About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend C001 X 1/4
Tungsten Carbide Two
Flute 3.2mm
£12.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. Diameter
- 1/8 in. 3.2 mm. Cutting Length
- 3/8 in. 9.5 mm. T.C.T. 2 Flutes.

...
Archived Product
Trend C002 X 1/4 Tungsten Carbide Two Flute 4.0mm
Trend C002 X 1/4
Tungsten Carbide Two
Flute 4.0mm
£12.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 5/32 in. 4.0 mm. C
- Cutting Length
- 7/16 in. 11.1 mm. T.C.T. 2 Flutes.



...
Archived Product
image missing
Trend C005 X 1/4
Tungsten Carbide Two
Flute 6.0mm
£9.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 15/64 in. 6.0 mm. C
- Cutting Length
- 5/8 in. 16 mm. T.C.T. 2 Flutes.



...
Archived Product
image missing
Trend C007 X 1/4
Tungsten Carbide Two
Flute 6.3mm
£9.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 1/4 in. 6.3 mm. C
- Cutting Length
- 3/4 in. 19.1 mm. T.C.T. 2 Flutes.



...
Archived Product
Trend C012bx1/4tc Router Cutter 1/4 Tc
Trend C012bx 1/4tc
Router Cutter 1/4 Tc
£10.49
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=23/64 inch. D=9 mm. Cut length=3/4 inch. Cut length=19 mm. Shank Diameter=1/4 inch. ...
Archived Product
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4
Tungsten Carbide Two
Flute 9.5mm
£11.00
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D1 3/8 inch. D1 9.5 mm. Cut length 1 inch Cut length 25.4 mm. Shank Diameter 1/4 inch. ...
Archived Product
Trend C016 X 1/4 Tungsten Carbide Two Flute 10.0mm
Trend C016 X 1/4
Tungsten Carbide Two
Flute 10.0mm
£12.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 10 mm. C
- Cutting Length
- 19.1 mm. T.C.T.



...
Archived Product
image missing
Trend C019 Router
Cutter 1/4 Shank Tc
£12.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=15/32 inch. D=12 mm. Cut length=3/4 inch. Cut length=19.1 mm. Shank Diameter=1/4 inch. ...
Archived Product
image missing
Trend C024ax 1/4tc
Straight Cutter 1/4
Tct
£13.49
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=19/32 inch. D=15 mm. Cut length=63/64 inch. Cut length=25 mm. Shank Diameter=1/4 inch. ...
Archived Product
image missing
Trend C041 Router
Cutter 1/4 Shank Tc
£11.99
These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table shows angles from the horizontal & the profiles show angles from the vertical. D=1/2 inch. D=12.7 mm. Cut length=1/2 inch. Cut length=12.7 mm. Overall length=46 mm. A=104 degrees. Shank Diameter=1/4 inch. ...
Archived Product

Trend C013x1/4tc C013 X 1/4 Tct Two Flute 9.5mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating and shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D - Diameter: - 3/8 in. 9.5 mm. C - Cutting Length - 1 1/4 in. 31.8 mm. T.C.T. 2 Flutes.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 500051
Availability: In Stock
£10.49
computers DEFAULT
Description Reviews / Comments Add New

Product Description

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter:
- 3/8 in. 9.5 mm. C
- Cutting Length
- 1 1/4 in. 31.8 mm. T.C.T. 2 Flutes.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm Ebuyer
£11.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
cutting - The seperation of an object usually using a cutting tool such as a knife
Wide - Something with a large width.
Flute - A long silver instrument with buttons to press to make different notes.
Chipboard - A piece of wood like material that us used to pin paper and notes too.
MDF - A shortened term for Medium Density Fibreboard
Feature - An attribute that makes something stand out.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu