Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier & manufacturer of snow sport waxes in Britain. Its success is based on value for your money. It is essential to wax onto a base that is clean from grease, dirt & old wax, otherwise your new wax will not penetrate the base.  Use this citrus based, environmentally friendly product as a vital part of your ski preparation.  As a bonus it is fantastic for cleaning top sheets too! How To Use? 1) Spray a generous amount of the base cleaner onto the base. 2) Wipe it across the entire base with a paper towel to ensure complete coverage. 3) Leave the liquid on the base for only a few seconds. 4) Use a fresh paper towel to polish the base & remove all remaining base cleaner. 5) Inspect the amount of dirt that has been removed. 6) Prepare to be surprised at the colour of the towel!     Contents: 500 ml Our Opinion Wax cleaner is an essential part of the DIY tuning kit for skiers & snowboarders. ...

Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier & manufacturer of snow sport waxes in Britain. Its success is based on value for your money. Use this scraper for scraping your skis after waxing.  An easy job which makes the wax last longer & the skis run more smoothly.  The acrylic scraper can be resharpened using a flat file. How To Use 1) Hold the scraper with both hands with your index fingers looped over the top outside edge & your thumbs in the middle. 2) Try to apply even pressure across the whole scraper so that it scrapes the full width of the scraper on each pass. 3) Use long smooth strokes, tip to tail, until you can’t take any more wax off the base.   ...

Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier & manufacturer of snow sport waxes in Britain. Its success is based on value for your money. Use this scraper for scraping your board after waxing.  An easy job which makes the wax last longer & the board run more smoothly.  The acrylic scraper can be resharpened using a flat file. How To Use 1) Hold the scraper with both hands with your index fingers looped over the top outside edge & your thumbs in the middle. 2) Try to apply even pressure across the whole scraper so that it scrapes the full width of the scraper on each pass. 3) Use long smooth strokes, tip to tail, until you can’t take any more wax off the base.   ...

Occasionally you need a wax free from fluoro carbons such as when the snow is very dry.  Data Wax  Butane HC is designed for hard pack, glacier conditions, man-made snow or ice. This was is ideal for indoor slope skiing as it is more resistant to the harsher man-made snow crystals. This is the hardest of Datas snow waxes, giving lasting protection & high speed glide. FEATURES • Perfect in snow at-6°C to -16°C • Butane is a performance grade iron on wax for cold temperature conditions • Iron on Temperature 120°C   ...

Butane is part of the new Data Wax high performance grade range of waxes that are perfect for racing or the park (or just maximum enjoyment). Butane is designed for hardpack or ice, giving lasting protection & high speed glide. A perfect slalom wax. Butane has extra fluoro & is also the perfect wax for artificial snow whether on piste or indoors. It is hard enough to resist snow burn & yet gives fantastic acceleration & durability. Item

Specification Best Snow Temperature: -6o C to -16oC Iron-on Temperature: 120oC

Colour: Blue Weight: 110g Block Iron on Wax Instructions 1) Set the iron to the correct temperature for the wax you have chosen. 2) Gently press your chosen wax against the hot waxing iron. 3) Keep the iron 4 inches above the base then move the iron with the wax dripping from it the full length from tip to tail. 4) Ensure the iron doesn’t smoke as this means it is too hot & you are burning the wax. 5) Gently place the iron onto the tip & using long smooth strokes from tip to tail iron the wax into the base. 6) IMPORTANT! Make sure that you always keep the iron moving (this prevents the base from melting & the ski/board being unusable). 7) Use long, smooth & slow passes along the base without any downward pressure until  you have a smooth, thin layer of wax across the whole surface of the base. 8) Finish with one long pass along the full length of the base with the iron (to make scraping easier) 9) Leave the base to cool for 15 minutes minimum, 45 minutes if possible.



...

Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier & manufacturer of snow sport waxes in Britain. Its success is based on value for your money. This is a replacement file for the Data Get-A-Grip File Guide. We recommend you replace these files at least every year.    ...

Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier & manufacturer of snow sport waxes in Britain. Its success is based on value for your money. A Data Wax Get-a-Grip is an easy to use, affordable edging tool that is very portable so you can sharpen your edges in just a few minutes. This tool has the option of either 88° or 90° angles so that you can tune your edges for exactly what you need. Comes boxed with instructions & a 5 inch file. How To Use 1) Select the edge angle you require. 2) Orientate the Get-a-Grip with the number matching your selected angle nearest to your ski or board. 3) Hold the Get-a-Grip firmly in your dominant h&. 4) Place the guide on the edge with the plastic flush against the base. 5) Ensure the file is facing the edge so that it cuts. 6) Pull the guide towards you, running in long smooth strokes, keeping the pressure even & the plastic guide flat against the base. 7) Repeat until the edge is sharp along the whole length of the ski or board. ...

This wax is an excellent balance of high speed & great glide. It is ideal for summer training on glaciers or later season performance. Supplied as a 110 Gram block. A very exciting new addition to the 2013/14 Data Wax range. Packaged in our new 110g plastic clamshell for easy access & safe storage.   ...

The hardest of the Graphite waxes, making it the ideal race wax for indoor snow surfaces. This wax has great protective qualities but, more importantly is fast & hard enough to resist the abrasive nature of the snow crystals inside the snow dome. Packaged in our new 110g plastic clamshell for easy access & safe storage.   ...

This wax is a great performance wax for end of season “spring” skiing or boarding. Added graphite gives the static electricity repellence when the snow is older or dirty. 110  Grams. Provides great speed andglide over the higher water content snow conditions found at this time of the year. Packaged in Datas new 110g plastic clamshell for easy access & safe storage.   ...