TRENDnet’s 4/6 d Bi Surge Outdoor Dual Band Omni Antenna Kit, model TEW-AO46S, comes with a pair of high performance outdoor antennas which support 2.4 & 5 GHz radio transmissions. The omni-directional antennas provide blanket wireless coverage, have an N-Type male connector, & feature a replaceable surge protection fuse. The antennas work with 802.11ac/n/g/b/a routers & access points with N-Type female connectors. Performance Antenna Kit Comes with a pair of outdoor antennas Outdoor Durable antenna construction for extreme outdoor conditions Omni-Directional Omni-directional antennas for blanket wireless coverage Dual Band Support (2.4 + 5 GHz) Compatible with 802.11ac/n/g/b/a routers & access points Antenna Gain 2.4 GHz peak gain: 4 d Bi, 5 GHz peak gain: 6 d Bi Surge Protection Replaceable surge protection fuse & grounding point N-Type Connector N-Type male connectors are compatible with routers & access points with N-Type female connectors ...

The Outdoor Arrestor Kit provides lightning protection for your wireless equipment. By adding a simple arrestor to your wireless antenna, you can reduce the costs in damaged switches, access points, or other network devices. Simply connect the Outdoor Arrestor Kit directly inline between your Access Point & your outdoor antenna cable, & connect the ground wire to a ground pole. Supports dual band 2.4 G Hz 802.11b/g/n & 5 G Hz 802.11a wireless devices Multi-strike capability & bi-directional protection helps protect devices from the erratic & unpredictable nature of lightning Color coded cable & adapter sleeves ensure easy installation Easy-to-install wall mounting No configuration or installation software required 3-year limited warranty ...

The low loss Reverse SMA to N-Type Cable extends your wireless Antenna up to 8 metres to provide optimal placement for your antenna outdoors. Connect business networks from building to building wirelessly or provide wireless Internet access for hot spot applications! This cable makes wireless communication possible by providing low loss communication between your access point & antenna. Wi-Fi Compliant with 2.4 G Hz 802.11 b/g & 5 G Hz 802.11a Devices for extending wireless networks Reverse SMA female to N-Type male Connector. Optimal placement of your existing Wi-Fi Device permits you to maximize its wireless performance Flexible outer conductor allows the tightest bend radius available for any cable of similar size & performance Provides flexible Low-loss communication for wireless antenna Multi-ply bonded outer foil conductor is rated conservatively at > 90 d B. Weatherproof cable design for outdoors exposure with best materials for UV resistance Polyethylene jacketed cable designed for outdoor use Easy & quick deployment into a WLAN environment ...

TRENDnet’s 1-Port Wireless N Multi-Function USB (Universal Serial Bus) Print Server, model TEW-MFP1, transforms most st&-alone multi-function & standard USB (Universal Serial Bus) printers into a shared network resource. Install your multifunction printer in the most ergonomic location & then connect the compact TEW-MFP1 to a high speed Wireless N network. An intuitive utility supports Windows & Mac operating systems & provides a seamless user experience. Scan, fax, & print functionality from any networked workstation. Integrated Wireless N provides greater installation flexibility. An Ethernet port facilitates optional wired networking. Wi-Fi Protected Setup (WPS) streamlines the process of connecting to a wireless network. This compact device fits into the smallest spaces. 1 x 10/100 Mbps Auto-MDIX Fast Ethernet port (for optional wired installation) 1 x USB (Universal Serial Bus) 2.0 high speed port Wi-Fi Protected Setup (WPS) connects to wireless networks at the push of a button Compliant with IEEE 802.11n technology & compliant with IEEE 802.11b/g standards High-speed data rates of up to 150 Mbps with IEEE 802.11n Backwards Compatible with USB (Universal Serial Bus) 1.1 Devices Control Center utility supports Windows 7 (32/64-bit) / Vista (32/64-bit) / Windows XP (32/64-bit) & Mac OS X 10.4/10.5/10.6/10.7 operating systems Supports most All-In-One multi-function printers & regular USB (Universal Serial Bus) printers Share multi-function printers & regular USB (Universal Serial Bus) printers over the network Control Center utility

Includes:: built in scan feature Supports Net USB technology Share USB (Universal Serial Bus) peripheral devices over the network including; digital cameras, web cams, speakers, iPods™, flash drives, external hard drives, printers, & memory card readers Universal Plug & Play (UPn P) installation Diagnostic LEDs 3-year limited warranty

...

The TFC-110MSC Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode SC-Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100 Base-TX (RJ-45) port & 1 x 100 Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10 Base-T & IEEE 802.3u 100 Base-TX / 100 Base-FX standards One 10/100 Base-TX auto-negotiation RJ-45 port Auto-negotiation 10/100 Mbps connection speed & Half/ Full-duplex mode on TX port Auto MDIX for 10/100 Base-TX port One 100 Mbps fiber port with Multi-mode SC-Type Connector Half / Full-Duplex mode selector on Fiber port Status LED indicators for Power, Link/ Activity, Full-Duplex, & Speed Wall-Mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty ...

The TFC-110S60i Intelligent Fiber Converter works with the TFC-1600 chassis system or as standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP & spans distances up to 60km (37.3 miles). Ports include 1 x 10/100 Base-TX (RJ-45) port & 1 x 100 Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10 Base-T & IEEE 802.3u 100 Base-TX, 100 Base-FX Standards Provides Dip switch to set: Fiber (FDX/HDX), UTP (Auto Negotiation/ Manual), Speed (10M/100M), LLR (Enable/ Disable), LLCF (Enable/ Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for FX port Monitor the status of duplex/link for FC, duplex / speed / link for TX via management module (TFC-1600MM) through Media Converter Chassis System (TFC-1600) Single-Strand Fiber Optic, Hot Pluggable & Wall-Mountable Optional 19” System Chassis (TFC-1600) holds up to 16 Media Converters 3-year limited warranty ...

TRENDnet's TFC-1600 16-slot EIA-19" Rack-Mount Chassis System provides housing for up to 16 TFC series media converters. Designed for continuous operation, the chassis is equipped with dual cooling fans & redundant power supplies (optional). Its Plug-&-Play & Hot-Swap features allow installing/removing the converter unit without powering off the chassis. TFC-1600 rack-mount chassis eliminates the external power adapters for TFC series media converters & organizes multiple converters in a single unit, which makes it the perfect solution for managing multiple TFC series converters. Provides housing for up to 16 TFC series media converters Front panel LEDs indication Standard 19" rack-mount size, 2U height Hot-Swappable; easy & quick replacement of converter & power supply Single cooling fan (internal) mounted at the rear panel Optional redundant power supply to ensure non-stop reliable operation Optional Management Module Load Sharing mechanism to minimize downtime (available only with redundant power supplies) Power isolation designed with converter bays: ensures each bay is electrically isolated from others 3-year limited warranty Optional Management Module (TFC-1600MM) 1 x 10/100 Mbps Fast Ethernet RJ45 port & 1 x RS-232 Console ports for management Web Browser Based Management via Ethernet port or Command Line Interface Management via RS-232 port SNMP Agent Provides media Link/ Connection Speed/ Duplex status for each module Provides Cooling Fans & Power Supplies status ...

The TFC-1600MM provides Chassis SNMP reporting & supports port based management for the TFC-1600, 16-Bay Fiber Converter Chassis System. Instant access to cooling fan & power supply status reports. Web browser based management via Ethernet port or Command Line Interface management via RS-232 serial port. 1 x 10/100 Mbps Fast Ethernet RJ45 port & 1 x RS-232 Console ports for management Web Browser Based Management via Ethernet port or Command Line Interface Management via RS-232 port SNMP Agent Provides media Link/ Connection Speed/ Duplex status for each module Provides Cooling Fans & Power Supplies status 1 Year Limited Warranty ...

TRENDnet’s Home Smart Switch with Wireless Extender, model THA-101, is a combination smart electrical outlet & powerful N300 wireless extender. Use the free Apple or Android™ mobile app from any internet connection to turn on & off a light, fan, electronic device, or appliance. Create a daily schedule to turn on/off the outlet to match your needs or to give the illusion that you’re home. Place the THA-101 in an area of your home with low wireless coverage – the powerful built-in N300 wireless extender connects to your existing wireless router & broadcasts a strong wireless network. Power Controller Quick App-Based Setup Complete the intuitive app-based setup in minutes Remote Power Control Turn a light, fan, electronic device, or appliance on/off from any mobile internet connection On/ Off Schedule Create a weekly on/off schedule for a light, fan, or another device to match your needs or to give the illusion that you’re home No Clutter The compact form factor stays off the ground by plugging directly into an outlet Free App TRENDnet’s free Apple & Android™ app controls multiple THA-101 units from any internet connection Power Consumption See how much power your device is consuming with real-time electrical consumption information listed within the app Over Current Protection Trips relay when current exceeds 16 Amps Wireless Extender Wireless Extender Extends the range of your existing Wireless network N300 Wireless Proven 300 Mbps Wireless N Wireless Coverage Extended wireless coverage with MIMO antenna technology One Touch Connection Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button LED Indicators LED indicators convey device status Compatibility Works with Wireless N & G routers ...

TRENDnet’s TI-IG60 is a reliable IP30 rated Industrial Gigabit Po E+ Injector with hardened components rated for extreme industrial environments. Connect the TI-IG60 to a non-Po E Gigabit switch & then run an Ethernet cable up to 100 meters (328 ft.) to network a Po E device. The TI-IG60 supplies power to a Po E (up to 15 W), Po E + (up to 30 W), high power Po E+ (36 W), or 60 Watt Po E device. Dual redundant power inputs (power supply sold separately: TI-S12048) with overload current protection support zero downtime applications. Both DIN-rail & wall mount hardware is included. ...