Tripp Lite Basic Power Distribution Units / PDU systems offer reliable rackmount power distribution. Supplies equipment with continuous power from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories.

...

92V EXTERNAL BATTERY PACK SELECT TRIPP LITE UPS 3U RACK/TO External Battery Pack Gives Your Compatible Tripp Lite UPS System Extended Runtime The BP192V12RT3US is compatible only with Tripp Lite UPS systems that specify the use of this battery pack (see System Requirements below). Not only does this external battery pack provide extended runtime, but it can also be daisy-chained using its input/output connectors to additional external battery packs for even longer extended-run operation. Heavy-gauge cabling with high-current DC connectors is included for simple installation. Smart Battery Communicates with Your UPS for Optimal Performance This external battery pack with included power & data cabling is automatically sensed by the UPS for highly accurate runtime reporting & ideal charge current settings. An additional data cable reports battery pack temperature to the UPS to enable temperature-compensated charging to extend battery lifespan & fast recharge. Mounts in 3U of Space in 19 in. 4-Post Racks This smart battery pack's multi-use form factor supports stacking or mounting in 3U of space in EIA-standard 19-inch racks using the included 4-post rack-mounting brackets. The four replaceable internal battery trays can be easily removed to make the battery pack lighter for rack-mount installation. The BP192V12RT3US is also compatible with Tripp Lite's 2-9USTAND for upright tower configuration & 2POSTRMKITHD for 2-post racks (both accessories sold separately). ...

With Tripp Lite's new Category 6 snagless molded patch cables you can stay ahead of the game by distributing data, voice & video at higher speeds. These cables deliver stable performance up to 550 M Hz. Each comes UL verified & meets EIA/TIA Cat 6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire & a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in Category 6, Category 5e & Category 5 applications. Cat 6 cables are available in a variety of colors with a snagless boot preventing cable snags. &9679; Premium cabling for category 6, category 5e & category 5 applications &9679; Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation &9679; Length: 0.31 m/
Colour: Grey/ Connectors: RJ45 male &9679; Drastically reduce impedance & structural return loss compared to standard 100 M Hz wire &9679; High-quality copper wire & a staggered-pin plug design to keep near-end crosstalk levels to a minimum &9679; Feature molded connectors with integral strain relief &9679; Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 & ETL (category 6 draft 11) &9679; PVC 4-pair stranded UTP &9679; Deliver stable performance up to 550 M Hz/1 Gbps &9679; Premium cabling for Category 6, Category 5e & Category 5 applications, rated for 550 MHz/1 Gbps communications &9679; Designed to meet Category 6 specifications; reduces cross-talk & return loss &9679; IEEE 802.3ab &9679; PVC 4-pair stranded UTP &9679; Features boots with integral strain-relief & RJ45 (Male) connectors System Requirements &9679; For 1000 Base-T (1 Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice & Token Ring TYPE 3 applications as well as EIA/TIA applications. Package

Includes:: &9679; 0.31 m Cat 6 Gigabit Grey Snagless Molded Patch Cable


...

Tripp Lite Dual Source PDU PDUBHV10
- Power distribution unit (rack-mountable )
- AC 200/208/220/230/240 V
- 2.3 k W
-



...

This Envirosense monitoring unit from Tripp Lite must be used in conjunction with SNMPWEBCARD’s or intelligent PDU’s. Remote Monitoring Easy to install this Envirosense unit provides remote monitoring of temperature & humidity levels. Its dry contact interface also allows it to monitor & control other equipment such as alarms & telecoms devices. When specific temperatures are reached the Envirosense unit will trigger a graceful shutdown. Reliable Solutions Tripp Lite provide reliable solutions for UPS systems increasing performance & efficiency. Features &
- ; Remote monitoring &
- ; Easy installation &
- ; Temperature & humidity monitoring &
- ; Can monitor alarms, security & telecoms devices &
- ; Connects to SNMPWEBCARD’s &
- ; Limited two year warranty &
- ; Made by Tripp Lite






...

BP72V18-2US rack/tower external battery pack offers extended battery runtime when used in conjunction with expandable 72V Tripp Lite rackmount or tower UPS systems.

Includes:: heavy gauge cabling with high current DC connector for safe, simple installation. Included daisychain connector enables the connection of additional compatible 72V external battery packs to the host UPS. Included mounting accessories support 2U rackmount installation in 4 post racks. Options for 2-point front-rail mounting, 2 post center-mounting, wallmount & upright tower installation available. Compatible with these UPS Systems
- SU3000RTXL2U, SU3000RTXL3U, SU3000RTXLCD2U, SU3000RTXLCD3U, SU3000RTXR3U, SU3000RTXR3UHW, SU3000XL, SU3000XLCD, SUINT3000RTXL2U, SUINT3000RTXL3U & other Tripp Lite UPS systems that specify the use of this battery pack. &9679; Offers extended-run UPS operation when used in conjunction with compatible 72V DC Tripp Lite UPS systems &9679;

Includes:: heavy gauge cabling with high current DC connectors for simple installation &9679; Daisychain connector enables the connection of additional compatible 72V external battery packs to the host UPS &9679; Included mounting brackets support rackmount installation in 4 post racks using only 2 rack spaces (2U) &9679; UPDHDEARKIT option supports 2 point front-rail rackmount installation without rear supports &9679; 2POSTRMKITWM option supports balanced 2 point center-mounting in 2 post equipment racks &9679; 2POSTRMKITWM option also enables wallmount installation &9679; 2-9USTAND option enables upright tower placement &9679; Extends the runtime of compatible 72V Tripp Lite UPS Systems &9679; Included daisychain connector supports the addition of multiple compatible external battery packs &9679; Supports 2U rackmount installation; 4 post installation accessories included &9679; Options for 2 post rackmount, tower & wallmount installation available Package

Includes:: &9679; BP72V18-2US external battery pack with attached DC cabling &9679; 4 post compatible mounting hardware &9679; Owner's manual






...

Tripp Lite’s B070-016-19-IP KVM Switch gives you a rack-mountable full keyboard, LCD & touchpad in a single console that occupies only 1U of rack space. Easy to install & use, it’s the optimal solution for controlling up to 16 computers/servers locally, from across the room, down the street or halfway around the globe on a LAN, WAN or Internet. The B070-016-19-IP uses inexpensive, user-supplied Cat 5e/6/6a cabling with Server Interface Units so you can control computers/servers located up to 30.5 m away from the switch. This switch features two 10/100 Mbps LAN ports, so if one fails, the other takes over, keeping remote access uninterrupted. Users can switch easily between the 16 ports using an on-screen display (OSD). Multi-level password protection prohibits unauthorized users from accessing the connected computers, & a local user & a remote user can be logged on simultaneously. The built-in 19” LCD screen supports video resolutions up to 1366 x 768. Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls & routers; you can assign individual ports to an IP PDU port to power on/off the server connected to that port. The B070-016-19-IP stores neatly in a rack drawer & pulls out when needed. This KVM console is compatible with both Windows & Linux operating systems, & provides remote access using a Windows computer. Heavy-duty steel housing stands up to frequent use. Free Net Commander-AXS Management Software is available for access & control of all of your Tripp Lite Net Commander IP KVM switches (B070 & B072 series). From a single interface, you can access server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, & manage KVM settings. This software can be found on the model support page of the B070-016-19-IP, or via searching Net Commander-AXS on www.tripplite.com Saves Space & Money &9679; Combines 16-port KVM switch, 19” LCD screen, keyboard & touchpad in a single 1U rack-mountable drawer &9679; Mounts into 19”-wide rack, 27”-42” deep; to mount in a 2-post rack, use Tripp Lite’s B019-000 &9679; Inexpensive Cat 5e/6/6a cabling lets you locate servers up to 30.5 m from the switch &9679; Use a Server Interface Unit, B078-101-USB (Universal Serial Bus)-1 (for USB) with each server that will be connected with Cat 5 cable &9679; To convert Display Port or HDMI computers to VGA, use Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary. IP Remote Access for Fewer Trips to the Server Room &9679; Remote access means there’s no need to travel to the server room or network closet &9679; Java-based application allows Windows computers to control a target server via web browser from any location over a secured IP connection &9679; A non-browser client is available that allows Windows computers to remotely access the KVM without the need for a browser & without the need to install Java &9679; 1 local + 1 remote user can access different ports concurrently; up to 5 users can share a single session &9679; Supports both IPv 4 & IPv 6 &9679; Free Management Software available to Access & Control all of your Tripp Lite Net Commander IP KVM's (B070 & B072 IP series) from a single interface Simplifies IT Tasks &9679; On-screen display, hot keys & remote toolbar for easy use &9679; 2 serial ports allow control of serial-manageable devices such as IP PDUs, firewalls & routers &9679; Add IP PDUs as devices that can be controlled by the KVM; assign individual ports to an IP PDU port to power on/off the server connected to that port &9679; Virtual Media allows a. iso file to be mounted to a target server & accessed as if it were directly stored on it &9679; Fast Virtual Media KVM System patented under Pat. No. US 9, 417, 720 &9679; System-sent messages to SNMP server notify you of LAN failures &9679; Supports RADIUS & LDAP/S authentication &9679; Log tracks events on your installation Large 19” LCD &9679; Supports video resolutions up to 1366 x 768; 1920 x 1080 remotely &9679; DDC emulation allows for optimal output to LCD Advanced Security Features &9679; Multi-level password protection: create administrator accounts with full access & user accounts with limited access &9679; Supports TLS 1.2 security protocol &9679; You can install SSL certificates to ensure secure transactions between web servers & browsers Long-Lasting Reliability &9679; Flash-upgradeable firmware over the network &9679; Heavy-duty steel housing stands up to use &9679; Control computers/servers locally or via LAN, WAN or Internet &9679; Occupies just 1U of space in a rack-mountable drawer &9679; Low-cost Cat 5 cabling allows longer distances, reduces cable clutter &9679; 19” LCD screen supports video resolutions up to 1366 x 768 &9679; Simultaneous support for 2 users – 1 local, 1 remote &9679; Free Management Software available to Access & Control all of your Tripp Lite Net Commander IP KVM's (B070 & B072 IP series) from a single interface &9679; Fast Virtual Media KVM System patented under Pat. No. US 9, 417, 720 System Requirements &9679; Computer with HD15 port, & USB (Universal Serial Bus) port or PS/2 keyboard/mouse ports &9679; User-supplied Cat 5e/6/6a cabling &9679; B078-101-USB (Universal Serial Bus)-1 (USB) or B078-101-USB2 (USB) Server Interface Unit is required for each connected computer/server; the B078-101-USB2 is required for Fast Virtual Media speeds up to 12 Mbps; the B078-101-USB (Universal Serial Bus)-1 can be used for Virtual Media, but only at speeds up to 1 Mbps &9679; For computers with Displayport or HDMI, change to VGA using Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary. &9679; Compatible with Windows & Linux operating systems &9679; Currently not compatible with HP Gen 10 Servers &9679; Remote access supported using Windows computers &9679; Remote console computers require minimum Pentium 4 with 2 GB memory &9679; Hardware versions: A new hardware version (v 2) of the B070-016-19-IP was released in 2014, & it requires different firmware than was used in the previous version (v 1). In the Support tab on this web page you will find a zip folder for the v 1 KVM. In addition to including the applicable firmware, it contains a FW Notes file that will tell you how to determine which hardware version you have, & therefore, which firmware you need to use. If you have a v 2 KVM, the latest firmware is that which came pre-installed on the KVM. &9679; Power consumption: 120V, 60 Hz, 30W Package

Includes:: &9679; B070-016-19-IP 1U rackmount console KVM switch with 19” LCD &9679; C13 to 5-15P power cord &9679; Rackmount hardware &9679; CD with owner's manual &9679; Quick start guide

...

Tripp Lite’s B070-016-19-IP2 Net Commander 16-Port Cat 5 1U Rack-Mount Console KVM Switch

Includes::

...

Tripp Lite's 16-port Net Commander Cat 5 IP KVM Switch is the optimal solution for remote control of multiple computers/servers by up to 3 independent, simultaneous users. A single unit occupies a mere 1U of rack space, yet can control up to 16 directly connected computers. Connected computers/servers can be located up to 100 ft. from the KVM switch, with support for video resolutions up to 1920 x 1080 @ 60 Hz. ...

Tripp Lite’s B040-016-19 KVM Switch gives you a rack-mountable keyboard, LCD & touchpad in a single console that occupies only 1U of rack space. Easy to install & use, it’s the cost-effective solution for controlling up to 16 directly connected computers/servers. The B040-016-19 has a built-in 19” LCD screen supports video resolutions up to 1366 x 768. You can switch easily between the 16 ports using on-console push buttons, an on-screen display (OSD) or keyboard hot key commands. Password protection prohibits unauthorized users from accessing the connected computers. With this KVM switch, you can increase the number of connected computers up to 256 by daisy-chaining up to 15 B042-Series KVM switches. Uses Tripp Lite P780-series combo cable kits that support both PS/2 & USB (Universal Serial Bus) connections without the need to purchase additional cables or adapters. An extra HD15 port allows an additional VGA monitor or an external console to be connected. Add a Tripp Lite B051-000 IP Remote Access Unit to connect from anywhere in the world. An additional USB (Universal Serial Bus) port lets you connect an external mouse or keyboard. When not in use, the B040-016-19 stores neatly in a rack drawer & pulls out when needed. This KVM console is compatible with all major operating systems. Rugged steel housing stands up to frequent use. Saves Valuable Space & Money &9679; Combines a 16-port KVM switch, 19” LCD screen, full keyboard & touchpad in a 1U rack-mountable drawer &9679; Mounts into 19”-wide rack, 27”-42” deep; can be mounted in a 2-post rack using Tripp Lite’s B019-000 &9679; Control up to 16 computers or servers from one easily accessible console – ideal when rack space is at a premium &9679; Flip-up/fold-down screen keeps console from blocking access to rack equipment when not in use &9679; Eliminates need to buy separate costly monitors, keyboards & mice for each computer/server Simplifies IT Tasks &9679; Switch easily between the 16 ports via on-console buttons, on-screen display or keyboard hot key commands &9679; Auto-scan mode automatically sequences through all active ports that are accessible to the user Large 19” LCD &9679; Extra-wide display makes multitasking easier &9679; Supports video resolutions up to 1366 x 768 Password Protection &9679; Single-level password security limits access to authorized users &9679; Two-level log-out allows manual log-out or automatic log-out after a user-defined period of time has passed Expandability & Long-Lasting Reliability &9679; A port is available for connecting an external console or a Tripp Lite B051-000 IP Remote Access Unit that will let you control your servers from virtually anywhere in the world &9679; Use the B040-016-19 with up to 15 B042-Series KVM switches daisy-chained to have access to up to 256 computers/servers &9679; Compatible with all major operating systems for easy integration into your existing structure &9679; Firmware is easily upgradable with included cable & utility &9679; Heavy-duty steel housing stands up to frequent use &9679; Uses just 1U of space in rack-mountable drawer &9679; 19” LCD screen supports video resolutions up to 1366 x 768 &9679; Simplifies IT tasks with easy switching between all 16 ports &9679; Password protection prevents unauthorized access &9679; Compatible with all operating systems System Requirements &9679; Computer with HD15 port, & USB (Universal Serial Bus) port or PS/2 keyboard/mouse ports &9679; P780-Series USB/PS2 combo KVM cable kit is required for each connected computer/server &9679; Compatible with all major operating systems &9679; Power consumption: 120V, 60 Hz, 33W; 230V, 50 Hz, 34W Package

Includes:: &9679; B040-016-19 1U rackmount console KVM switch with 19” LCD &9679; 4 ft. HD15 to DB9 firmware upgrade cable &9679; 6 ft. C13 to 5-15P power cord &9679; External VGA port terminator &9679; Rackmount hardware &9679; CD with owner's manual &9679; Quick start guide

...