Aquamac 63 strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted it is necessary to notch the seal end. Returns to original shape after compression. Stretching & shrink back at corners avoided. Suitable for all main timber. Low compression force helps ease window & door operation. Maintains weathering characteristics & resists compression set over a wide temperature range +-70 C to
- 30 has proved that Aquamac TM Weatherseal gives high levels of sound reduction. Unaffected by paint stains window & door types. Aquamac 63 strip is a seal which is fitted into the frame aperture using four cut lengths & is available in either White or Brown. Size 25 metre (approx. length) Colour White.
...

A range of one handed bar clamp & spreaders for a variety of clamping applications. One handed operation. Ergonomically designed glass reinforced nylon plastic handles with thermal plastic rubber grips for comfort. Clamping force 112kg (247 Ibs). 1100 Nm. Heavy duty mechanism with precision engineered carbon steel bar for rigidity. Removeable thermal rubber pads. Max Throat Depth (D)=80 mm (3 1 / 8 inch) Max Opening (O)=610 mm (24 inch) Spreading capacity=170 mm (6 3 / 4 inch) to 812 mm (32 inch) Steel Section (S)=19 mm x 6 mm Weight=1010g. ...

Biscuit jointing has proven to be one of the strongest fastest safest & most accurate ways to join hard & soft woods plywood composition boards etc. Compared to dowelling biscuit joinery is faster & more precise. The biscuits are made from laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue). Size. No. 10. Packed in 1000s. ...

Biscuit joining has proven to be one of the strongest, fastest, safest & most accurate ways to join hard & soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster & more precise. The biscuits are made from laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue). Size. No. 20. Packed in 1000 s. Size; 60 mm. x 23 mm. x 4 mm. ...

Trend biscuits are made from die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as P V. A glue. They are ideal for strong, fast, & accurate jointing of hard & soft woods, plywood & composition board. Compared to doweling, biscuit jointing is faster & more precise. ...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 5/32 in. 4.0 mm. C
- Cutting Length
- 7/16 in. 11.1 mm. T.C.T. 2 Flutes.



...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 15/64 in. 6.0 mm. C
- Cutting Length
- 5/8 in. 16 mm. T.C.T. 2 Flutes.



...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 1/4 in. 6.3 mm. C
- Cutting Length
- 3/4 in. 19.1 mm. T.C.T. 2 Flutes.



...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=23/64 inch. D=9 mm. Cut length=3/4 inch. Cut length=19 mm. Shank Diameter=1/4 inch. ...

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter:
- 3/8 in. 9.5 mm. C
- Cutting Length
- 1 1/4 in. 31.8 mm. T.C.T. 2 Flutes.



...