Kodak Z950IS Easyshare 12 mp 10 x Optical Zoom Digital Camera Black Youve been wishing your camera could take better pictures. Good news. The Z950 gives you pro-like performance thats easy to use, so you can get outstanding shots in challenging & creative scenarios. General Product Type: Digital camera
- compact

Width: 11 cm

Depth: 3.6 cm

Height: 6.7 cm Weight: 233g Main Features Resolution: 12.2 Megapixel Colour Support: Colour Optical Sensor: Type CCD Total Pixels: 12, 700, 000 pixels Effective Sensor Resolution: 12, 200, 000 pixels Optical Sensor

Size: 1/2.3" Light Sensitivity: ISO 100, ISO 800, ISO 400, ISO 200, ISO 1600, ISO 3200 (3 Mpix) Digital Zoom: 5x Shooting Modes: Frame movie mode Shooting Programs: Landscape, portrait mode, text, close-up, museum, backlight, night portrait, self-portrait, Children, fireworks, night landscape, panorama assist, flower, sports mode, sunset, candle, beach, snow Special Effects: Black & White, Sepia, high colour, low colour Image Stabiliser: Optical Max Shutter Speed: 1/1250 sec Min Shutter Speed: 16 sec Exposure Metering: Multi-segment, centre-weighted, spot Exposure Modes: Programme, automatic, manual, aperture-priority, shutter-priority Exposure Compensation: ±2 EV range, in 1/3 EV steps Auto Exposure Bracketing: 3 steps in 1/3 EV step Face Detection: Built-in White Balance: Automatic, presets White Balance: Presets Fluorescent, tungsten light, daylight, shade Digital Video Format: Quick Time Still Image Format: JPEG Video Capture: Quick Time
- 640 x 480
- 30 fps ¦ Quick Time
- 320 x 240
- 30 fps ¦ Quick Time
- 1280 x 720
- 30 fps Memory / Storage Supported Flash: Memory SD Memory Card, SDHC Memory Card Integrated Memory: 32 MB Image Storage: JPEG 4000 x 3000 ¦ JPEG 4000 x 2666 ¦ JPEG 4000 x 2250 ¦ JPEG 2888 x 2160 ¦ JPEG 2048 x 1536 ¦ JPEG 1800 x 1200 ¦ JPEG 1920 x 1080 ¦ JPEG 1280 x 960 Camera Flash Camera Flash: Built-in flash Flash Modes: Fill-in mode, auto mode, flash OFF mode, red-eye reduction Red Eye: Reduction Built-in Effective: Flash Range 5.4 m

Features: AF illuminator, flash +/- compensation Lens System Type: Zoom lens
- f/3.5-4.8 Focal Length Equivalent: to 35mm Camera 35
- 350mm Focus Adjustment: Automatic Auto Focus: TTL contrast detection Min Focus: Range 50 cm Macro Focus Range: 0.12-1.3m Lens Aperture: F/3.5-4.8 Optical Zoom: 10x Zoom Adjustment: Motorised drive Additional Features Self Timer: Built-in Self Timer: Delay 10 sec, 2sec Additional

Features: Audio recording, direct print, USB (Universal Serial Bus) 2.0 compatibility, auto power save, date/time stamp, display brightness control, sharpness control, camera orientation detection, Pict Bridge support, cropping an image, Scene Detection Technology, Dynamic Range Optimizer, face detection, You Tube capture mode Display Type: LCD display
- TFT active matrix
- 3"
- colour Display Form Factor: Built-in Display Format: 230, 000 pixels Microphone Type: Microphone
- built-in Microphone Technology: Electret condenser Microphone Operation Mode: Mono Connections Connector Type: 1 x USB (Universal Serial Bus) Expansion Slot (s): 1 x SD Memory Card Software Software: Drivers & Utilities, Kodak Easy Share System Requirements for PC Connection Operating System Support: MS Windows XP SP2 or later, Apple Mac OS X 10.4 or later, MS Windows Vista Peripheral Devices: USB (Universal Serial Bus) port, SVGA monitor, CD-ROM Drive Miscellaneous Included Accessories: Wrist strap Cables Included: USB (Universal Serial Bus) cable Power Power Device: Power adapter
- external Supported Battery: Kodak KLIC 7003 Supported Battery: Details 1 x Li-ion rechargeable battery (included)

























...

Dot is a stylish & durable lens that lets you shoot 360 degree panoramic videos. Kogetos free Looker app makes shooting & sharing your. Dotspots a snap. Share the world around you with Dot
- the pocket-friendly 360 degree panoramic video attachment for iPhone 4 & 4S. Using the free. Looker app available in the App Store & on i Tunes, you can film & instantly share 360 degree panoramic video on Facebook, Twitter, & other social platforms. Snap the Dot onto your iPhone 4 & easily record fully immersive 360 degree videos. Upload your videos & share the world around you with everyone around you. Shoot 360 Degree Panoramic Video from the. Palm of Your Hand Snap Dot onto your iPhone 4, download the free. Looker app, & instantly record fully immersive 360 degree videos right on your iPhone. Going to a concert? You can record the show & the audience. Heading out on a road trip? Leave Dot on the dashboard & record your highway adventures. No matter what youre recording, Dot sees everything. Share 360 Degree Panoramic Video with Friends. Watch your videos on your iPhone 4 by swiping your screen to virtually spin around, or switch modes & view them in panoramic widescreen. Looker means that you can instantly share your 360 degree world with friends & family (via Facebook, Twitter, or upload to " Dot Spots" on kogeto com) right from the palm of your h&. How Does It Work? Kogetos compact & durable i CONIC lens works with the iPhone 4s HD video camera to capture full 360 degree video -all at once- without stitching frames together. The unique catadioptric optical system is fully AR-coated for excellent colour fidelity in all environments. Dot is a lightweight attachment that doesnt require batteries or external power. Whats in the Box? Dot panoramic attachment for iPhone 4, microfiber pouch that doubles as a lens cloth, user manual, warranty. Box Contains. Kogetos device.
...

The HEPA Jet has an ergonomic bulb that is made from medical grade PVC that is comfortable & hypoallergenic. It provides comfort & power. The one-way check valves in the nozzle & filter make sure air flows only in one direction. Dust & humidity pose the greatest challenge to keeping the sensor clean. The Koh Hepa Jet blasts unwanted dust off the sensor without introducing dust or humidity into the camera chamber. The replaceable HEPA filter removes humidity & 99.97% of air particles. The respirator grade filter is made from antimicrobial fibreglass filaments that do not form mould, bacteria, or fungus. The pleated sheets create an enormous surface area so that air flows fast with low resistance, giving the HEPA JET quick bounce. Unlike single plane flat disc filters, pleated HEPA filters have longevity. Under normal use, you may never need to replace the filter. ...

With standard duplex printing, the magicolor 3730DN reduces paper consumption & helps to save printing costs. Toner save mode uses less colour toner to print images & illustrations while text remains sharp & clearly readable – toner cartridges last longer & need to be replaced less frequently. Reduced energy consumption thanks to efficient sleep mode & lower fusing temperature due to Simitri HD polymerised toner. Network printing with remarkable 24 ppm in colour & monochrome & the machine is small in size & highly compact with low height – in other words: your ideal all-round desktop printer. The printer also comes with Automatic double sided printing means that you can print on both sides of the paper. * Special Offer Available: 3 year warranty upgrade Buy today & upgrade from a 1 year to a 3 year warranty with Konica Minolta! A valid claim form must be received for each magicolor or pagepro printer within 90 days of purchase. Terms & Conditions apply. Click for Details ...

When high current, reliability & stability are important, the tried & tested Kokam-batteries are just the right batteries. We have a large collection of the most different battery types for you so that you can select the right battery for your micro-helis, motor sails, flight models or also for the model cars. ...

Renowned for their innovative & high-performance contributions to the world of PC cases, Kolink has created the Balance Midi-Tower as a feature-rich gaming case. This case may have a stunning exterior, but behind this facade lies a lot of space for powerful gaming hardware aswell. All this gaming goodness can be admired through the tempered glass side panel, & as it supports motherboards up to E-ATX in form factor, there will be plenty to look at. A thoughtfully included PSU shroud also helps users stash away unsightly cables. The front of the case, with its fine mesh & air vents, helps ensure not only good airflow, it also helps accentuate the digitally addressable RGB-LED strip & the look of the case as a whole. A switch on the I/O panel allows the lighting to be controlled. Alternatively, the strip can be connected directly to the motherboard & controlled that way instead. The overall ventilation of the case is also helped by the presence of a fine mesh with integrated dust filter on the top. A pre-installed 120 mm fan is also equipped with d ARGB lighting. Features Stylish Midi-Tower for motherboards up to E-ATX format Tempered glass side panel for an unobstructed view of the interior Front with fine-mesh ventilation grille Attractive d ARGB lighting on the front A pre-installed 120 mm fan with d ARGB lighting at the rear Up to five 120 mm- & four 140 mm fans possible in total Space for graphics cards up to 370 mm tall, CPU coolers up to 162 mm I/O Panel with controller for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Kolink Balance: Plenty of Space for Powerful Gaming Hardware Even though the outer

Dimensions of the case are those of a Midi-Tower, the Balance uses its clever design in such a way as to make space for even an E-ATX board if necessary. Graphics cards up to 370 mm in length will fit comfortably, & even tall CPU coolers up to 162 mm in height will fit. One of the highlights of the case is the fact that GPUs can be mounted vertically using a PCI-E riser cable (sold separately)
- meaning that users are really free to make their system stand out from the crowd. A PSU shroud conceals the power supply & the HDD cage, where two 3.5"- or two 2.5" drives can be installed. Two more 2.5" SSDs can be installed to the rear of the motherboard. As for those who prefer to opt for air cooling, there are more than enough slots for 120 mm fans. The front allows for three 120 mm- or two 140 mm fans to be installed. The roof supports either two 120 mm or two 140 mm fans. The cover is equipped with a mesh that allows the system to benefit from a plentiful supply of fresh air
- & this is combined with a dust filter to ensure the interior doesnt need frequent cleaning either. The rear of the case supports a high-performance 120 mm fan, a 360 mm or 280 mm radiator can be installed in the front, & a further 280 mm radiator can be installed in the roof if needed. The pre-installed 120 mm fan can be replaced with an identically-sized radiator. Tempered Glass & RGB-LEDs: Showcase Your System Thanks to the clever locations of the cable guides & brackets, users will enjoy the various benefits of smart cable management. All the more important as so much of the case is on show, thanks to the use of a tempered glass side panel. In the centre of the front of the case, users will find a strip with d ARGB-LEDs. These LEDs & their effects can be controlled via a switch situated on the I/O panel. Alternatively, the strip can be connected directly to a compatible ARGB motherboard & controlled that way instead. Aside from the RGB button, there are also power- & reset buttons alongside a USB (Universal Serial Bus) 3.0 port, two USB (Universal Serial Bus) 2.0 ports, Power/HDD-LEDs, & a 3.5 mm jack for headphones & microphones.



...

Noble look & spacious interior: The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior. Beneath the tempered glass side, the Midi-Tower is decorated with an addressable RGB-LED strip. Its colours shine out from behind an opaque acrylic glass strip. The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs. The lighting can be controlled via a switch on the I/O panel, or by compatible addressable RGB motherboards using the 3-Pin connector provided. Furthermore, the spacious interior is more than capable of supporting lot of powerful hardware. A fine mesh with integrated dust filter on the top is also provided, ensuring your components are supplied with fresh air as well as kept dust-free. Features Stylish Midi-Tower in White for motherboards up to E-ATX format White Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long, CPU cooler up to 160 mm tall I/O panel with control for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Support for up to 280mm radiators on the top panel The Kolink Bastion: A Spacious Case for Gaming Hardware Even if the outer

Dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit & the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard. Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans. Tempered Glass & RGB-LEDs to Set your Hardware Apart! Even the motherboard tray is an eye-catcher in this case. Instead of boring squares & rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync. The pre-installed fans lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/ Reset switch, there are one USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 connections as well as a 3.5 millimetre jack for headphones & microphones, alongside a power LED & an HDD LED.

...

Noble look & spacious interior: The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior. Beneath the tempered glass side, the Midi-Tower is decorated with an addressable RGB-LED strip. Its colours shine out from behind an opaque acrylic glass strip. The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs. The lighting can be controlled via a switch on the I/O panel, or by compatible addressable RGB motherboards using the 3-Pin connector provided. Furthermore, the spacious interior is more than capable of supporting lot of powerful hardware. A fine mesh with integrated dust filter on the top is also provided, ensuring your components are supplied with fresh air as well as kept dust-free. A STYLISH HIGH-END CASE FROM KOLINK: THE BASTION Stylish Midi-Tower for motherboards up to E-ATX format Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long, CPU cooler up to 160 mm tall I/O panel with control for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Support for up to 280mm radiators on the top panel THE KOLINK BASTION: A SPACIOUS CASE FOR GAMING HARDWARE Even if the outer

Dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit & the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard. Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans. TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case. Instead of boring squares & rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync. The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/ Reset switch, there are one USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 connections as well as a 3.5 millimetre jack for headphones & microphones, alongside a power LED & an HDD LED. Technical

Details:

Dimensions (W x H x D): 432 x 205 x 490 mm

Material: Steel, tempered glass, plastic Weight: approx. 5.9kg
Colour: Black Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX Total possible fans: 2x 120/140 mm (cover) 2x 120 mm (power supply cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm Rear side Radiator mountings: 1x 240/280 mm (cover) 1x 240 mm (power supply cover) 1x 120 mm (rear) Filter: Cover








...

Back with a THICC vengeance, the Big Chungus UNIT Edition improves on various aspects of the original case, including upgrading all 5 fans to dual ring ARGB PWM versions! Added to that, the stand is now anodized black & comes pre-attached out of the box. Showing off your hardware from every side, the case is ideal for showing off a custom water cooling loop
- & the fact that the huge case provides plenty of room doesnt hurt either. The materials used are first-class: The two sides, the front & even the lid are made from subtly tinted tempered glass. The base with the I/O panel is made from aluminium. The frame utilizes 1.0mm thick black powder coated steel. Features Extravagant showcase for motherboards up to E-ATX Both side parts, front & lid made from tinted tempered glass Base made from high-quality black anodized aluminium Five pre-installed 120mm PWM fans with digitally addressable RGB-LEDs Two pre-installed ARGB strips ARGB-LED PWM controller with infrared remote control Alternative RGB control via motherboard using 3-pin 5VDG connector Graphics cards up to 335 millimeters, CPU cooler up to 175 mm Supports 2 x 2.5"/3.5" + 2 x 2.5" drives I/O Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 1x USB (Universal Serial Bus) 3.1, 1x USB (Universal Serial Bus) 2.0, Audio In/ Out Big Chungus UNIT Edition: The Perfect Way to Show off Hardware Thanks to the tinted tempered glass panels on both sides, as well as on the lid & on the front, Big Chungus is the perfect place for some powerful gaming hardware. A motherboard up to E-ATX form factor will fit in this spacious frame. Graphics cards up to a length of 335 millimetres can be installed, with CPU coolers up to 175 millimetres high. Thanks to the large cut-outs in the frame, the case remains remarkably light despite its size. This also ensures an optimal air supply from the outside. The angular case sits slightly angled upwards on a distinctive base, which is also made from black anodized aluminium. The I/O panel offers excellent connectivity, with a modern USB (Universal Serial Bus) 3.1 Type C port as well as a USB (Universal Serial Bus) 3.1 & an USB (Universal Serial Bus) 2.0 port. With this variety of connections, almost all USB (Universal Serial Bus) peripherals can be used directly on the case, whether keyboard & mouse, external USB (Universal Serial Bus) data carriers or even smartphones, which can even be charged there. Ample Space for Air & Water Cooling Five 120 mm PWM fans with digitally addressable dual ring RGB-LEDs are already pre-installed. Four of them adorn the front & can be admired via the tinted tempered glass. A further 120 mm PWM fan, also with digitally addressable RGB-LEDs, is integrated into the single fan slot on the rear. Two additional 120 mm fans can be installed under the lid & three 120 mm fans can be installed in the bottom. Accordingly, the fans can also be replaced by radiators. 360 mm radiators can be mounted on the base & front, & there is room for a 240 radiator in the roof. The ATX power supply unit (available separately) is mounted beneath the three fan slots on the base & is hidden by the base. It can be up to 220 millimetres in length. One feature that stands out visually is the versatile PWM fan & ARGB controller, which is mounted behind the motherboard tray. The five pre-installed fans are connected to it. The two ARGB-LED strips are connected at the side. in addition, there are 5 more slots available for other 6-Pin fans if needed. The ARGB-LED lighting is controlled via an included infrared remote control. The controller/hub can also be connected to a motherboard via a cable, & the ARGB LEDs can then be synchronised with other ARGB components. The fans are also PWM controlled via the cable connecting to the controller.
...

CASTLE With its minimalist exterior, spacious interior and tempered glass side door, the Castle Midi-Tower from Kolink certainly leaves a lasting impression. The reserved exterior goes a long way to making the hardware you do choose to install look its very best. Designed for excellent airflow, the case supports motherboards up to ATX in form factor along with graphics cards up to 350 mm long - enough space for the powerful gaming hardware you need. Despite the robust tempered glass side, the Kolink Castle still only weighs in at just 5, 1 Kg. And because the side is easy to open, the Castle is perfect for people who appreciate having quick & easy access to the innards of their PC when it comes to tweaks & upgrades. The Features of the Kolink Castle Midi-Tower at a Glance Ascetic, minimalist design in black that supports motherboards up to ATX Tempered glass side: 4 mm thick 2x Pre-installed 120 mm fans, 6 possible in total I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out, LEDs for power and HDD Support for radiators up to 240 mm in front & in roof 2x 3, 5/2, 5“ Drive slots, 4x slots for 2, 5” drives Graphics cards up to 35 cm long & CPU coolers 16 cm high supported Tempered Glass Side & Two Pre-Installed Fans The robust chassis consists of 1 mm thick SECC steel and is equipped with a 4-mm-thick tempered glass side door with a plastic brushed aluminium look front. The whole interior is coated in black & also

Includes:: a PSU shroud to help give the system an exceptionally clean aesthetic. Beneath this you will find a pre-installed drive cage with brackets for three 3, 5- or 2, 5” drives that leaves plenty of space for the power supply. On the PSU shroud, as in front of the motherboard tray, there are a total of four slots for 2, 5” drives. In order to keep your gaming hardware kept well-supplied with fresh air, two of six possible 120 mm fans, both in black, come included with the case. One is located in the bottom of three total slots located behind the front panel, the second is located in the single slot at the back. The roof of the case supports two further 120 mm fans if required. The front of the case also supports two 140 mm fans. Dust Filters Keep the Kolink Castle Clean The motherboard tray & the PSU cover offer multiple openings for excellent cable management options. A 240 mm radiator can fit in the roof & the front of the Castle case. With fine-mesh dust filters installed on the air inlets in the roof & on the bottoms of the case, users will appreciate the extra degree of dust protection this allows. These dust filters have a honeycomb design & are magnetic, adding to the overall convenience. Graphics cards up to 35 cm long are supported as well as CPU coolers up to 16 cm in height. in addition, the I/O panel on the front

Includes::, in addition to two USB 2.0 ports, a single USB 3.0 Type-A port. A cut-out for a switch to control the RGB lighting is available, this however does not come included with the case and is available for purchase separately. Power & drive access LEDs are included.



...