TRENDnet’s 28-Port Gigabit Web Smart Po E+ Switch, model TPE-2840WS, offers 4 x Gigabit Po E+ ports (Ports 1-4 802.3at), 20 x Gigabit Po E ports (Ports 5-24 802.3af), 4 x SFP slots, & a Po E Power budget of 185 Watts. This IPv 6 ready switch offers advanced traffic management, troubleshooting, access control, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design
- Provides 4 x Gigabit Po E+ ports (Ports 1-4 802.3at), 20 x Gigabit Po E ports (Ports 5-24 802.3af), 4 x SFP slots, a Po E Power budget of 185 Watts, &

Includes:: rackmount brackets. Smart Fan
- Smart fan saves energy by varying fan speed & use based on cooling needs. IPv 6 Ready
- This switch supports IPv 6 configuration & IPv 6 neighbor discovery. Traffic Management
- A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, Bandwidth Controls, GVRP, IGMP v 1-v 3, 802.1p Class of Service (Co S), Spanning Tree (STP, RSTP, & MSTP), & Qo S queue scheduling. Troubleshooting
- Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aid in rapid troubleshooting. Access Controls
- Features such as ACL, SSL, MAC/port filtering, Denial of Service controls, 802.1X, TACACS+, & RADIUS are compatible with layered network access controls. Monitoring
- RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.








...

TRENDnet’s 48-Port Gigabit Web Smart Po E+ Switch, model TPE-4840WS, offers 12 x Gigabit Po E+ ports (ports 1-12 802.3at), 12 x Gigabit Po E ports (ports 13-24 802.3af), 24 x Gigabit ports (ports 25-48), 4 x shared SFP slots (shared with ports 45-48), & a Po E Power budget of 370 Watts. This IPv 6 ready switch offers advanced traffic management, troubleshooting, access control, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Provides 12 x Gigabit Po E+ ports (ports 1-12 802.3at), 12 x Gigabit Po E ports (ports 13-24 802.3af), 24 x Gigabit ports (ports 25-48), 4 x shared SFP slots (shared with ports 45-48), a Po E Power budget of 370 Watts, &

Includes:: rackmount brackets. Smart Fan Smart fan saves energy by varying fan speed & use based on cooling needs. IPv 6 Ready This switch supports IPv 6 configuration & IPv 6 neighbor discovery. Traffic Management A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, Bandwidth Controls, GVRP, IGMP v 1-v 3, 802.1p Class of Service (Co S), Spanning Tree (STP, RSTP, & MSTP), & Qo S queue scheduling. Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aid in rapid troubleshooting. Access Controls Features such as ACL, SSL, MAC/port filtering, Denial of Service controls, 802.1X, TACACS+, & RADIUS are compatible with layered network access controls. Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions. Features 12 x Gigabit Po E+ ports 12 x Gigabit Po E ports 24 x Gigabit ports & 4 shared SFP slots 370 Watt Po E budget 96 Gbps switching capacity Private/ Voice VLAN, Qo S, & bandwidth controls Smart fans reduce energy consumption Rack mount brackets included Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

TRENDnet’s Gigabit Po E+ Repeater, model TPE-E100, extends a Gigabit Po E/ Po E+ network connection to a remote location. It auto-detects a Po E (15.4 Watts) or Po E+ (30 Watts) signal & extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the Po E device. Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.)*. Handy mounting points & no external power adapter facilitate remote installations. Extension Distance Extends a Po E/ Po E+ network connection an additional 100 (328 ft.) meters for a total distance of up to 200 meters (656 ft.) from the Po E device Po E/ Po E+ Auto detects a 15.4 Watt Po E (IEEE 802.3af class 1-4) or 30 Watt Po E+ (IEEE 802.3at) network connection Gigabit Ports Gigabit ports extend a high performance wired connection Daisy Chain Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.) Plug & Play Plug & play Po E/ Po E+ network cables Po E Powered No external power required—saves installation time & cost Mounting Wall mounting points for remote installations LED indicators LED indicators confirm Po E & network connectivity Housing Rugged metal enclosure Features Extends 100 meters for a total distance of up to 200 meters (656 ft.) Daisy chain two TPE-E100s for a total Po E+ network extension of 300 m (980 ft.) Plug & play installation No external power required Wall mountable LED indicators Rugged metal housing ...

TRENDnet’s Gigabit Po E+ Repeater, model TPE-E100, extends a Gigabit Po E/ Po E+ network connection to a remote location. It auto-detects a Po E (15.4 Watts) or Po E+ (30 Watts) signal & extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the Po E device. Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.)*. Handy mounting points & no external power adapter facilitate remote installations. Extension Distance Extends a Po E/ Po E+ network connection an additional 100 meters for a total distance of up to 200 meters (656 ft.) from the Po E device Po E/ Po E+ Auto detects a 15.4 Watt Po E (IEEE 802.3af class 1-4) or 30 Watt Po E+ (IEEE 802.3at) network connection Gigabit Ports Gigabit ports extend a high performance wired connection Daisy Chain Up to 7 units for a Po E+ (802.3at) network connection Up to 4 units for a Po E (802.3af) network connection Plug & Play Plug & play Po E/ Po E+ network cables Po E Powered No external power required—saves installation time & cost Mounting Wall mounting points for remote installations LED indicator LED indicator confirms power Housing Rugged metal enclosure Features Extends 100 meters for a total distance of up to 200 meters (656 ft.) Daisy chain up to 7 units for a total Po E+ network extension of 800 m (2, 600 ft.) * Plug & play installation No external power required Wall mountable Rugged metal housing ...

TRENDnet’s 16-Port 30 Watt 10/100 Mbps Po E+ Switch, model TPE-T160, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. The IEEE 802.3at Po E+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Network Cameras, & Vo IP telephony systems. Auto sensing technology delivers up to 30 watts to 802.3at Po E+, 15 watts to 802.3af Po E, & only data to non-Po E devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps. LED indicators display device status for easy power management & troubleshooting. An internal power supply reduces clutter & a convenient on/off button is located on the back of the switch. Use this switch with TRENDnet Po E Splitters to install non-Po E devices in remote locations. Features IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Support Po E class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 16 x 10/100 Mbps Auto-MDIX Po E+ ports Provides 30 watts per Po E port 3.2 Gbps switching fabric On/off power switch Full wire-speed non-blocking switching Store-&-forward switching method Back pressure Flow Control for half-duplex mode IEEE 802.3x Flow Control for full-duplex mode 1.25 Mbits RAM Data Buffer 4K MAC address entries 500 watt Internal Power supply: AC input (90~260V/AC, 50~60 Hz) Plug & Play Sturdy 1U 19” rack mountable metal enclosure 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s 8-Port 30 Watt 10/100 Mbps Po E+ Switch, model TPE-T80, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. The IEEE 802.3at Po E+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Network Cameras, & Vo IP telephony systems. Auto sensing technology delivers up to 30 watts to 802.3at Po E+, 15 watts to 802.3af Po E, & only data to non-Po E devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 1.6 Gbps. LED indicators display device status for easy power management & troubleshooting. An internal power supply reduces clutter & DIP switches on the front panel allow managers to manually cut Po E power to a given port. Use this switch with TRENDnet Po E Splitters to install non-Po E devices in remote locations. Features IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Support Po E class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 8 x 10/100 Mbps Auto-MDIX Po E+ ports Provides up to 30 watts per Po E port 1.6 Gbps switching fabric 8 DIP switches turns Po E support on/off per port Full wire-speed non-blocking reception & transmission Store-&-forward switching method Back pressure Flow Control for half-duplex mode IEEE 802.3x Flow Control for full-duplex mode 1.25 Mbits RAM Data Buffer 4K MAC address entries 250 watt Internal Power supply: AC input (90~260V/AC, 50~60 Hz) Plug & Play Sturdy metal enclosure 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com ...

The 8-Port 10/100 Mbps Po E+ Switch, model TPE-T80H, delivers data & power over existing Ethernet cables to Power over Ethernet (Po E) devices such as Access Points & IP Cameras. It supplies up to 30 Watts of power per port with a 125 Watt power budget. A convenient on/off button is located on the back of the switch & a rack mount kit is included. Hardware Po E+ Supplies up to 30 Watts of Po E power per port with a 125 Watt power budget Ports 8 x 10/100 Mbps Po E+ ports Switching Capacity 1.6 Gbps switching capacity Rack Mountable Rack mountable metal enclosure with included mounting kit On/ Off Convenient on/off switch LED Indicators LED indicators convey port status ...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

TRENDnet’s 8-Port Gigabit Po E+ Switch, model TPE-TG80g, offers 8 x Gigabit Po E+ ports (30 Watts/port), a 16 Gbps switching capacity, & a Po E power budget of 123 Watts. Plug & Play this sturdy metal switch for reliable high speed Po E networking. Features Po E+ Supplies up to 30 Watts of Po E power per port with a 123 Watt power budget Ports 8 x Gigabit Po E+ Ethernet ports Switching Capacity 16 Gbps switching capacity Jumbo Frame Sends Jumbo Frames (up to 9 Kbytes) for increased performance Energy Savings Embedded GREENnet technology reduces power consumption Housing Rugged metal enclosure LED Indicators LED indicators convey port status ...

TRENDnet’s 8-Port Gigabit GREENnet Po E+ Switch, model TPE-TG81g, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. This unmanaged switch offers eight Gigabit Po E+ ports which supply up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan / Tilt / Zoom) Network Cameras, & Vo IP telephony systems. This rack mountable switch features an internal power supply. Auto sensing technology delivers 30 watts to 802.3at Po E+ devices (up to 3 devices), 15 watts to 802.3af Po E devices, & only data to non-Po E devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case & quickly adds Po E+, Po E, & non-Po E devices to your network. Features IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Supports Po E Class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 8 x Gigabit Auto-MDIX Po E / Po E+ ports Internal power supply Up to 75% GREENnet energy savings Provides up to 30 watts for Po E+ (3 ports max.) Provides up to 15.4 watts for Po E Automatically detects the Po E class level of a Powered Device 16 Gbps switching fabric Forwarding rate: 1000 Mbps / 1, 488, 000pps; 100 Mbps / 148, 800 pps; 10 Mbps / 14, 880 pps Status LEDs: System Power, Po E, 1000 Mbps, & Link / Activity 2K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception & transmission Store-&-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports & when a connected device is in standby mode Jumbo Frame support up to 9 Kbytes Plug & Play Sturdy rack mountable metal case 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...