United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Kolink Stronghold Barricade Midi Tower Case - Gunmetal Grey
The Kolink Stronghold Barricade Mid-Tower Case sports user-friendly features and the iconic Kolink hexagonal cut-out mesh design. The front panel is a sleek, flat metal, whilst the rest of the case is expertly ventilated making the natural airflow outstanding. Enhancing this, this chassis is equipped with two Kolink Classic PWM fans with brackets to support more. With its hinged tempered glass panel and removable metal panels, hardware installation has never been easier. THE FEATURES OF KOLINK STRONGHOLD BARRICADE MID-TOWER CASE AT A GLANCE: Steel frame featuring mesh metal and plastic panels with a hinged tempered glass side panel Features the iconic Kolink hexagonal cut outs on gunmetal grey backdrop Accommodates up to an E-ATX motherboard, 330mm long GPU, and 165mm CPU cooler
Ventilated PSU shroud hosts power supply up to 190mm long Internal cable management and side-placed I/O panel Primed for AiO coolers with multiple radiators Comprehensive storage solution with four drive bays SCREWLESS DESIGN A core tenant of the Kolink Stronghold Barricade Mid-Tower Case is its user-friendly design. With no screws included, all the mesh metal and plastic panels are removable, including the top, and the tempered glass panel is hinged. Easy to open utilising the magnetic pull tab, the glass panel opens fully granting you better access to the case’s interior. By removing the metal panels, this accessibility is increased. Utilising the mid-tower form factor its full extent, the Kolink Stronghold Barricade can accommodate up to an E-ATX motherboard and sports seven
expansion slots. For the absolute best in gaming, this case can host a graphics card up to 330mm long, which covers most of the models currently available. Additionally, there is clearance for a CPU cooler up to 165mm tall. Thanks to its carefully curated design, the Kolink Stronghold Barricade can support all your high-end gaming hardware. THERMAL PERFORMANCE With the inclusion of Kolink Classic PWM fans, the Kolink Stronghold Barricade can effectively and efficiently help keep your system running cool. Both fans are 120mm in diameter, with one placed on the rear and the other centrally on the front panel. They help to boost the natural airflow from the mesh panel, thanks to their seven curved blades and speeds up to 1500RPM. Equipped with a hydraulic bearing, they run quietly
with high reliability. Supporting this thermal performance further, there are three places to mount radiators. There is capacity for up to a 360mm mounted to the front, up to a 240mm on the top, and up to a 120mm radiator at the rear. Thanks to the spacious layout, the Kolink Stronghold Barricade is primed for use with AiO cooling systems and can accommodate multiple radiators at once. GUNMETAL GREY Located at the bottom of the Kolink Stronghold Barricade Mid-Tower Case is the ventilated PSU shroud, capable of holding a power supply up to 190mm long. Next to this is a storage drive bay, that holds two 2.5” SSDs and two 2.5” or 3.5” HDDs. This grants amazing flexibility when it comes to your storage solution, allowing you to maximise capacity and speed potential.
Completing the sleek and classic look, the Kolink Stronghold Barricade is finished in gunmetal grey with a flat metal front panel. The top face of the chassis features the I/O panel, to the side of the mesh design, to facilitate better cable management. Including a USB 3.1, two USB 2.0 ports, and one HD audio jack, this I/O panel features everything you need to connect your peripherals.
Ventilated PSU shroud hosts power supply up to 190mm long Internal cable management and side-placed I/O panel Primed for AiO coolers with multiple radiators Comprehensive storage solution with four drive bays SCREWLESS DESIGN A core tenant of the Kolink Stronghold Barricade Mid-Tower Case is its user-friendly design. With no screws included, all the mesh metal and plastic panels are removable, including the top, and the tempered glass panel is hinged. Easy to open utilising the magnetic pull tab, the glass panel opens fully granting you better access to the case’s interior. By removing the metal panels, this accessibility is increased. Utilising the mid-tower form factor its full extent, the Kolink Stronghold Barricade can accommodate up to an E-ATX motherboard and sports seven
expansion slots. For the absolute best in gaming, this case can host a graphics card up to 330mm long, which covers most of the models currently available. Additionally, there is clearance for a CPU cooler up to 165mm tall. Thanks to its carefully curated design, the Kolink Stronghold Barricade can support all your high-end gaming hardware. THERMAL PERFORMANCE With the inclusion of Kolink Classic PWM fans, the Kolink Stronghold Barricade can effectively and efficiently help keep your system running cool. Both fans are 120mm in diameter, with one placed on the rear and the other centrally on the front panel. They help to boost the natural airflow from the mesh panel, thanks to their seven curved blades and speeds up to 1500RPM. Equipped with a hydraulic bearing, they run quietly
with high reliability. Supporting this thermal performance further, there are three places to mount radiators. There is capacity for up to a 360mm mounted to the front, up to a 240mm on the top, and up to a 120mm radiator at the rear. Thanks to the spacious layout, the Kolink Stronghold Barricade is primed for use with AiO cooling systems and can accommodate multiple radiators at once. GUNMETAL GREY Located at the bottom of the Kolink Stronghold Barricade Mid-Tower Case is the ventilated PSU shroud, capable of holding a power supply up to 190mm long. Next to this is a storage drive bay, that holds two 2.5” SSDs and two 2.5” or 3.5” HDDs. This grants amazing flexibility when it comes to your storage solution, allowing you to maximise capacity and speed potential.
Completing the sleek and classic look, the Kolink Stronghold Barricade is finished in gunmetal grey with a flat metal front panel. The top face of the chassis features the I/O panel, to the side of the mesh design, to facilitate better cable management. Including a USB 3.1, two USB 2.0 ports, and one HD audio jack, this I/O panel features everything you need to connect your peripherals.
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark