Aruba Rap-109 Access Point

Product Description

ADVANCED FEATURES Client Match technology eliminates sticky clients by continuously gathering session performance metrics & utilizing this data to steer mobile devices to the best AP & radio, even as users roam & RF conditions change. ARM technology delivers best-in-class RF management, including automatic transmit power & channel control with auto coverage-hole correction. Zero-touch provisioning as well as automated firmware upgrades & inventory management with the cloud-based Aruba Activate service. Spectrum analyzer remotely scans the 2.4-GHz & 5-GHz radio bands to identify sources of RF interference. Security With an Open DNS service subscription, Aruba Instant RAPs delivers integrated web filtering, malware & botnet protection to every device connected to the WLAN Integrated Trusted Platform Module (TPM) for secure storage of credentials & keys Secure Jack-capable for secure tunneling of wired Ethernet traffic VPN configuration functionality enables the Instant AP to create a single VPN tunnel to an Aruba Mobility Controller in the data center. The Mobility Controller acts solely as a VPN end-point & does not supply the Instant AP with any configuration. WIRELESS RADIO SPECIFICATIONS AP type: Dual radio, dual-band 802.11n indoor Software-configurable dual radio supports 2.4 GHz & 5 GHz 2x 2 MIMO with two spatial streams & up to 300 Mbps wireless data rate per radio Supported frequency bands (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.875 GHz Available channels: Managed by Aruba Instant or Mobility Controller, depending upon the configured regulatory domain Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n: 2x 2 MIMO with two spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM Transmit power: Configurable in increments of 0.5 d Bm Maximum (aggregate) transmit power (limited by local regulatory requirements): 2.4-GHz band: +21 d Bm 5-GHz band: +21 d Bm Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for enhanced receiver performance Cyclic delay diversity (CDD) for enhanced downlink RF performance Short guard interval for 20-MHz & 40-MHz channels Space-Time Block Coding (STBC) for increased range & enhanced reception Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15) 802.11n high-throughput (HT) support: HT 20/40 802.11n packet aggregation: A-MPDU, A-MSDU INTERFACES Network: ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed & MDI/MDX ENET1-4 (local): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed & MDI/MDX One port for DC power connector One USB (Universal Serial Bus) 2.0 port (Type A connector) One serial console interface (RJ-45) Visual indicators (LEDs): Power/system status Ethernet link status (2x) Radio status (2x) Kensington security slot Reset button POWER Supported power sources: 802.3af (Po E) or 802.3at (Po E+) on uplink Ethernet port Note: When using Po E, the USB (Universal Serial Bus) port will be enabled only when an 802.3at-compliant source is used 12 volts from external power adapter (sold separately) Maximum power consumption: Without USB (Universal Serial Bus) device connected: 12.5 watts With USB (Universal Serial Bus) device: 15 watts