A key feature of the Next is the Shape. This is slightly tapered so the nose is a little wider than the tail, as well as being longer. This enables the tail to sink slightly more, which in turn lifts the nose. Traditional Camber & performance enhancing materials make this a dependable, yet charge-able, backcountry weapon. Specification: Profile: Traditional Camber Running length: 1171 Waist

Width: 248 Sidecut radius: 8300 Setback: Centred Flex: 8 (Specification based on the 159cm board)

Features: Tried & tested, with a rise between the contact points, Traditional Camber provides true performance. Edge hold & pop is generated by the boards shape fighting against the force provided by the rider. Both lively & responsive, there is a reason that traditional camber lives on. The narrower tail is designed to sink in order to raise the nose when riding in deep power. The Tapered Directional Shape also has a longer nose than tail to further improve float, which results in effortless turns in soft snow. This shape also works on the groomers by allowing for dynamic turns, especially at speed. A Carbon Beam runs the entire length of the board with two additional beams extending from the back of the rear binding inserts out to just past the edge contact points at the tail. Try to imagine the peace symbol with the board upright. These added beams in the tail provide definitive pop from the tail & the ability to power out of turns, whilst not adding any additional weight. The Phantom Core is 15% lighter than the Standard Woodcore making the board feel much lighter under foot. For increased edge grip & stability at speed a Triax fibreglass laminate is used. The extra cross laminate stiffens the torsional flex of the board. With high wax absorption the Sintered 7500 base permits high-speed riding. Not only does it look amazing but the Bamboo Wood Veneer also adds strength & enhances the boards flex. Multi layer Dampening makes the board more stable by reducing high-frequency vibrations that cause the board to chatter on hard snow. Found on every single Endeavour snowboard is a Negative Core Profile. Slightly profiled between your feet, this feature reduces weight & allows the board to flex more naturally & freely. The ABS sidewalls are stitched in place by what looks like fishing line. Stitched Sidewalls drastically increase the level of strength & durability.   Tapered, directional, & with a stiff flex, the Next is built to handle your ‘next’ big line. Sketchy couloirs, icy faces & deep-filled powder bowls. It’s certainly not one for beginners, but if you venture under the piste ropes or hike for your turns, then you will appreciate the performance that this high-end board provides. On a side note, the direct printed bamboo veneer topsheet looks amazing. Is it for me? If your riding has stepped up a notch & you’re increasingly looking for more challenging off piste terrain, or venturing into the backcountry, then it’s time to get a board that is designed for the job in h&, like the Next is. 



...

A key feature of the Next is its Shape. This is slightly tapered so the nose is a little wider than the tail, as well as being longer. This enables the tail to sink slightly more, which in turn lifts the nose. Reverse Camber for extra float, & performance enhancing materials make this a dependable, backcountry, powder weapon. Specification: Profile: Traditional Camber Running length: 1171mm Waist

Width: 248mm Sidecut radius: 8300 Setback: Centred Flex: 8 (Specification based on the 159cm board)

Features: Reverse Camber between the bindings & flat zones outside of them in order to take the pressure off the contact points. Boards with this profile feel looser, float incredibly well in powder & are fun to ride. The narrower tail is designed to sink in order to raise the nose when riding in deep power. The Tapered Directional Shape also has a longer nose than tail to further improve float, which results in effortless turns in soft snow. This shape also works on the groomers by allowing for dynamic turns, especially at speed. A Carbon Beam runs the entire length of the board with two additional beams extending from the back of the rear binding inserts out to just past the edge contact points at the tail. Try to imagine the peace symbol with the board upright. These added beams in the tail provide definitive pop from the tail & the ability to power out of turns, whilst not adding any additional weight. The Phantom Core is 15% lighter than the Standard Woodcore making the board feel much lighter under foot. For increased edge grip & stability at speed a Triax fibreglass laminate is used. The extra cross laminate stiffens the torsional flex of the board. With high wax absorption the Sintered 7500 base permits high-speed riding. Not only does it look amazing but the Bamboo Wood Veneer also adds strength & enhances the boards flex. Multi layer Dampening makes the board more stable by reducing high-frequency vibrations that cause the board to chatter on hard snow. Found on every single Endeavour snowboard is a Negative Core Profile. Slightly profiled between your feet, this feature reduces weight & allows the board to flex more naturally & freely. The ABS sidewalls are stitched in place by what looks like fishing line. Stitched Sidewalls drastically increase the level of strength & durability. Tapered, directional, & with a stiff flex, the Next is built to handle your ‘next’ big line. If you venture under the piste ropes or hike for your turns, then you will appreciate the performance that this high-end board provides. The reverse camber option provides even more float, so when conditions are good you will be on the best board for the job. On a side note, the direct printed bamboo veneer topsheet looks amazing. Is it for me? If your riding has stepped up a notch & you’re increasingly looking for more challenging off piste terrain, or venturing into the backcountry, then it’s time to get a board that is designed for the job in h&, like the Next is. 



...

Zero camber increases the surface area of the board that is in contact with the snow, over say, a rocker profile. The increase in base contact, even distribution of pressure & flat kicked nose & tail, means that the board performs like a longer board (is faster, long edge contact etc), but with the reduced weight & increased manoeuvrability of a shorter board. Specification: Profile: Zero Camber Running length: 1116mm Waist

Width: 253mm Sidecut radius: 7667 Setback: Centred Flex: 4 (Specification based on the 151cm board)

Features: Zero Camber is flat from the start of the nose through to the start of the tail. With combined DT2 shaping, the contact points are raised off the snow. DT2 has extra rise for an extended zone (compared with standard Dow Tech which is featured on some Endeavour boards) for an even looser & fun feel. The Flat Kicked Nose & Tail provides superior edge hold due to the quick radius from flat. This means you can drop in length & still have the same control. The Twin shape is completely symmetrical for switch riding with ease, whether you plan to ride the whole mountain or in the park. A Carbon Beam runs between the widest binding inserts to add memory & pop without adding any additional weight. The Mid Wide shape is a little more generous in the waist & underfoot which suits riders with (roughly) a UK10 boot by eliminating toe & heel drag without having to get a ‘wide’ board. Made from 100% Canadian Poplar wood, the full Poplar Core is lightweight & extremely durable. Both lightweight & durable, Biax Fiberglass provides a forgiving torsional flex which makes it absolutely ideal for park riders, jibbers & those looking for a mellow ride. The Extruded 1320 Base is easy to repair & requires very little maintenance. In order to prevent sidewall cracks, dampen vibrations & reduce fatigue, Rubber Inlays are built into the sidewalls. Having these inlays is particularly beneficial if you are going to be riding rails, but they are designed to prolong the life of your board even if you don’t. Found on every single Endeavour snowboard is a Negative Core Profile. Slightly profiled between your feet, this feature reduces weight & allows the board to flex more naturally & freely. The ABS sidewalls are stitched in place by what looks like fishing line. Stitched Sidewalls drastically increase the level of strength & durability. Thanks to the Rail Ready Detune
- an edge bevel that runs the full perimeter of the board, getting hooked on rails & boxes is a thing of the past. Riding a shorter board will help you to spin more easily because of the reduction in volume & weight. The New Standard allows you enjoy those benefits without suffering from the toe & heel drag that is usually suffered when downsizing on board length, thanks to the mid-wide shape. The waist width of the 145cm board is what you would expect from a board 10cm longer. Riding a short board is fun, & whilst not being ideal for powder days you’ll be having so much fun on the ‘bad weather’ days that it is more than justified as a board choice. Is it for me? If y




...

The Holmenkol Ergo Easy is a simple & easy to use side edge tool with file, to allow you to do 88 & 89 degree (i.e. 1 or 2 degree) side edge tuning. Supplied with an ICECUT file for setting ski & snowboard edges. The Holmenkol Ergo Easy is a simple & easy to use side edge tool with file, to allow you to do 88 & 89 degree (i.e. 1 or 2 degree) side edge tuning. It comes complete with an Ice Cut file for general side edge tuning. It is small enough to carry in your daypack & easy to grip thanks to the ergonomic file holder construction.

Material: Plastic construction with ergonomic grip Packaging:

Includes:: ICE CUT mini file Our Opinion A handy little tool if you dont need a variable angle side edge tool with a quality file as well. Is This For Me? Great for tuning up your edges on the slope or at home without fuss.



...

The Easton Artica Trail Woman Snowshoes  are ideal for the casual female hiker needing high quality & superior performance. From the Quick Cinch binding, to the Virtual Pivot & articulating frame, the Trail™ model has all the standard ARTICA™ performance features.

Specification & FEATURES Articulating Frame Twists to aborb torsion normally passed to the knees Virtual Pivot-Point Traction Cam Instantly adapts to slope gradient & snow conditions whilst reducing strain on the feet Quick-Cinch Binding Pull-&-go one hand entry for quick access, & adjustable heel cup Comfort Contour Pads      Padded side sections provide comfortable grip Aggressive Rear Traction      Additional heel crampon for increased traction in extreme conditions 80% Recyclable      Each recycleable part is coded, & upon return to Easton can be recycled to make future snow shoes & other products E3 Decking            For non-slip traction. Abrasion resistant for durability Stainless Steel Crampons      A pivoting toe claw crampon matches your stride & provides incredible traction 6063 Aluminium USA Frame Easton Aerospace Alloy for maximum strength & light weight  

...

The Easton Artica Trail Woman Snowshoes  are ideal for the casual female hiker needing high quality & superior performance. From the Quick Cinch binding, to the Virtual Pivot & articulating frame, the Trail™ model has all the standard ARTICA™ performance features.

Specification & FEATURES Articulating Frame Twists to aborb torsion normally passed to the knees Virtual Pivot-Point Traction Cam Instantly adapts to slope gradient & snow conditions whilst reducing strain on the feet Quick-Cinch Binding Pull-&-go one hand entry for quick access, & adjustable heel cup Comfort Contour Pads      Padded side sections provide comfortable grip Aggressive Rear Traction      Additional heel crampon for increased traction in extreme conditions 80% Recyclable      Each recycleable part is coded, & upon return to Easton can be recycled to make future snow shoes & other products E3 Decking            For non-slip traction. Abrasion resistant for durability Stainless Steel Crampons      A pivoting toe claw crampon matches your stride & provides incredible traction 6063 Aluminium USA Frame Easton Aerospace Alloy for maximum strength & light weight  

...

Our house beanie for the Edge & Wax ski staff & test team members is a great quality beanie that can be worn cuff style, slouch or classic. Made from quality nylon cross stitched for durability & warmth. A dual sided logo means that whatever way you wear the beanie, cuff or straight, the logo is the right way up.   One size fits all adults. Assembled right here in the UK. ...

A value for your money wax scraper for light duty use, complete with the Edge & Wax logo to remind you where to buy your next ...

Edge & Wax offer a range of gift vouchers, which can be spent in our showroom on any product or any of our services including boot fitting, footbeds & servicing tuitions. They can also be spent via our mail order department or online. We offer £10, £20 & £50 denominations. Treat someone special or just treat yourself! Comes complete with gift card with blank area for you to enter your message & envelope. There are a choice of two cards, either Blue Mountain or White Ice. Please enter your choice at the checkout. ...