Vision Techconnect TC2-10MHDMI is a High Quality Installation Grade 10 Meter HDMI V1.4 video cable with Audio & Ethernet supported & compact connectors. The Vision 10m HDMI V1.4 Video Cable is Compatible with: Projectors, Sky HD Receiver, Blu-ray Player & HD DVD Player to a HD Ready or Full HD Compliant TV or Projectors.
- HDMI Standard: V1.4
- Gauge: 28 AWG
- HDCP & HDTV Compatible
- 1080i / 1080P / 720p
- 3D Ready High-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled devices without a separate Ethernet cable. HDMI 1.4 connected to device with a built-in tuner will send audio data "upstream" to a surround audio system, eliminating the need for a separate audio cable. Techconnect Cables gives you the speed of a pre-terminated system with both ends of the TC2-10HDMI cable been pre-terminated with a male HDMI connector ready to plug into back of a Techconnect V2 Module & a Molded HDMI Plug on the other end for direct connection into your Projector, TV, Computer other HDMI compatible device.




...

Vision Tech connect TC2-15MHDMI is a High Quality Installation Grade 15 Meter HDMI V1.4 video cable with Audio & Ethernet supported & compact connectors. The Vision 15m HDMI V1.4 Video Cable is Compatible with: Projectors, Sky HD Receiver, Blu-ray Player & HD DVD Player to a HD Ready or Full HD Compliant TV or Projectors.
- HDMI Standard: V1.4
- Gauge: 28 AWG
- HDCP & HDTV Compatible
- 1080i / 1080P / 720p
- 3D Ready High-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled devices without a separate Ethernet cable. HDMI 1.4 connected to device with a built-in tuner will send audio data "upstream" to a surround audio system, eliminating the need for a separate audio cable. Techconnect Cables gives you the speed of a pre-terminated system with both ends of the TC2-15HDMI cable been pre-terminated with a male HDMI connector ready to plug into back of a Tech connect V2 Module & a Molded HDMI Plug on the other end for direct connection into your TV, Computer other HDMI compatible device.




...

When a projector is installed on the ceiling you need a way of plugging your laptop or other source equipment into it without having to clamber up on the table. The Techconnect modular faceplate system makes this simple allowing you to make the input connectors available on an easily accessible wall plate. ...

Vision is the only true complete solution supplier with products ranging from Plasma Display Screens & Data / Video projectors to universal brackets & a wide variety of accessories. Vision has an enviable reputation for being able to move quickly & produce products that the market demands. ...

The Techconnect range features an attractive architectural front surround system making it suitable for corporate & home-cinema applications, plus robust clip-in modules which make it super-quick to install & flexible. It allows seamless integration of connectivity, audio, & control. Plug-In Cables Modules feature plug-in connectors on the rear. Cables come pre-terminated with male connectors which are simply plugged into the rear of the module. Need to shorten or pull a cable? Just unscrew the captive-screw connector. Techconnect gives you the speed of a pre-terminated system with the flexibility you sometimes need. More Space By using multi-layer printed circuit boards we’ve created much more space behind each module for cables. The depth of the VGA module being just 38mm from the front of the module to the rear. Backboxes The Techconnect packages come with a surface-mounted ‘backbox’ & a ‘surround’ – the part the modules clip into. The range

Includes:: various flush & surface mounting backboxes, & all the surrounds conform to standard British sizes so they fit any locally sourced backboxes. Vision also offers Australian & American surrounds which conform to local standards. Backboxes are carefully designed with convenient easy-push-out sections for trunking & are made from flexible non-marking plastic so are not brittle like common backboxes. Quick & Easy Simple enough that even an inexperienced technician can install it. No soldering is necessary due to its captive screw connector design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want & swap it out. Plug-&-Play Connectivity Unlike cheap VGA cable, Vision’s quality cable has SDA & SCL data lines to support DDC2B (Display Data Channel) which allows the display device to communicate its supported display modes. Without these the user will not experience play-&-play connectivity & will have to manually setup resolution & color bit depth. Installation-Grade Cable When choosing cable don’t be fooled by a thick cable jacket. Does it have adequate copper? Is it shielded evenly to prevent ghosting? A major cost component of cables is copper, so cheap cables have less copper. Compromising can result in cable which doesn’t support high resolutions, & results in flagging or image jitter. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Plus Ferrite Cores included on VGA cables to eliminate radio-frequency induction noise.

...

The TM-CAGE is obvious enough to serve as an effective visual deterrent, but is unobtrusive. Just because it needs to be seen, doesn't mean it needs to be ugly! The enclosure assembles like a puzzle making it deceptively difficult to take apart. The cage conforms as closely as possible to the size of the projector, which allows a more secure design & makes it more attractive. Security is enhanced because the projector can't be maneuvered within the enclosure to squeeze it out of an aperture, & also an attempt to cut the cage would almost certainly damage the projector. ...

The Techmount TM-CC is a universal projector ceiling bracket designed to secure 99% of data projectors safety & sturdily to ceilings. It is designed for applications where no ‘drop’ is required so no pole is included. It holds the projector 110mm away from the ceiling. Robust Construction High standard of finish & over-engineered for stability & safety. A rugged high-quality satin-white finish blends with ceiling tiles. Manoeuvrable The top & bottom parts can rotate 360 degrees, & the spider arms have a maximum span of 340mm. Sloping Ceilings? A tilting mechanism is built in allowing you to use the bracket with cathedral-type ceilings. Safety Approved As with all projector Techmounts a safety cable is included to attach to the projector. The TM-CC has a recommended maximum safe working load (SWL) of 10kg which is well within the limits of the product. Easy fit Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. Not all use the same diameter screws we provide a selection to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, & insert a screw into the projector. Tools Included A spanner & pin-hex key are included. Secure Quick-release mechanisms make life easier for thieves so the TM-CC comes with secure pin-hex bolts. ...

VISION TECHCONNECT STEREO AMPLIFIER V2 LED display, 2x 20w (rms @ 8 ohms), 2 x stereo line-level inputs (Input 1 is duplicated on front & rear panel), low impedance digital amplifier. IR Remote control included. IR receiver duplicated on front & rear ...

Vision TM-1200 Techmount 1m Extension Pole, White, For High-ceiling Applications To To Extend The Tm-1200's Standard 1.1m Pole. Coupler Integrated. Can Be Daisy-chained. The 1m male-to-female extension poles can be daisy-chained if you have a really high ceiling. ...

Vision TM-1200 Universal Mounting Kit for Projectors 1.2m Ceiling Mount Satin White The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety & sturdily to your ceiling. Included: 1 x H50 Pin-Hex key 1 x 17mm Spanner 4 x M3 43mm screws 4 x M4 43mm screws 4 x M5 43mm screws 4 x M2.5 43mm pan slot for Optoma & Acer 4 x M8 50mm Ceiling fixtures with rawl plugs. 1 x Drilling Jig, 1 x Safety Tether, 1 x Ceiling Trim Disc ...