The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on transferring data & at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data & at 1310nm on receiving data. Another TP-LINK's media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser

Specification at a full wire speed forwarding rate. It works at 850nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19'system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers.

...

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.

...

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. ...

The MC220L is a media converter designed to convert 1000 Base-SX/LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Link's 19"system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. ...

1000 Mbps High-Speed Transfer Rate — Fast & stable transmissions with advanced Home Plug AV2 Super-Fast Wired Connection — A gigabit port provides high-speed internet to PCs, IPTVs, & game consoles Plug & Play — No wiring & configuration required—simply plug in Easy Expansion — Expand coverage by simply adding more Powerline adapters Where there’s an Outlet, There’s a Network. The MP500 Kit transmits network data via existing electrical circuits, avoiding any negative influence obstacles have on the network. Enjoy a stable extended network with a transmission distance of up to 300 meters (on the same electrical circuit). Perfect for 4K streaming, online gaming, & graphics-intensive applications. 300 meters Range No New Wires or Drilling 1000 Mbps Home Plug AV2 Dual Gigabit Transmission Fast. Unlimited. Enjoyable. Equipped with advanced Home Plug AV2 technology, the maximum powerline transmission rate reaches a stunning 1000 Mbps—with a gigabit port that delivers a high-quality network through any one of your outlets. Plug & Play Immediately extend your network as soon as you connect one, without complex wiring & configuration. Simply connect an MP500 adapter to your router & plug another one into any outlet where you need wired internet service. Easy Expansion If a typical two-pack kit doesn’t meet all your networking needs, simply add more Powerline adapters to expand your network to any room. ...

Adapter casing may vary. Upgrade to the new chipset version for faster throughput
- QF 370669. TP-Links powerline adapter TL-PA211
...

Remote Control – Instantly turn connected devices on/off wherever you are through the Tapo app Schedule – Preset a schedule to automatically manage devices Timer - Create countdown timer lists for connected electronics Voice Control – Manage your smart plug with voice commands via Amazon Alexa or the Google Assistant Away Mode – Automatically turns devices on & off at different times to give the appearance that someone is home Compact Design - Mini-sized to avoid blocking adjacent sockets Easy Setup & Use - No hub required, set up quickly & manage easily through the free app ...

Full Gigabit Ports: 5x 10/100/1000 Mbps RJ45 ports Two Cables in One: With four Po E+ ports, transfers data & power on one single cable High Power Po E+: Support Po E Power up to 30 W for each Po E port & 65 W for all Po E ports* Long-Range up to 250 m: Increases Po E transmission distance to 250 m by Extend Mode* Isolation Mode: One click to divide traffic for specific ports for stability & security Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs Durable Metal Casing: Allows for efficient heat dissipation & long network life Plug & Play: Simple to use & saves your valuable time & effort ...

Cutting-edge 4G network – share internet access with up to 32 Wi-Fi devices & enjoy download speeds of up to 150 Mbps* Plug a SIM card & play – no configurations needed, compatibility for SIM cards in 100+ countries are assured by years of field tests Wi Fi speeds up to 300 Mbps – enjoy uninterrupted HD movies, rapid file downloads, seamless video chats, & more at the same time* Professional voice functions – supports Vo LTE/CSFB/ Vo IP functions & provides 50 MB of internal storage for 100 minutes of voicemail Two detachable advanced LTE antennas – enjoy stable & efficient connections to every device thanks to the two external antennas Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access as a backup option if you can't get a 4G connection Plug & Play, No Configuration With an integrated 4G LTE modem & a built-in SIM card slot, all you need to do is insert a micro SIM card & turn on the router. Enjoying fast, stable Wi Fi on a 4G LTE network has never been easier. Share Wi Fi over a 4G Network — Flexible & Stable Simply build your home Wi Fi network via 4G broadband access with download speeds of up to 150 Mbps. You can share the internet with multiple Wi Fi devices to enjoy uninterrupted HD movies, rapid file downloads, seamless video chats, & more at the same time. Enjoy Wi Fi & Phone Calls Simultaneously TL-MR6500v is not only a Wi Fi router & modem combo, but also a phone. It has a phone port to connect your existing landline phone so that you can make phone calls & surf the internet at the same time. Moreover, various voice functions are supported including Vo IP, Vo LTE, & CSFB. Simply enjoy a professional & high-quality voice call as you like. Built-in Storage for Voicemail Instead of paying for a voicemail service from your ISP, get free access if you own this modem/router/phone combo. With 50 MB of internet storage, TL-MR6500v records 100 minutes of voicemail. Never worry about missing any calls or messages when away from home. Special Design for Maximum Network Coverage Two detachable advanced antennas reinforce the wireless connection between the router & every device with more stability & flexibility. A built-in power amplifier & low noise amplifier also help provide wider coverage by improving the router’s sending & receiving capabilities. ...