Lightning 4G LTE Advanced The latest generation 4G LTE Advanced – Supports 4G LTE advanced network, compatible with 3G/2G network The Faster Connections – Reaches up to 300 Mbps download speed & 50 Mbps upload one, to enjoy HD movies without interruption, download files in seconds, & hold a video chat without dropouts Dual Band Wi-Fi Dual Band Wi-Fi – Selectable 2.4 G Hz or 5 G Hz dual band Wi-Fi achieves better network connectivity when you are in network interference. High-Speed Hotspots – Shares 2.4 G Hz 300 Mbps or 5 G Hz 867 Mbps Wi-Fi with up to 32 Wi-Fi devices. 15 Hours Usage 3000m Ah – 3000m Ah battery capacity 15 hours – 15 hours of 4G sharing 720 hours – 720 hours of standby * Actual battery time may vary due to different using environments Easy Using One-Key Setup – To create a hotspot, just insert a SIM card & press the power button. 32 devices – Supports up to 32 devices simultaneously to share 4G/3G/2G network Compact design – Suitable for travel, business trips, outdoor activities or wherever you may be Storage Wireless Sharing Storage Sharing – Easily share photos, music, videos & more wirelessly across your network Up to 32GB – Equipped with a micro SD card slot for up to 32GB of optional storage ...

Lightning 4G LTE Advanced The latest generation 4G LTE Advanced – Supports 4G LTE advanced network, compatible with 3G/2G network The Faster Connections – Reaches up to 600 Mbps download speed & 50 Mbps upload one, to enjoy HD movies without interruption, download files in seconds, & hold a video chat without dropouts. Dual Band Wi-Fi Dual Band Wi-Fi – Selectable 2.4 G Hz or 5 G Hz dual band Wi-Fi, achieves better network connectivity when you are in network interference. High-Speed Hotspots – Shares 2.4 G Hz 300 Mbps or 5 G Hz 867 Mbps Wi-Fi with up to 32 Wi-Fi devices. 15 Hours Usage 3000m Ah – 3000m Ah battery capacity 15 hours – 15 hours of 4G sharing 720 hours – 720 hours of standby * Actual battery time may vary due to different using environment Easy Using One-Key Setup – To create a hotspot, just insert a SIM card & press the power button. 32 devices – Supports up to 32 devices simultaneously to share 4G/3G/2G network Compact design – Suitable for travel, business trips, outdoor activities or wherever you may be Storage Wireless Sharing Storage Sharing – Easily share photos, music, videos & more wirelessly across your network Up to 32GB – Equipped with a micro SD card slot for up to 32GB of optional storage Specifications Hardware Interface: 1 micro USB (Universal Serial Bus) port for power supply, 1 micro SIM card slot, 1 micro SD card slot Button: Power On/ Off button, Menu button, Reset button Screen Display: Traffic statistics, Wi-Fi status, User numbers, Network type (2G/3G/4G), Signal strength, Internet connection status, Messages, Battery life, Wi-Fi name, Wi-Fi password. External Power Supply: 5V/1A

Dimensions (W x D x H): 4.2 x 2.6 x 0.6 in. (106 x 66 x 16mm) Antenna: Internal antennas

...

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.

...

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1550nm on transferring data & at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data & at 1550nm on receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser

Specification at a full wire speed forwarding rate. It works at 850nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19'system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers.

...

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.

...

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. ...

The MC220L is a media converter designed to convert 1000 Base-SX/LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting & receiving data when adopting multi-mode fiber & 1310nm on both transmitting & receiving data when adopting single-mode. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Link's 19"system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers & 10 kilometers when utilizing single-mode fiber. ...

300 Mbps Wi-Fi Range Extender &
- ; Range Extender mode boosts wireless signal to previously unreachable or hard-to-wire areas
...