensure the iron doesn’t smoke as this means it is too hot and you are burning the wax. 5) Gently place the iron onto the tip and using long smooth strokes from tip to tail iron the wax into the base. 6) IMPORTANT! Make sure that you always keep the iron moving (this prevents the base from melting and the ski/board being unusable). 7) Use long, smooth and slow passes along the base without any downward pressure until you
have a smooth, thin layer of wax across the whole surface of the base. 8) Finish with one long pass along the full length of the base with the iron (to make scraping easier) 9) Leave the base to cool for 15 minutes minimum, 45 minutes if possible. Rub On Wax Instructions 1) Place the longest side of the wax block against the base at the tip. 2) Hold firmly and using the edge of the block rub from tip to tail in smooth, long strokes. 3) Cover the full width and length of the base with a thin, even application.
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark