The TFC-110S60 Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter spanning distances up to 60km (37.2 miles). Ports include 1 x 10/100 Base-TX (RJ-45) port & 1 x 100 Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10 Base-T & IEEE 802.3u 100 Base-TX / 100 Base-FX standards 1 x 10/100 Base-TX auto-negotiation RJ-45 port Auto-negotiation 10/100 Mbps connection speed & Half/ Full-duplex mode on TX port Auto MDIX for 10/100 Base-TX port 1 x 100 Mbps fiber port with single-mode SC-type connector Status LED indicators for Power, Link/ Activity, Full-Duplex, & Speed Provides dip-switch for full & half duplex selection on fiber port Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty ...

The TFC-110S60i Intelligent Fiber Converter works with the TFC-1600 chassis system or as standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP & spans distances up to 60km (37.3 miles). Ports include 1 x 10/100 Base-TX (RJ-45) port & 1 x 100 Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10 Base-T & IEEE 802.3u 100 Base-TX, 100 Base-FX Standards Provides Dip switch to set: Fiber (FDX/HDX), UTP (Auto Negotiation/ Manual), Speed (10M/100M), LLR (Enable/ Disable), LLCF (Enable/ Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for FX port Monitor the status of duplex/link for FC, duplex / speed / link for TX via management module (TFC-1600MM) through Media Converter Chassis System (TFC-1600) Single-Strand Fiber Optic, Hot Pluggable & Wall-Mountable Optional 19” System Chassis (TFC-1600) holds up to 16 Media Converters 3-year limited warranty ...

TRENDnet's TFC-1600 16-slot EIA-19" Rack-Mount Chassis System provides housing for up to 16 TFC series media converters. Designed for continuous operation, the chassis is equipped with dual cooling fans & redundant power supplies (optional). Its Plug-&-Play & Hot-Swap features allow installing/removing the converter unit without powering off the chassis. TFC-1600 rack-mount chassis eliminates the external power adapters for TFC series media converters & organizes multiple converters in a single unit, which makes it the perfect solution for managing multiple TFC series converters. Provides housing for up to 16 TFC series media converters Front panel LEDs indication Standard 19" rack-mount size, 2U height Hot-Swappable; easy & quick replacement of converter & power supply Single cooling fan (internal) mounted at the rear panel Optional redundant power supply to ensure non-stop reliable operation Optional Management Module Load Sharing mechanism to minimize downtime (available only with redundant power supplies) Power isolation designed with converter bays: ensures each bay is electrically isolated from others 3-year limited warranty Optional Management Module (TFC-1600MM) 1 x 10/100 Mbps Fast Ethernet RJ45 port & 1 x RS-232 Console ports for management Web Browser Based Management via Ethernet port or Command Line Interface Management via RS-232 port SNMP Agent Provides media Link/ Connection Speed/ Duplex status for each module Provides Cooling Fans & Power Supplies status ...

The TFC-1600MM provides Chassis SNMP reporting & supports port based management for the TFC-1600, 16-Bay Fiber Converter Chassis System. Instant access to cooling fan & power supply status reports. Web browser based management via Ethernet port or Command Line Interface management via RS-232 serial port. 1 x 10/100 Mbps Fast Ethernet RJ45 port & 1 x RS-232 Console ports for management Web Browser Based Management via Ethernet port or Command Line Interface Management via RS-232 port SNMP Agent Provides media Link/ Connection Speed/ Duplex status for each module Provides Cooling Fans & Power Supplies status 1 Year Limited Warranty ...

TRENDnet’s Home Smart Switch with Wireless Extender, model THA-101, is a combination smart electrical outlet & powerful N300 wireless extender. Use the free Apple or Android™ mobile app from any internet connection to turn on & off a light, fan, electronic device, or appliance. Create a daily schedule to turn on/off the outlet to match your needs or to give the illusion that you’re home. Place the THA-101 in an area of your home with low wireless coverage – the powerful built-in N300 wireless extender connects to your existing wireless router & broadcasts a strong wireless network. Power Controller Quick App-Based Setup Complete the intuitive app-based setup in minutes Remote Power Control Turn a light, fan, electronic device, or appliance on/off from any mobile internet connection On/ Off Schedule Create a weekly on/off schedule for a light, fan, or another device to match your needs or to give the illusion that you’re home No Clutter The compact form factor stays off the ground by plugging directly into an outlet Free App TRENDnet’s free Apple & Android™ app controls multiple THA-101 units from any internet connection Power Consumption See how much power your device is consuming with real-time electrical consumption information listed within the app Over Current Protection Trips relay when current exceeds 16 Amps Wireless Extender Wireless Extender Extends the range of your existing Wireless network N300 Wireless Proven 300 Mbps Wireless N Wireless Coverage Extended wireless coverage with MIMO antenna technology One Touch Connection Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button LED Indicators LED indicators convey device status Compatibility Works with Wireless N & G routers ...

TRENDnet’s TI-PG541 is a reliable IP30 unmanaged Po E+ DIN-rail switch with hardened components rated for extreme industrial environments. It offers four Gigabit Po E+ ports (Ports 1-4, 802.3at), one Gigabit port, one SFP slot, & a full Po E power budget of 120 Watts. Dual redundant power inputs (power adapter sold separately) with overload current protection support zero downtime requirements. An alarm output can be triggered by a primary and/or redundant power failure. Full Po E+ Power Budget Supplies up to 30 Watts of Po E/ Po E+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt Po E power budget Network Ports 5 x Gigabit Ethernet ports (port 1-4 Po E/ Po E+) & 1 x SFP slot Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware Switching Capacity 12 Gbps switching capacity Redundant Power Dual redundant power inputs with overload current protection (power adapter sold separately: model 48VDC3000) Alarm Output Alarm output triggered by power failure of primary and/or redundant power (defined by DIP switch) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance Extreme Temperatures Hardened switch is rated for an operating temperature range of -20 to 60 degrees C (-4 to 140 degrees F) Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments Shock & Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), & vibration (IEC 60068-2-6) LED Indicators LED indicators convey power, redundant power, alarm, SFP, & network port status Grounding Point Grounding point protects equipment from external electrical surges Features 4 x Gigabit Po E+ (802.3at) ports, 1 x Gigabit port, & 1 x Gigabit SFP slot 120 W full Po E+ power budget 12 Gbps switching capacity Hardened IP30 rated metal switch with integrated DIN-Rail mount -20 to 60 degrees C (-4 to 140 degrees F) operating temperature range Dual redundant power inputs with overload current protection Alarm output triggered by power failure Power adapter sold separately Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 2-port DVI USB (Universal Serial Bus) KVM switch kit with audio, model TK-214I, means that you can control 2 PC and/or Mac computers with one set of console controls. Manage laptops or desktops that have DVI, USB (Universal Serial Bus), & audio ports at the touch of a button with one set of USB (Universal Serial Bus) keyboard, USB (Universal Serial Bus) mouse, DVI monitor, microphone, & speakers. No driver installation required, simply plug in the devices to control 2 computers. A convenient toggle switch with a 1.5 m extension cable can be placed in the most ergonomic location on your workstation. View crystal clear Digital Video Interface (DVI) resolution at up to 1920 x 1200 pixels. Built in 0.9 m combination cables include all the necessary USB (Universal Serial Bus), DVI, & audio connectors for each respective computer. ...

- Device Type: KVM / audio / USB (Universal Serial Bus) switch
- 2 ports
- Enclosure Type: Desktop
- Subtype: KVM
-



...

- Device Type: KVM / audio / USB (Universal Serial Bus) switch
- 4 ports
- Enclosure Type: Desktop
- Subtype: KVM
-



...

The 2- Port USB (Universal Serial Bus) Audio KVM Switch lets you control multimedia PCs with just one keyboard, monitor, mouse, microphone, & a set of speakers. The KVM switch not only means that you can share your monitor, keyboard & mouse but you can also share microphone & speakers. With just a simple press of a button, this KVM switch eliminates the hassle of cable swapping & switching between 2 PCs. ...