The Phanteks Eclipse P500 Air Tempered Glass Mid Tower Case features high airflow & style. It features a mesh front panel for optimal airflow with effective dust filtration. The P500A offers a versatile interior with high-end features such as extensive water-cooling support (up to 420 mm radiators), extensive storage possibilities (can be upgraded up to 10 HDD’s / 13 SSD’s), hinged tempered glass side panel, & dual-system support. Key

Features: Plenty of airflow & dust filtration Room for all your components Tempered glass side panel Dual system compatible with upgrade kit & Revolt X power supply Technical Specifications Dimension: 240 mm x 510 mm x 505 mm 9.45 in x 20.1 in x 20.0 in Form Factor: Midtower

Materials: Steel chassis Motherboard Support: ATX, Micro ATX, Mini ITX, E-ATX * (up to 280mm wide) Front I/O USB (Universal Serial Bus)-C GEN 2 2x USB (Universal Serial Bus) 3.0 Microphone/ Headphone Reset Button Power Button



...

The Eclipse P600S is designed to bring you the best of two worlds. A hybrid forged between silent & high-performance chassis. Find the optimal configuration in any situation by switching between quiet or performance mode. Designed with effective soundproofing panels & Phanteks’ new high airflow fabric, the Eclipse P600S offers the full potential of two opposites, minimum noise & maximum airflow. Main Features Superbly designed & crafted Midi-Tower supporting motherboards up to E-ATX Supports a dual-system with the help of an optional bracket Tempered glass side door for easy access Integrated insulating material, removable for enhanced airflow if preferred 3x 140 mm fans pre-installed, total of 6x 140 mm & 7x 120 mm fans possible Radiators up to 420 mm compatible Supports GPUs up to 435 mm long, vertical installation optional, CPU coolers up to 190 mm 4x 3, 5- & 3x 2, 5" slots I/O Panel with 1x USB (Universal Serial Bus) 3.1 Type C- & 2x USB (Universal Serial Bus) 3.0 Type A ...

The Enthoo 719 from PHANTEKS is a huge PC case for enthusiasts. It is designed for large SSI-EEB & E-ATX motherboards. The Full-Tower offers the possibility of customising the cases interior to meet your personal requirements, even enabling users to install two power supplies or two complete systems under one roof. There are also multiple options when it comes to installing a range of water cooling gear along with two vertically-mounted graphics cards. In short: the Enthoo 719 is ready for anything you care to throw at it. The Features of the PHANTEKS ENTHOO 719 at a Glance: superb build quality, Full-ATX design supporting motherboards up to SSI-EEB & E-ATX Supports dual systems with the help of the included brackets Tempered glass side door for quick & easy access Total of 8x 140- or 15x 120 mm fans possible Radiators: max. 2x 480 mm, 2x 360 mm & 1x 140 mm Graphics cards up to 503 mm, vertical installation possible, CPU coolers up to 195 mm 4x 3, 5- & 11x 2, 5" slots, up to 12x 3, 5" slots possible I/O Panel with 1x USB (Universal Serial Bus) 3.1 Type-C- & 4x USB (Universal Serial Bus) 3.0 Type-A Enthoo 719: Full-Tower with Multiple Customisation Options The cases exterior resembles, at first glance, its predecessor the Enthoo Luxe from PHANTEKS. This Full-Tower case has been completely overhauled however, this time offering an ingeniously designed interior boasting a black powder coating & an array of user-friendly touches: the bottom of the case

Includes:: a vertical PSU shroud, upon which either a second Mini-ITX format system or a second power supply can be installed. Both brackets for this functionality come included as standard. The PHANTEKS Enthoo 719 supports SSI-EEB-, E-ATX-, ATX-, Micro-ATX- & Mini-ITX-format motherboards. Apart from the eight PCI slot brackets, the case also offers support for two vertical triple-slot PCI slots, meaning that graphics cards can be up to 503 mm in length while the tempered glass side means that you can enjoy the view from the outside. A vertical GPU bracket comes included. The case

Includes:: various rubberised cable ducts with velcro loops & extra coverings to enable users to benefit from extensive cable management options when it comes to achieving that clean & minimalist look. Note: A compatible riser cable for the vertical mounting/installation of graphics cards is not included & may be purchased separately in our online shop. Options for Air- & Water cooling The Enthoo 719 is designed from the ground up for custom water cooling: the front supports a radiator in the 480- or 420-mm format. The fans are attached to the outside of the chassis, meaning that space on the inside is maximised. The roof supports 360- or 280 mm radiators with a total thickness of 55 mm before interfering with the top of the motherboard. The rear of the case supports a single 140- or 120 mm model fan. A radiator up to 480 mm can fit onto the motherboard tray. The right side wall offers multiple openings to help improve overall airflow. The bottom of the case on the other hand supports a 360 mm radiator. The roof & the front of the case include openings for fill- & drain ports each with a diameter of 20, 5 mm. PHANTEKS has also taken traditional air cooling into consideration, enabling the installation of up to x 15 120 mm fans. The front has space for four 120- or three 140 mm models, while the rear & roof supports 140- or 120 mm case fans. The motherboard tray supports four 120 mm fans & the bottom of the case allows for three 120- or 140 mm fans. CPU coolers may be up to 195 mm tall. Fan Hub & RGB-LED Lighting PHANTEKS has thoughtfully included fan controls for up to eight fans in the Enthoo 719. Three 3-pin fans can be controlled via the speed signal & four 4-pin PWM fans using the PWM. An additional 4-pin connector is designed for both control options. Splitter cables, available to purchase separately, allow for even more fans to be connected to the hub. The PHANTEKS Enthoo 719

Includes:: integrated RGB-LED lighting in the front cover as well as in the PSU shroud. Colour & lighting modes can be selected using the buttons on the I/O panel of the Full-Tower case & synchronised with other digitally addressable accessories via 3-pin RGB cable. The 719 is compatible with ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync & Razer Chroma. Operation & Connectivity Options The power button of the PHANTEKS Enthoo 719 is embedded in the roof of the case, while the modular I/O panel is situated on the front. The front cover

Includes:: four USB (Universal Serial Bus) 3.0 ports, one USB (Universal Serial Bus) 3.1 Type C connector, a microphone input & a headphone jack. There are three additional buttons, two for adjusting the colour & modes of the RGB lighting & the third which can act either as a reset button & HDD-LED indicator which is surrounded by a white LED or alternatively as a power switch & power LED for the subsidiary system. Drives: Hard Drives & SSDs A Full-Tower case like the Enthoo 719 is more than capable of fitting a wide array of drives: by default, the case supports eleven 2, 5" drives behind the motherboard tray. A small side window in the right side allows users to enjoy an unobstructed view of their installed SSDs. There are an additional four double trays each capable of holding two SSDs in the front, these can be installed instead of a radiator on the motherboard tray. The Enthoo 719 supports four modular, stackable drive cages for 3, 5" drives. In total, up to ten of said cages can be installed in the case.







...

Designed based on the EVOLV line, the Enthoo EVOLV ATX Tempered Glass Edition combines sandblasted aluminum with tempered glass panels. System builders & watercooling enthusiasts can now present their build with a premium touch. The EVOLV ATX Tempered Glass Edition is equipped with innovative features, amazing (water)cooling potential, & RGB illumination. Case Specifications Dimension 230 mm x 495 mm x 510 mm (W x H x D) Form Factor Full Tower Material (s) Aluminum (3mm), Tempered Glass, Steel chassis Motherboard support: EATX up to 264mm, ATX, Micro ATX, Mini ATX Front I/O 2x USB (Universal Serial Bus) 3.0, Mic, Headphone, RGB LED control Side window Yes Expansion slots 7 Internal 3.5” 5 2x extra upgrade slot) Internal 2.5” 2 1x extra upgrade PH-F140SP (included) Speed (rpm) 1200 ±250 rpm Max Airflow 82.1 CFM Static Pressure 1.33mm H2O Acoustical Noise 19d B Clearance Graphic card 420 mm (16.54 in) No HDD brackets 300 mm (11.8 in) HDD brackets installed CPU cooler 194 mm (7.6 in) Cable Management 3.5cm (1.38 in) Memory Clearance 120 mm form factor: 68 mm (2.68 in) (motherboard
- fan) 140 mm form factor: 48 mm (1.89 in) Warranty: 5 Years Cooling 120mm Fan 140mm Fan Front 3x 2x (2x included) Top 3x 2x Rear 1x 1x (1x included) Liquid Cooling 120mm Radiator 140mm Radiator Front Up to 360 Up to 280 Top Up to 360 Up to 280 Rear 120 140
...

Designed based on the EVOLV line, the Enthoo EVOLV ATX Tempered Glass Edition combines sandblasted aluminum with tempered glass panels. System builders & watercooling enthusiasts can now present their build with a premium touch. The EVOLV ATX Tempered Glass Edition is equipped with innovative features, amazing (water)cooling potential, & RGB illumination. Case Specifications Dimension 230 mm x 495 mm x 510 mm (W x H x D) Form Factor Full Tower Material (s) Aluminum (3mm), Tempered Glass, Steel chassis Motherboard support: EATX up to 264mm, ATX, Micro ATX, Mini ATX Front I/O 2x USB (Universal Serial Bus) 3.0, Mic, Headphone, RGB LED control Side window Yes Expansion slots 7 Internal 3.5” 5 2x extra upgrade slot) Internal 2.5” 2 1x extra upgrade PH-F140SP (included) Speed (rpm) 1200 ±250 rpm Max Airflow 82.1 CFM Static Pressure 1.33mm H2O Acoustical Noise 19d B Clearance Graphic card 420 mm (16.54 in) No HDD brackets 300 mm (11.8 in) HDD brackets installed CPU cooler 194 mm (7.6 in) Cable Management 3.5cm (1.38 in) Memory Clearance 120 mm form factor: 68 mm (2.68 in) (motherboard
- fan) 140 mm form factor: 48 mm (1.89 in) Warranty: 5 Years Cooling 120mm Fan 140mm Fan Front 3x 2x (2x included) Top 3x 2x Rear 1x 1x (1x included) Liquid Cooling 120mm Radiator 140mm Radiator Front Up to 360 Up to 280 Top Up to 360 Up to 280 Rear 120 140
...

Features Enthoo Evolv

Includes:: 1 x 140mm fan in front & 1 x 140mm fan in the rear. Ability to upgrade to

...

Features Enthoo Evolv

Includes:: 1 x 140mm fan in front & 1 x 140mm fan in the rear. Ability to upgrade to

...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

The craftsmanship of the Evolv Shift can be seen in every detail. From efficient space utilization to innovative features, the Shift delivers a compact housing that packs plenty of power. Every aspect of the Shift has been thoughtfully designed to be intuitive, clean & accessible. The interior is designed to meet the demand of AIO water cooling. Due to its small footprint & versatile placement, the Shift will look impressive anywhere in your home environment or office space. Case Specifications Dimension 170 mm x 470 mm x 274 mm Form Factor Small Form Factor Materials Anodized aluminium panels, Powder coated steel chassis, Tempered glass side panels MB Support Mini ITX PSU Support SFX Front I/O 2x USB (Universal Serial Bus) 3.0, Power Button, RGB Button PCI slots 2 3.5” HDD 1x 2.5” SSD 2x Clearance Graphic card length 350 mm CPU cooler 82 mm Bottom Radiator 55 mm Warranty 5 Years Included Accessories Premium fan 140 mm 1x GPU bracket 1x PCI-e x 16 Risercable 1x 2.5” SSD bracket 2x 120mm Fan 140mm Fan Front 2x 2x (1x Included) Bottom 1x 1x 120mm Radiator 140mm Radiator Front 120
- Bottom 120 -
...

The craftsmanship of the Evolv Shift can be seen in every detail. From efficient space utilization to innovative features, the Shift delivers a compact housing that packs plenty of power. Every aspect of the Shift has been thoughtfully designed to be intuitive, clean & accessible. The interior is designed to meet the demand of AIO water cooling. Due to its small footprint & versatile placement, the Shift will look impressive anywhere in your home environment or office space. Case Specifications Dimension 170 mm x 470 mm x 274 mm Form Factor Small Form Factor Materials Anodized aluminium panels, Powder coated steel chassis, Tempered glass side panels MB Support Mini ITX PSU Support SFX Front I/O 2x USB (Universal Serial Bus) 3.0, Power Button, RGB Button PCI slots 2 3.5” HDD 1x 2.5” SSD 2x Clearance Graphic card length 350 mm CPU cooler 82 mm Bottom Radiator 55 mm Warranty 5 Years Included Accessories Premium fan 140 mm 1x GPU bracket 1x PCI-e x 16 Risercable 1x 2.5” SSD bracket 2x 120mm Fan 140mm Fan Front 2x 2x (1x Included) Bottom 1x 1x 120mm Radiator 140mm Radiator Front 120
- Bottom 120 -
...