With their premium & yet affordable gaming cases, Kolink has firmly established themselves as a leader in the world of respected case manufacturers. The Outline represents an impressive addition to their category of high-performance cases, one that manages to offer as much in terms of design as it does in functionality. The spacious interior fits up to a high-end SSI-EEB motherboard & graphics cards up to 360 mm in length. The cards can also be installed vertically, providing they are dual slot width, using the supplied mount & a PCI-E riser cable (sold separately). It goes without saying that the case offers plenty of room for all your cooling needs: the front supports a radiator up to 360 mm & the roof supports a 240 mm radiator. What really stands out however is the design of its front panel: on the left are functional but attractive air inlets in a checkerboard pattern, on the right is a digitally addressable RGB-LED strip in the form of a narrow rectangle. A pre-installed high-performance 120 mm ARGB fan illuminates the interior of this deceptively large Midi-Tower, meaning that excellent cooling is a given. A tempered glass side panel allows users to enjoy an unobstructed view of the installed hardware. Features Stylish Midi-Tower for motherboards up to SSI-EEB format Tempered glass side panel for a clear view of the interior Digitally addressable RGB-LED strip on the front Option of vertically mounting a dual slot GPU Radiator up to 360 mm on the front, up to 240 mm on the roof A pre-installed 120mm fan on the back with digitally addressable RGB-LEDs Up to six 120 mm fans supported Space for graphics cards up to 360 mm, CPU coolers up to 162 mm I/O Panel with controller for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0, 2x USB (Universal Serial Bus) 2.0 & HD Audio Plenty of Space for Gaming Hardware in the Kolink Outline Even if the outside of the case corresponds to the

Dimensions of a Midi-Tower, the Kolink Outline manages to provide support for motherboards up to the SSI-EEB format. Even graphics cards up to 360 mm will fit, thanks to the amount of room available behind the front panel. Even large CPU coolers up to 162 mm in height will fit with ease. A shroud helpfully conceals the power supply & the HDD cage, in which users can either install two 3.5"- or two 2.5" drives. The rear of the motherboard allows for two 2.5" SSDs to be installed. Those preferring to opt for air cooling will appreciate the number of mounting points present for 120 mm fans. The roof supports two 120 mm fans. It is also equipped with a handy mesh, which allows air to flow through the case, without excess dust thanks to the presence of a dust filter. The result is that this is a large, attractive yet low-maintenance case. If thats still not enough cooling, the front supports up to three 120 mm fans. The slot at the rear is occupied by a 120 mm fan. The pre-installed fan is equipped with digitally addressable RGB-LED lighting. Of course, users are free to install radiators instead of fans if needed, with a 240 mm radiator in the roof & a 360 mm at the front. Tempered Glass & RGB-LEDs to Put Your Hardware On Show The power supply cover provides a tidy look inside the case. Well-placed feedthroughs & cable guides allow for sophisticated cable management. The eye-catching strip on the front of the case is equipped with digitally addressable RGB LEDs, the lighting of which can be controlled via a switch on the I/O panel, or the strip can be connected directly to a motherboard & controlled directly via the board instead. The lighting on the pre-installed fan is also done via a compatible 3-pin connector (5VDG), which can also be controlled via the controller on the I/O panel or via the motherboard. The RGB switch on the I/O panel can also double up as a reset button. In addition to the RGB/ Reset switch, there are one USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 slots as well as 3.5 millimetre sockets for headphones & microphone, a power LED & an HDD LED.

...

The Phalanx Midi-Tower builds on Kolinks case line-up with a stylish new d RGB-LED model complete with a tempered glass side panel & a brushed aluminium front as well as a mesh cut-out. It is defined by a strikingly attractive design that is paired with a multitude of mounting options for fans, water-cooling & storage devices. The interior of the black Phalanx is as capacious as it is stylish. Designer case in black for motherboards up to E-ATX Tempered glass side panel & front with mesh cut-out Four pre-installed digitally addressable 120 mm d RGB fans, 6 possible in total I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out Supports three radiators in 120-mm-, 240- & 280 mm formats 2x 3, 5 or 3x 2, 5" storage mounts Supports graphics cards up to 37 cm long & CPU coolers 16 cm tall ...

The Phalanx V2 Midi-Tower builds on Kolinks case line-up with a stylish new d RGB-LED model complete with a tempered glass side panel & a brushed aluminium front with a mesh cut-out. Four 120mm PWM fans with d RGB illumination are pre-installed. These look particularly stylish set against the dark black of the Phalanx V2s stylish interior. A bundled hub allows for control of the fans speed & illumination, either directly via the motherboard or the (also bundled) remote control. Overall these features & the Phalanx V2s striking & attractive design make for an outstanding case that can be paired with a multitude of mounting options for fans, watercooling & storage devices. Features Designer case in black for motherboards up to E-ATX Tempered glass side panel & front with mesh cut-out Four pre-installed digitally addressable 120 mm PWM Dual Ring d RGB fans, 6 possible in total I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out Supports three radiators in 120-mm-, 240- & 280 mm formats 2x 3.5 or 4x 2.5& Prime; storage mounts Supports graphics cards up to 37 cm long & CPU coolers 16 cm tall ARGB motherboard control using Asus, MSI & Asrock motherboards Included adapter cable to connect ARGB controller to Gigabyte motherboards Four pre-installed PWM Dual Ring d RGB Fans & Tempered Glass Side: Equipped with 7 PCI slots, the chassis of the Kolink Phalanx V2 consists of steel & the left side bears an attractive tempered glass window. This is not just attached with screws; it folds out conveniently thanks to two hinges. The lower section is completely covered by a shroud that helps conceal the PSU & any less-than-elegant cabling. The two 3, 5- or 2, 5& Prime; drive bays are also located here. There is also space for a further 2 x 2.5& Prime; drives on the rear of the case using the predrilled holes. To ensure excellent airflow, the case offers four pre-installed 120mm PWM fans with digitally addressable d RGB-LED lighting, as well as mesh strips in the front of the case. Three fans are installed in the front of the case, meaning they are visible through the mesh at the front. One is located in the back. All fans are connected to the included fan hub/RGB controller. The fans feature 8 LEDs on the inner edge & 16 on the outer edge. This enables them to generate multiple eye-catching & impressive effects. in addition, the d RGB lighting can be controlled using the bundled remote control, the reset switch on the I/O panel, or via the motherboard directly. The top of the case allows for two additional 120 mm- or 140 mm fans. For those who generally prefer larger fans, the case supports the installation of three 140 mm fans at the front in place of 120 mm fans should you prefer. Ingenious Interior Design The cleverly placed openings in the motherboard tray enable some exceptionally clean & tidy cable management. If users wish, the front- & top of the case are both capable of holding a radiator up to 280 mm in size. The back of the case naturally also holds a 120 mm radiator if needed. In order to protect the cases interior & your hard-earned components from dust, the case

Includes:: magnetic fan filters in the top, bottom & front. This makes them a breeze to remove & clean. Graphics cards up to 37 cm in length & CPU coolers up to 16 cm tall will fit this case. Power supplies can be up to 24 cm long. The I/O panel is located on the top of the Kolink Phalanx V2 & provides Audio-In/ Out, a USB (Universal Serial Bus) 3.0 port & two USB (Universal Serial Bus) 2.0 connectors. Also present is a dedicated button to cycle through illumination modes when it is connect to the d RGB hub. (Although it is also possible to connected the hub to the motherboard & either control the illumination via software or the included remote control.) The hub itself offers ten connectors for 6-pin fans with digitally addressable LED lighting. Moreover, there are two connectors for use with LED strips with 5VDG connections in the shape of a 4-pin connector. Also a bundled adapter enables users to connect the controller to Gigabyte motherboards in addition to motherboards from MSI & Asus.

...

The Kolink Pitch offers a professional & clean front panel design with a brushed aluminium effect finish. The Pitch comes with a rear 12cm Blue LED fan installed as standard & supports up to 360mm VGA cards, 174mm CPU Coolers & up to 240mm Radiators on the front panel. Furthermore, the Pitch comes with 2 x USB3.0 ports at standard & an acrylic side window so you can check out your build. The Kolink Pitch is a professional looking chassis with all the features youd expect from a premium case, but without the premium price. Features
- 2 x Front USB (Universal Serial Bus) 3.0 with audio jacks
- Extruded right side panel for cable management & better airflow.
- Brushed aluminium effect front panel
- Bottom PSU placement.
- Tool free SSD, HDD & Optical installation.
- Tinted transparent ABS window for full view of interior.
- 240mm radiator water cooler compatible (front) Specifications
- Model: Pitch Black
- Type: Midi Tower Case
-

Colour: Black with brushed aluminium effect front panel finish
- Case

Material: 0.5mm Steel/ Plastic
- Power Supply Orientation: Bottom ATX
- Motherboard Support: ATX/ Micro-ATX/ Mini-ITX
- External 5.25" Bays: 2
- Internal 2.5" & 3.5" Bays: 8 (total)
- Expansion Slots: 7
- Front Ports: 2 x USB3.0, HD-Audio x 1, Mic x 1,
- Cooling System: Front
- 2 x 120mm Fan (optional), Rear
- 1 x 120mm Blue LED (included), Bottom
- 1 x 120mm Fan (optional, based on PSU length) Top
- 1 x 120/140mm (optional)
- Dimensions: 445 x 190 x 435mm
- Box Dimensions: 490 x 240 x 513
- Clearance: VGA
- 360mm, CPU Cooler
- 174mm, 12/14cm ATX PSU support






























...

Renowned for their innovative & high-performance cases, Kolink has now brought the new Refine Midi-Tower to market, representing a feature-rich gaming case that offers an abundance of space beneath its stylish exterior for all the powerful gaming hardware you could want. The tempered glass side door will allow users to enjoy an unobstructed view of their high-end gaming setup complete with compatibility for E-ATX motherboards. Given the use of tempered glass, aesthetics are important, & a PSU shroud cleverly conceals unsightly cables. The front of the case that consists of brushed aluminium underlines the chic appearance that is also accentuated by the addition of a digitally addressable RGB-LED strip. The lighting can be controlled via a switch on the I/O panel. Alternatively, the strip can also be connected directly to a motherboard & controlled by applicable software. A fine mesh with integrated dust filter on the top ensures proper ventilation. A pre-installed 120mm fan at the rear provides adequate ventilation. Features Stylish Midi-Tower supporting up to E-ATX motherboards Tempered glass side panel with hinges Brushed aluminium front Smart digitally addressable RGB lighting on the front One pre-installed 120mm fan on the rear Up to five 120mm- & four 140mm fans possible Space for graphics cards up to 380mm, CPU coolers up to 160mm tall I/O Panel with controller for RGB-LEDs, 1x USB (Universal Serial Bus) 3.1 Type C, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Kolink Refine: Plenty of Space for Powerful Gaming Hardware Even though the cases

Dimensions correspond to those of a Midi-Tower, the Refine utilises its ingenious design to enable support for E-ATX motherboards. Even graphics cards measuring up to 380 mm will enjoy plenty of space towards the front of the case. CPU coolers measuring up to 160mm in height will also fit with space to spare. The implementation of a smart shroud helps conceal the PSU & HDD cage, in which users are free to install two 3.5"- or two 2.5" drives. To the rear of the motherboard lies a bracket offering support for two more 2.5" SSDs. Those who prefer to opt for air cooling will be pleased to know that there are plenty of mounting points for 120mm fans. The front allows for the installation of two 120mm- or two 140mm fans. The roof allows for either two 120mm- or two 140mm fans. The roof of the case is equipped with a mesh that helps ensure maximum airflow with a minimum of unwanted dust. This is also possible in no small part thanks to the smart use of dust filters, meaning that the cases interior will rarely need special cleaning. A single 120mm occupies a slot at the back of the case. The front of the case supports a 280mm radiator, & of course the rear fan can be replaced with a 120mm radiator if you prefer. Tempered Glass & RGB-LEDs: Get Your Hardware Looking Great Thanks to Kolinks clever choice of locations for the cases cable guides & brackets, users can look forward to a strikingly smart & clean-looking case. The spacious interior can be admired from the outside thanks to the cases use of a tempered glass side door, which of course uses hinges to make opening & closing the case a breeze. A strip of digitally addressable RGB-LEDs is attached to the side of the brushed aluminium front. A switch on the I/O panel is responsible for controlling them, along with their accompanying lighting effects. Alternatively, the strip can also be connected & controlled directly to the mainboard. Then the RGB switch on the I/O panel can also be used as a reset button. In addition to the RGB/ Reset switch, there is also a USB (Universal Serial Bus) 3.1 Type C slot, a USB (Universal Serial Bus) 3.0 slot & two USB (Universal Serial Bus) 2.0 ports, as well as 3.5 mm sockets for headphones & microphone, & finally a power & HDD-LED.

...

Product information: Rocket Aluminium Mini-ITX Case
- Titanium Grey Kolink has developed the stylish & premium SFF (Small Form
...

Behold, the Kolink Rocket Heavy has landed. Built to the same excellent standards as the Kolink Rocket, the Rocket Heavy packs in some serious hardware support, but remains just 15.8L in size. With space for a triple slot vertically mounted 340mm VGA card using the supplied mount & PCI-E riser cable, a 240mm radiator & SFX-L PSUs as standard, the Rocket Heavy is a small chassis with big features. Features Front aluminium panel with hexagon cutouts for ventilation & dust filter Dual Tempered glass side panels for complete view of the interior Designed for Mini-ITX motherboards
- Just 15.8L in size. Triple-Slot Vertical GPU Support with mount & PCI-E 3.1 Riser Cable Support for radiators up to 240mm (max 30mm thickness plus fans) on the aluminium top panel Top mounted 120mm PWM fan I/O Panel with 1 x USB3.2 Type-C, 2x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 340 mm supported, CPU coolers up to 85 mm, SFX-L PSUs Kolink Rocket Heavy
- Enthusiast elegance The Rocket Heavy has been designed to offer a small form factor chassis that still allows for an impressive setup. Both the vented front & top panel are made from aluminium, with an attractive hexagonal cutout design on the front, & a more traditional vented design on the top panel, where a 240mm radiator/AIO with up to 30mm thickness can be installed, alongside standard 120mm fans, using the handy radiator/fan bracket. A 120mm PWM fan is also included on the top panel as standard. Aside from the pre-installed fan, users are also free to install another 120mm fan on the roof, along with a 120mm fan next to the motherboard mounts (a slim 120mm fan is recommended here if using a long graphics card). There is tempered glass on both sides of the case, showcasing your setup from most angles with style. The Kolink Rocket Heavy: Hardware focussed The interior is black powder coated as standard, & features enough room for an impressive setup despite only being 15.8L in size. Theres room for a 340mm graphics card, which is mounted vertically, & can up to triple slot in thickness. The supplied GPU mount & 150mm PCI-E 3.1 Riser Cable means that you can mount your card quickly & efficiently, whilst connecting to your Mini-ITX motherboard is a breeze. CPU Coolers up to 85mm are supported although this case really lends itself to using an AIO setup. In terms of PSU support, the Rocket Heavy supports SFX & SFX-L form factor power supplies as standard. in addition, the I/O panel located at the front possesses a USB (Universal Serial Bus) 3.2 Type-C port, two USB (Universal Serial Bus) 3.0 Type-A ports as well as a pair of USB (Universal Serial Bus) 2.0 ports.

...

The Kolink Satellite is a cube style chassis with impressive amounts of component support, including up to 280mm VGA, ATX PSU up to 220mm (140mm with VGA card over 190mm) & even Micro-ATX boards up to 22.6cm x 18cm. The front I/O is equipped with 2 x USB3.0 ports for high speed transfers, & there is internal space for various drive configurations to suit your requirements. The Kolink Satellite aims to offer impressive functionality with a small case footprint & competitive price. It delivers on all counts. Features
- 2 x USB3.0 on the front panel
- Support for Micro-ATX Motherboards (Up to 22.6cm x 18cm)
- Support for 280mm VGA cards
- Small footprint
- Space for 2 x 3.5" + 2 x 2.5" or 3 x 3.5" or 4 x 2.5" HDDs
- Black Interior with 12cm rear fan installed. Specifications
- Model: Satellite
- Type: Micro-ATX Cube Case
-

Colour: Black
- Case

Material: 0.5mm Steel/ Plastic
- Power Supply Orientation: Front
- Motherboard Support: Micro-ATX (Up to 22.6cm x 18cm)/ Mini-ITX
- External 5.25" Bays:
- External 3.5" Bays: 0
- Internal 3.5" Bays: 3 (dependant on configuration)
- Internal 2.5" Bays: 4 (dependant on configuration)
- Expansion Slots: 2
- Front Ports: 2 x USB3.0 (with USB2.0 convertor), HD-Audio x 1, Mic x 1
- Cooling System: Rear
- 1 x 120mm (included)
- Dimensions: 260 x 190 x 280mm
- Clearance: VGA
- 280mm, CPU Cooler 165mm, PSU
- 220mm (with VGA card under 190mm), 140mm (with VGA card over 190mm)



























...

The Kolink Satellite Plus is a cube style chassis with an aluminium exterior plus impressive amounts of component support, including up to 280mm VGA, ATX PSU up to 220mm (140mm with VGA card over 190mm) & even Micro-ATX boards up to 22.6cm x 18cm. The front I/O is equipped with 2 x USB3.0 ports for high speed transfers, & there is internal space for various drive configurations to suit your requirements. The Kolink Satellite Plus aims to offer impressive functionality with a small case footprint, an impressive aluminium exterior & competitive price. It delivers on all counts. Features
- 2 x USB3.0 on the front panel
- Support for Micro-ATX Motherboards (Up to 22.6cm x 18cm)
- Support for 280mm VGA cards
- Small footprint
- Aluminium exterior for a professional & premium feel
- Space for 2 x 3.5" + 2 x 2.5" or 3 x 3.5" or 4 x 2.5" HDDs
- Black Interior with 12cm rear fan installed. Specifications
- Model: Satellite Plus
- Type: Micro-ATX Cube Case
-

Colour: Black
-

Material: Aluminium (Exterior), Steel (Interior)
- Power Supply Orientation: Front
- Motherboard Support: Micro-ATX (Up to 22.6cm x 18cm)/ Mini-ITX
- External 5.25" Bays:
- External 3.5" Bays: 0
- Internal 3.5" Bays: 3 (dependant on configuration)
- Internal 2.5" Bays: 4 (dependant on configuration)
- Expansion Slots: 2
- Front Ports: 2 x USB3.0 (with USB2.0 convertor), HD-Audio x 1, Mic x 1
- Cooling System: Rear
- 1 x 120mm (included)
- Dimensions: 260 x 190 x 280mm
- Clearance: VGA
- 280mm, CPU Cooler 165mm, PSU
- 220mm (with VGA card under 190mm), 140mm (with VGA card over 190mm)




























...

The Kolink Stronghold Barricade Mid-Tower Case sports user-friendly features & the iconic Kolink hexagonal cut-out mesh design. The front panel is a sleek, flat metal, whilst the rest of the case is expertly ventilated making the natural airflow outstanding. Enhancing this, this chassis is equipped with two Kolink Classic PWM fans with brackets to support more. With its hinged tempered glass panel & removable metal panels, hardware installation has never been easier. THE FEATURES OF KOLINK STRONGHOLD BARRICADE MID-TOWER CASE AT A GLANCE: Steel frame featuring mesh metal & plastic panels with a hinged tempered glass side panel Features the iconic Kolink hexagonal cut outs on gunmetal grey backdrop Accommodates up to an E-ATX motherboard, 330mm long GPU, & 165mm CPU cooler Ventilated PSU shroud hosts power supply up to 190mm long Internal cable management & side-placed I/O panel Primed for Ai O coolers with multiple radiators Comprehensive storage solution with four drive bays SCREWLESS DESIGN A core tenant of the Kolink Stronghold Barricade Mid-Tower Case is its user-friendly design. With no screws included, all the mesh metal & plastic panels are removable, including the top, & the tempered glass panel is hinged. Easy to open utilising the magnetic pull tab, the glass panel opens fully granting you better access to the case’s interior. By removing the metal panels, this accessibility is increased. Utilising the mid-tower form factor its full extent, the Kolink Stronghold Barricade can accommodate up to an E-ATX motherboard & sports seven expansion slots. For the absolute best in gaming, this case can host a graphics card up to 330mm long, which covers most of the models currently available. in addition, there is clearance for a CPU cooler up to 165mm tall. Thanks to its carefully curated design, the Kolink Stronghold Barricade can support all your high-end gaming hardware. THERMAL PERFORMANCE With the inclusion of Kolink Classic PWM fans, the Kolink Stronghold Barricade can effectively & efficiently help keep your system running cool. Both fans are 120mm in diameter, with one placed on the rear & the other centrally on the front panel. They help to boost the natural airflow from the mesh panel, thanks to their seven curved blades & speeds up to 1500RPM. Equipped with a hydraulic bearing, they run quietly with high reliability. Supporting this thermal performance further, there are three places to mount radiators. There is capacity for up to a 360mm mounted to the front, up to a 240mm on the top, & up to a 120mm radiator at the rear. Thanks to the spacious layout, the Kolink Stronghold Barricade is primed for use with Ai O cooling systems & can accommodate multiple radiators at once. GUNMETAL GREY Located at the bottom of the Kolink Stronghold Barricade Mid-Tower Case is the ventilated PSU shroud, capable of holding a power supply up to 190mm long. Next to this is a storage drive bay, that holds two 2.5” SSDs & two 2.5” or 3.5” HDDs. This grants amazing flexibility when it comes to your storage solution, allowing you to maximise capacity & speed potential. Completing the sleek & classic look, the Kolink Stronghold Barricade is finished in gunmetal grey with a flat metal front panel. The top face of the chassis features the I/O panel, to the side of the mesh design, to facilitate better cable management. Including a USB (Universal Serial Bus) 3.1, two USB (Universal Serial Bus) 2.0 ports, & one HD audio jack, this I/O panel features everything you need to connect your peripherals. ...