ADVANCED FEATURES Client Match technology eliminates sticky clients by continuously gathering session performance metrics & utilizing this data to steer mobile devices to the best AP & radio, even as users roam & RF conditions change. ARM technology delivers best-in-class RF management, including automatic transmit power & channel control with auto coverage-hole correction. Zero-touch provisioning as well as automated firmware upgrades & inventory management with the cloud-based Aruba Activate service. Spectrum analyzer remotely scans the 2.4-GHz & 5-GHz radio bands to identify sources of RF interference. Security With an Open DNS service subscription, Aruba Instant RAPs delivers integrated web filtering, malware & botnet protection to every device connected to the WLAN Integrated Trusted Platform Module (TPM) for secure storage of credentials & keys Secure Jack-capable for secure tunneling of wired Ethernet traffic VPN configuration functionality enables the Instant AP to create a single VPN tunnel to an Aruba Mobility Controller in the data center. The Mobility Controller acts solely as a VPN end-point & does not supply the Instant AP with any configuration. WIRELESS RADIO SPECIFICATIONS AP type: Dual radio, dual-band 802.11n indoor Software-configurable dual radio supports 2.4 GHz & 5 GHz 2x 2 MIMO with two spatial streams & up to 300 Mbps wireless data rate per radio Supported frequency bands (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.875 GHz Available channels: Managed by Aruba Instant or Mobility Controller, depending upon the configured regulatory domain Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n: 2x 2 MIMO with two spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM Transmit power: Configurable in increments of 0.5 d Bm Maximum (aggregate) transmit power (limited by local regulatory requirements): 2.4-GHz band: +21 d Bm 5-GHz band: +21 d Bm Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for enhanced receiver performance Cyclic delay diversity (CDD) for enhanced downlink RF performance Short guard interval for 20-MHz & 40-MHz channels Space-Time Block Coding (STBC) for increased range & enhanced reception Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15) 802.11n high-throughput (HT) support: HT 20/40 802.11n packet aggregation: A-MPDU, A-MSDU INTERFACES Network: ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed & MDI/MDX ENET1-4 (local): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed & MDI/MDX One port for DC power connector One USB (Universal Serial Bus) 2.0 port (Type A connector) One serial console interface (RJ-45) Visual indicators (LEDs): Power/system status Ethernet link status (2x) Radio status (2x) Kensington security slot Reset button POWER Supported power sources: 802.3af (Po E) or 802.3at (Po E+) on uplink Ethernet port Note: When using Po E, the USB (Universal Serial Bus) port will be enabled only when an 802.3at-compliant source is used 12 volts from external power adapter (sold separately) Maximum power consumption: Without USB (Universal Serial Bus) device connected: 12.5 watts With USB (Universal Serial Bus) device: 15 watts ...

The multifunctional Aruba RAP-100 series delivers secure 802.11n wireless & wired networking to SMBs & access to corporate resources from branch & home offices. With unmatched deployment flexibility, the RAP-100 series can operate in Aruba Instant mode controlled by the Air Wave management platform or in controller-managed mode where all network services are centralized by Aruba Mobility Controllers. In Aruba Instant mode, traffic is locally bridged but it still provides the flexibility of secure tunneling to Mobility Controllers. Client Match technology eliminates sticky clients by continuously gathering session performance metrics & utilizing this data to steer mobile devices to the best AP & radio, even as users roam & RF conditions change. ARM technology delivers great RF management, including automatic transmit power & channel control with auto coverage-hole correction. ...

ADVANCED FEATURES Client Match technology eliminates sticky clients by continuously gathering session performance metrics & utilizing this data to steer mobile devices to the best AP & radio, even as users roam & RF conditions change. ARM technology delivers best-in-class RF management, including automatic transmit power & channel control with auto coverage-hole correction. Zero-touch provisioning as well as automated firmware upgrades & inventory management with the cloud-based Aruba Activate service. Spectrum analyzer remotely scans the 2.4-GHz & 5-GHz radio bands to identify sources of RF interference. Security With an Open DNS service subscription, Aruba Instant RAPs delivers integrated web filtering, malware & botnet protection to every device connected to the WLAN Integrated Trusted Platform Module (TPM) for secure storage of credentials & keys Secure Jack-capable for secure tunneling of wired Ethernet traffic VPN configuration functionality enables the Instant AP to create a single VPN tunnel to an Aruba Mobility Controller in the data center. The Mobility Controller acts solely as a VPN end-point & does not supply the Instant AP with any configuration. WIRELESS RADIO SPECIFICATIONS AP type: Dual radio, dual-band 802.11n indoor Software-configurable dual radio supports 2.4 GHz & 5 GHz 2x 2 MIMO with two spatial streams & up to 300 Mbps wireless data rate per radio Supported frequency bands (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.875 GHz Available channels: Managed by Aruba Instant or Mobility Controller, depending upon the configured regulatory domain Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n: 2x 2 MIMO with two spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM Transmit power: Configurable in increments of 0.5 d Bm Maximum (aggregate) transmit power (limited by local regulatory requirements): 2.4-GHz band: +21 d Bm 5-GHz band: +21 d Bm Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for enhanced receiver performance Cyclic delay diversity (CDD) for enhanced downlink RF performance Short guard interval for 20-MHz & 40-MHz channels Space-Time Block Coding (STBC) for increased range & enhanced reception Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15) 802.11n high-throughput (HT) support: HT 20/40 802.11n packet aggregation: A-MPDU, A-MSDU INTERFACES Network: ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed & MDI/MDX ENET1-4 (local): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed & MDI/MDX One port for DC power connector One USB (Universal Serial Bus) 2.0 port (Type A connector) One serial console interface (RJ-45) Visual indicators (LEDs): Power/system status Ethernet link status (2x) Radio status (2x) Kensington security slot Reset button POWER Supported power sources: 802.3af (Po E) or 802.3at (Po E+) on uplink Ethernet port Note: When using Po E, the USB (Universal Serial Bus) port will be enabled only when an 802.3at-compliant source is used 12 volts from external power adapter (sold separately) Maximum power consumption: Without USB (Universal Serial Bus) device connected: 12.5 watts With USB (Universal Serial Bus) device: 15 watts ...

ADVANCED FEATURES Client Match technology eliminates sticky clients by continuously gathering session performance metrics & utilizing this data to steer mobile devices to the best AP & radio, even as users roam & RF conditions change. Adaptive Radio Management (ARM) technology automatically assigns channel & power settings, provides airtime fairness, auto-corrects Wi-Fi coverage holes, & ensures that APs stay clear of RF interference. Zero-touch provisioning as well as inventory management with the cloud-based Aruba Activate service. Security With an Open DNS service subscription, Aruba Instant delivers integrated web filtering, malware & botnet protection to every device connected to the WLAN Integrated Trusted Platform Module (TPM) for secure storage of credentials & keys Secure Jack-capable for secure tunneling of wired Ethernet traffic VPN configuration functionality enables the Instant AP to create a single VPN tunnel to an Aruba Mobility Controller in the data center. The Mobility Controller acts solely as a VPN end-point & does not supply the Instant AP with any configuration. Secure Jack-capable for secure tunneling of wired Ethernet traffic. OPERATING MODES Wireless Aruba Instant AP Mobility Controller-managed WLAN AP or RAP Air monitor Hybrid WLAN AP & air monitor Secure enterprise mesh Wired 10/100/1000BASE-T Ethernet uplink port, four 10/100/1000BASE-T Ethernet local ports Two local Ethernet ports are Po E capable (product option) User authentication: 802.1X, captive portal, MAC authentication or open access Policy-based forwarding for local resource access WIRELESS RADIO SPECIFICATIONS AP type: Dual radio, dual-band 802.11n indoor Software-configurable dual radio supports 2.4 GHz & 5 GHz 2x 2 MIMO with two spatial streams & up to 300 Mbps wireless data rate in 2.4 GHz 3x 3 MIMO with three spatial streams & up to 450 Mbps wireless data rate in 5 GHz Supported frequency bands (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz Available channels: Dependent on configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n (2.4 GHz): OFDM, 2x 2 MIMO with two spatial streams 802.11n (5 GHz): OFDM, 3x 3 MIMO with three spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM Transmit power: Configurable in increments of 0.5 d Bm Maximum (conducted) transmit power (per radio transmit chain): 2.4-GHz band: +18 d Bm 5-GHz band: +18 d Bm Transmit power will be limited as needed to comply with local regulatory requirements Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks Maximum ratio combining (MRC) for enhanced receiver performance Cyclic delay/shift diversity (CDD/CSD) for enhanced downlink RF performance Short guard interval for 20-MHz & 40-MHz channels Space-time block coding (STBC) for increased range & enhanced reception Low-density parity check (LDPC) for high-efficiency error correction & increased throughput Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n (2.4 GHz): 6.5 to 300 (MCS0 to MCS15) 802.11n (5 GHz): 6.5 to 450 (MCS0 to MCS23) 802.11n high-throughput (HT) support: HT 20/40 802.11n packet aggregation: A-MPDU, A-MSDU ...

- Device Type: Radio access point
-

Width: 6.4cm
-

Depth: 10.9cm
-










...

Aruba SFP+
- 1 LC 10 G Base-LRM Network
- For Data Networking, Optical Network
- Optical Fiber
- Multi-mode
- 10 Gigabit




...

Network cable RJ-45 (M) to DB-9 (F) For Flex Network 5510 24, 5510 48; HPE Aruba 2530, 2930M 24, 2930M 48, 3810M 24, 3810M 48, 8325 ...

- Device Type: Power supply
- hot-plug / redundant
- Input Voltage: AC 100-240 V
- Output Voltage: 12 V
- Power Capacity:



...

Designed For Aruba 3810M, 3810M 16SFP+ 2-slot Switch, 3810M 24G Po E+ 1-slot Switch, 3810M 48G Po E+ 1-slot Switch ...

Designed For Aruba 3810M, 3810M 16SFP+ 2-slot Switch, 3810M 24G Po E+ 1-slot Switch, 3810M 48G Po E+ 1-slot Switch ...