The Defenders of Awesome has quickly become one of the favourites in the Capita line up. Now with a wax infused sintered base & two carbon fibre beams the true twin DOA is a freestyle board that can handle high speeds & big booters. Specification: Profile: Hybrid FK (Reverse, zero, positive, zero, reverse) Running length: 1240 Waist

Width: 25.20 Sidecut radius: 8.00 Setback: Centred Flex (1 soft, 10 stiff): 5.5 (Specification based on the 156cm board) Note: Base graphic colours may vary

Features: The Hybrid FK profile uses reverse, zero & positive camber in a true twin shape. There is positive camber in the middle (starting 5cm outside the inserts), zero camber outside of this & a small reverse camber section at the contact points. Utilising all these profiles in this way provides the pop & stability of a camber profile with the forgiveness & easy turn initiation of reverse camber. Flat Kick is the shape given to the profile of the nose & tail. Most boards have a gradual curve from the contact points to the tip/tail. Capita found that while that works well with a traditional camber profile, it does not work so well with the raised contact points of a reverse camber profile. Flat Kick essentially adds responsiveness & speed to edge-to-edge turning. Made with a single species of poplar grain the RFC Sustainable Core extends from edge to edge & tip to tail. The wood grain has no knots or finger joints either which helps ensure a completely uniform flex pattern throughout the board. In addition they have been re-forestation certified offering a sustainable alternative without sacrificing on performance. Running through the board from just before the nose to just before the tail are 2x 30mm Carbon Fibre Beams. Known for its rigidity & low weight, carbon adds power & response whilst remaining ultra light. Special Blend EVO Tech Fibreglass Configuration is a more environmentally friendly manufacturing process that requires less energy consumption & yields higher technical properties. Sintered bases absorb the highest amount of wax which provides extended periods of high speed riding. The Wax Infused Rotation Sintered Speed Base is used on the top end of the Capita range ensuring you go faster for longer. Freestyle boards that have a camber hybrid profile & a mid flex are just as suited to cruising the resort, holding an edge on steep & hard slopes as they are to pressing out slides on rails, so you don’t have to be the next Dan Brisse to ride one. I’m a big fan of boards with camber underfoot because it makes the board so much livelier. The DOA with its relatively low camber & flat (zero camber) sections outside of it is incredibly forgiving, but it’s still quick when you want to set an edge & nice & stable throughout the turn. This board won’t fail to put a smile on your face. Is it for me? It’s suited to so many riders that the answer is probably yes. Whether you are a one week a year with the lads’ type of snowboarder, a devoted park rider, an intermediate to expert all-mountain kind of guy or are looking for a first board that you won’t grow out of then yeah, it’s the one.



...

The Defenders of Awesome has quickly become one of the favourites in the Capita line up. With a wax infused sintered base & two carbon fibre beams the true-twin DOA is a freestyle board that can handle high speeds, big booters & resort slaying. Specification: Profile: Hybrid FK Setback: 0 Flex: Medium Length CM Effective Edge MM Waist Width MM Rider Weightkg 152 1208 248 50-73 154 1224 250 52-77 156 1240 252 57-80 158 1256 254 59-84 NOTE: DIE CUT BASE COLOUR COMBINATIONS ARE RANDOM 

Features: The Hybrid FK Profile uses reverse, zero & positive camber in a true twin shape. There is positive camber in the middle (starting 5cm outside the inserts), zero camber outside of this & a small reverse camber section at the contact points. Utilising all these profiles in this way provides the pop & stability of a camber profile with the forgiveness & easy turn initiation of reverse camber. Flat Kick is the shape given to the profile of the nose & tail. Most boards have a gradual curve from the contact points to the tip/tail. Capita found that while that works well with a traditional camber profile, it does not work so well with the raised contact points of a reverse camber profile. Flat Kick essentially adds responsiveness & speed to edge-to-edge turning. Made with a single species of poplar grain the RFC Sustainable Core extends from edge to edge & tip t

...

The quintessential urban park board has been seriously upgraded this season. The all new blunted shape features a shorter nose & tail for decreased swing weight, allowing you to down size without losing performance. The new core & fibreglass construction makes the Horrorscope lighter, stronger & more awesome than ever. Specification: Profile: Urban FK Setback: 0 Flex: Soft Length CM Effective Edge MM Waist Width MM Rider Weightkg 147 1129  248 41-68 151 1161  252 45-75 153 1177 254 55-77 155 1193 256 59-82 157 1209 258 66-89 NOTE: BASE & TOP SHEET GRAPHICS ARE SIZE SPECIFIC  

Features: Flat between the binding inserts & reverse camber from the inserts to the tips, the Urban FK Profile is for pure jib & park machines. Whether you’re in the street or at the resort, it’s perfectly proportioned for pressing without fear of hooking up. Flat Kick is the shape given to the profile of the nose & tail. Most boards have a gradual curve from the contact p

...

Are all these rocker, reverse, zero camber profiles getting confusing? Wouldn’t it be refreshing is someone just made a Normal Ass Snowboard? Well the NAS is exactly that. With camber findings its way back into most snowboard ranges in one form or another it’s refreshing to be able to buy a new board that offers all of the benefits of simple, traditional camber. Unmatched power, stability & pop Specification: Profile: Traditional camber Running length: 1245 Waist

Width: 24.90 Sidecut radius: 8.50 – 7.90 Setback: 0.5 inches Flex (1 soft, 10 stiff): 7 (Specification based on the 159cm board)

Features: Traditional Camber provides the ultimate in pop & high speed stability. This tried & tested profile increases the amount of the snowboards edge that is in contact with the snow & provides more power through to your nose & tail. Made with a single species of poplar grain the RFC Sustainable Core extends from edge to edge & tip to tail. The wood grain has no knots or finger joints either which helps ensure a completely uniform flex pattern throughout the board. In addition they have been re-forestation certified offering a sustainable alternative without sacrificing on performance. Kevlar is one of the strongest & most durable materials available & carbon remains one of the most responsive & lightweight. The combined use of Kevlar & carbon in the 2x 20mm Carbon + Kevlar Beams that run from just before the nose to just before the tail provides the optimum in performance & reliability. Special Blend EVO Tech Fibreglass Configuration is a more environmentally friendly manufacturing process that requires less energy consumption & yields higher technical properties. To improve durability in key break zones Black Fleece is used. This black glass increases strength & reduces the chance of board failure. Sintered bases absorb the highest amount of wax which provides extended periods of high speed riding. The Wax Infused Rotation Sintered Speed Base is used on the top end of the Capita range ensuring you go faster for longer.   Like lots of people, I learnt to snowboard on a camber snowboard. I appreciate all of the new profiles that are now on the market but I will always have a camber board in my collection. There is nothing more suitable for super quick edge changes & sold carved turns on corduroy piste. That’s the reason the NAS was one of the first boards on our order form. Is it for me? It’s ideal if you feel a little unsatisfied after switching to a rocker or hybrid profile & want it to be the way it used to be. Also a great choice if you are looking for a board that provides excellent edge hold & is capable of out & out charging.



...

This durable & responsive true twin freestyle board has become increasingly popular with the Capita team riders. The new XXX (truded) base is harder & therefore more resilient than standard extruded bases & the zero camber profile makes it easy to ride whilst remaining poppy & dependable. Specification: Profile: Zero camber Running length: 1166 Waist

Width: 25.00 Sidecut radius: 8.00 Setback: Centred Flex (1 soft, 10 stiff): 5 (Specification based on the 156cm board)

Features: Zero Camber is flat from contact point to contact point. The result is a longer effective edge than that of a rocker profile but with a looser feel than you get from camber. Vertically laminated strips of poplar wood make up the SS Select Core. There are no irregularities in the grain or finger joints which allows for a consistent & uniform flex throughout the board. Kevlar is one of the strongest & most durable materials available & carbon remains one of the most responsive & lightweight. The combined use of Kevlar & carbon in the 2x 20mm Carbon + Kevlar X which is positioned in the middle of the board in an X shape improves underfoot stability whilst allowing for a forgiving flex in the nose & tail. To improve durability in key break zones Black Fleece is used. This black glass increases strength & reduces the chance of board failure. Extruded bases are both durable & easy to maintain which is ideal if you aren’t one for waxing your board regularly. The XXX (truded) Base is subjected to higher temperatures & more pressure during manufacture than regular extruded bases which further increases the surface hardness.   I think it’s impossible not to have a good time riding this board. Come to think of it I haven’t ridden a zero camber board that I didn’t like. What I like about boards like the Outdoor Living is that the entire edge & contacts points are ready to engage the moment you want them to but are super forgiving if you get your balance wrong on landing or mid butter. Is it for me? Not only is it ideal for the park rats out there who want to slide, bonk, jump & spin everything that stands in their way, but the Outdoor Living would make an ideal board for the improving snowboarder that wants a confidence inspiring board that turns easily at slow speeds & is virtually catch free.



...

Loose fitted cargo pant Colour Wear (or CLWR) is a Swedish lifestyle brand characterized by a playful yet functional approach. Influenced by the streets & developed & formed into technical garments. Street elements are crossed with function to create a raw & rider tailored line of clothing. CLWR brings street style & attitude to the mountain & the demands & functionality of the mountains to the streets.  

Specification -       DWR treated nylon oxford -       Water proof/ Breathability: 10 000mm/10 000 g/m 2/24h FEATURES -       Taped seams -       Ventilation at inseam -       Velcro adjustable waist straps -       Back belt loops to attach jacket snow skirt -       Large bellow pockets with button closure at side of leg -       Back pockets with buttons closure -       Articulated knees -       Snow gaiters with silicon gripper & hook -       Reinforced bottom leg end -       Side zipper with gusset at leg end

...

Classic beanie with large pom Colour Wear (or CLWR) is a Swedish lifestyle brand characterized by a playful yet functional approach. Influenced by the streets & developed & formed into technical garments. Street elements are crossed with function to create a raw & rider tailored line of clothing. CLWR brings street style & attitude to the mountain & the demands & functionality of the mountains to the streets.

Specification -       Acrylic FEATURES -       Large pom -       Jaquard knit CLWR logotype -       Small CLWR logotype patch at fold up

...