The bar has been set to a new standard with Phanteks’ release of their first Enthoo Series case. Passionate about cooling & the one that brought you the world’s best air coolers, Phanteks enters the chassis arena with their functional design with exceptional cooling possibilities, the Enthoo Primo. Case Specifications Dimension: 250 mm x 650 mm x 600 mm (W x H x D) Form Factor: Full tower Material (s): Aluminum faceplates, Steel chassis Motherboard support: ATX, EATX, m ATX, SSI EEB Weight: 17.9kg Front: I/O 2x USB (Universal Serial Bus) 3.0, 2x USB (Universal Serial Bus) 2.0, Mic, Headphone, LED ON/OFF switch, Power Reset Side window: Yes, split-window design Expansion slots: 8 Power supply slots: 2 External 5.25”: 5 Internal 3.5”: 6 (2x 3HDD cages) Internal 2.5”: 12 (2x 3HDD cages + 2x doublestack SSD brackets) (expandable to 3x) Speed (rpm): 1200 ± 250 rpm Max Airflow: 82.1 CFM Static Pressure: 1.33mm H2O Acoustical Noise: 19 d B Warranty: 5 Years Clearance Graphic card: 257 mm (reservoir bracket installed) 277 mm (reservoir bracket installed w/o cover) 350 mm (no reservoir bracket) 390 mm (HDD cages in front position) 515 mm (no HDD cages) CPU cooler: 207 mm Cable management: 30 mm Cooling 120mm Fan 140mm Fan Front 2x 2x (2x included with LED) Top 4x 3x (1x included) Side 2x 2x Rear (top) 1x 1x (1x included) Rear (bottom) 1x 1x Bottom 4x 2x (1x included) HDD 2x
- Liquid Cooling 120mm Radiator 140mm Radiator Front Up to 240
- Top Up to 480 Up to 420 Side (w/out HDD cages) Up to 240
- Rear 120 140 Bottom Up to 480 Up to 280


...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px
...

Features Enthoo Pro M

Includes:: 2 x 140mm fans. Ability to upgrade to additional fans is possible. All fans

...

The ENTHOO PRO M focuses on delivering great design without compromising price. Water-cooling builds will be a simple task with the help of our innovative radiator bracket & pump mounting locations. Whether you are a system builder or water-cooling enthusiast, the PRO M will give you unlimited possibilities. Features Enthoo Pro M

Includes:: 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks new redesigned & better performing premium fans. Appearance Brushed aluminum look Clean interior
- Hidden PSU & HDDs Case Specifications Dimension: 235 mm x 480 mm x 500 mm (W x H x D) Form Factor: Mid tower Material (s): Plastic Steel Motherboard support: E-ATX * (limited to 264mm wide), ATX, Micro ATX, Mini ATX Front: 2x USB (Universal Serial Bus) 3.0, Mic, Headphone, Reset Side window: Yes Expansion slots: 7 Internal 3.5”: 8 (2x Included) Internal 2.5”: 7 (1x included) PH-F140SP (included) Speed (rpm) 1200 ±250 rpm Max Airflow 82.1 CFM Static Pressure 1.33mm H2O Acoustical Noise 19d B Clearance Graphic card 420 mm (16.54 in) No HDD brackets 300 mm (11.8 in) HDD brackets installed CPU cooler 194 mm (7.6 in) Cable Management 3.5cm (1.38 in) Memory Clearance 120 mm form factor: 68 mm (2.68 in) (motherboard
- fan) 140 mm form factor: 48 mm (1.89 in) PSU (including cable) 318 mm (12.5 in) Warranty 5 Years Cooling 120mm Fan 140mm Fan Front 2x (3x w/o ODD) 2x Top 3x 2x Rear 1x 1x (1x included) Liquid Cooling 120mm Radiator 140mm Radiator Front Up to 360 Up to 280 Top Up to 360 Up to 280 Rear 120 140



...

Beautifully crafted & engineered to maximize cooling potential with its amazing expansion flexibility, the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has multiple radiator support, removable ssd bracket, closed HDD panel, & velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo. Features Enthoo Pro

Includes:: 1 x 200mm fan in front & 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks new redesigned & better performing premium fans. Budget friendly case, Phanteks Enthoo Pro, unleash unlimited possibilities. Appearance Brushed plastic with an aluminum appearance Stealth interior: hidden PSU* / hidden HDD Case Specifications Dimension: 235 mm x 535 mm x 550 mm (W x H x D) Form Factor: Full tower Material (s): Brushed plastic, Steel chassis Motherboard support: ATX, EATX, m ATX, SSI EEB Front: I/O 2x USB (Universal Serial Bus) 3.0, 2x USB (Universal Serial Bus) 2.0, Mic, Headphone Side window: Yes, split-window design Expansion slots: 8 External 5.25”: 3 Internal 3.5”: 6 (2x 3HDD cages) Internal 2.5”: 7 (1x SSD Brackets) PH-F140SP (included) Speed (rpm) 1200 ± 250 rpm Max Airflow 82.1 CFM Static Pressure 1.33mm H2O Acoustical Noise 19 d B PH-F200SP (included) Speed (rpm) 850 ±250 rpm Max Airflow 110.1 CFM Static Pressure 1.04mm H2O Acoustical Noise 25d B Clearance: Graphic card: 347 mm Without HDD cages: 472 mm CPU cooler: 193 mm Cable management: 27 mm (39mm at PSU area) Radiator Clearance: 65mm to motherboard Warranty: 5 Years Cooling 120mm Fan 140mm Fan 200mm Front 2x 2x 1x (included) Top 3x 3x 1x Rear 1x 1x (1x included)
- Bottom 2x 1x
- HDD 2x
-
- Liquid Cooling 120mm Radiator 140mm Radiator Front Up to 240
- Top Up to 360 Up to 420 Rear 120 140 Bottom Up to 240 140






...

Big on features & small in size, the EVOLV ITX is a budget oriented chassis that uses a metal exterior, complemented with a tempered glass side panel. The case introduces innovative features for a convenient installation experience in an ITX enclosure, such as a unique bracket solution for mounting a radiator on top & a multifunctional bracket for reservoir, pump, & SSD/HDD. Available in Black, Black/ Red & White. Case Specifications Dimension 230 mm x 375 mm x 395 mm (W x H x D) Form Factor Mini ITX Tower Material (s) Steel Plates, Plastics, Steel chassis Motherboard support Mini ITX Front I/O 2x USB (Universal Serial Bus) 3.0, Mic, Headphone, RGB switch Side window Yes, Tempered glass PCI slots 2 Internal 3.5” 2x (1x extra upgrade slot) Internal 2.5” 1x (1x extra upgrade slot) Clearance Graphic card length 330 mm CPU cooler 200 mm Cable Management 28mm Motherboard
- Radiator 120 mm form factor: 70 mm 140 mm form factor: 50 Warranty 5 Years PH-F140 Premium Fan (1x included) Speed (rpm) 500-1600 ±250 rpm Max Airflow 68.1 CFM Static Pressure 1.62 mm H2O Acoustical Noise 17-25.3 d B (A) Cooling 120mm Fan 140mm Fan 200mm Front 2x 2x 1x Top 2x 2x
- Rear 1x (1x Included) 1x
- Liquid Cooling 120mm Radiator 140mm Radiator Front Up to 240
- Top Up to 240 Up to 280 Rear 120 140



...

The Enthoo Evolv Shift Air combines the striking design of the Evolv series with new, innovative features such as optimised airflow in an attractive Mini-ITX form factor case. The Evolv Shift Air keeps a remarkably small footprint, yet thanks to its clever layout, remains more than capable of supporting high-end gaming hardware. The Shift Air can also be set in a different orientation, & this is then combined with the attractive use of aluminium & fine mesh surfaces to make it an attractive feature of any living room or home cinema setup. Specially developed by PHANTEKS, the mesh fabric covers extend across much of this stylish case, meaning that all your gaming hardware is kept supplied with cool, fresh air. The mesh surfaces also double up as dust filters. Features Striking design with aluminium & fine mesh fabric Perfect case for stylish living room PCs Graphics cards up to 35 cm long GPU bracket can be rotated Supports various RGB-LED controllers Can be set vertically or horizontally Premium PC Case for the Living Room The Enthoo Evolv Shift Air offers space for gaming graphics cards up to 35cm in length &, according to PHANTEKS, the case has been specially designed with the use of two Ai O water coolers in mind, where the radiators are 120 mm in size. With its aluminium & mesh surfaces, the Mini-ITX case fits seamlessly into any designer living room. Furthermore, it can be set vertically or horizontally
- meaning it can easily pass for a Hi Fi system. Fresh, cool air can be pulled in through the mesh coverings on the case, while the mesh itself is so tightly woven that it also acts as a dust filter. The graphics card is mounted with the assistance of the included PCIe x 16 riser cable, meaning that either the backplate or the GPU cooler can be seen from the outside depending on your preference. The Mini-ITX motherboard is mounted in parallel to the graphics card with the back panel facing upwards. The ports on the I/O panel as well as the graphics card are cleverly concealed beneath a cover, & this has the added benefit of concealing much of the cabling which is then guided through an opening & on into the back of the case. Cooling, Storage & Additional Features A pre-installed 140 mm fan in the Evolv Shift Air pushes warm air from the front & side panels out of the case, while the air inlets in the roof also contribute to the cases overall excellent cooling. A 3, 5"- or 2, 5" SSD can be installed at the back & two further SSDs can be installed in the front with the help of the bundled SSD brackets
- at the expense of the 140 mm fans of course. The rear panel on which the SSD/HDD is mounted can be removed to make hardware installation even easier. The I/O panel of the Mini-ITX case is located to the left side on the back of the case & offers two USB (Universal Serial Bus) 3.0 ports for gaming peripherals or external USB (Universal Serial Bus) hard drives & USB (Universal Serial Bus) sticks. In order to put your hard-earned hardware on show in the best possible light, the case

Includes:: an RGB controller that can be controlled at the touch of a button. As we have come to expect from PHANTEKS, there are multiple points within the case that include velcro loops for cable management as well as rubberised cable pass-throughs. The bottom & top of the case, as well as the air inlets on the aluminium covers to the rear, all include additional dust filters that help keep your system looking & running its best. Technical

Details: Dimensions: 186 x 470 x 274 mm (W x H x D)

Material: Steel, aluminium, mesh fabric

Colour: Black Form factor: Mini-ITX Total possible fans: 2x 140/120 mm (front) 1x 140/120 mm (bottom) Pre-installed: 1x 140 mm (front) Radiator Mountings (partially forfeits HDD- and/or fan slots): 1x max. 120 x 27 mm (front) 1x max. 120x 27 mm (bottom) Filter: Front, rear, bottom (removable) Drive bays: 1x 3, 5" (internal, if no radiator is installed) 3x 2, 5" (internal, 2 SSD brackets included, additional brackets can be purchased separately) PSU: 1x SFX or SFX-L (optional) Expansion slots: 2 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x RGB switch Max GPU length: 350 mm Max CPU cooler

Height: 82 mm Max PSU length: 145 mm Guarantee: 5 Years











...

The Phanteks Halos Digital RGB fan frames complements & premium system build with ambient illumination. Using high density LEDs that are individually addressable, allows for more patterns and colour modes with smooth transitions. Illuminate your performance fans with the Halos Digital fan frames & bring style to your system without compromising performance. Illuminate any 120/140mm fan The Halos Digital RGB fan frame is developed to illuminate fan blades from different varieties of material/colour with a bright ambient glow. This means even high performance fans made from PBT material, like Phanteks MP & SP fans, can now be illuminate in any colour. With the Halos theres no more compromise on performance when RGB illuminated fans are desired. High Density LED Using 30x LEDs per frame, the Halos Digital RGB fan frame is designed with high density LEDs & a diffuser to spread light brightly & evenly for the best ambient effect on your fan & case interior. RGB Sync + Easy Cable Routing Daisy chain all of Phanteks DRGB products together & sync the DRGB lighting with any DRGB equipment Phanteks case or motherboard. The Halos Digital RGB can be controlled with Phanteks Digital RGB Controller or a compatible motherboard using the Phanteks DRGB Motherboard adapter. Mounting Screws Included The Halos Digital RGB fan frames can be mounted directly to & standard 120/140mm fan with the included fan screws or UNC 6-32 radiator screws. ...

Phanteks stands for innovation, quality & distinctiveness. Phanteks embarked on this mission with their fantastic cases, coolers & fans. The Halos Lux represents Phanteks taking the next step in terms of innovation by offering RGB illuminated frames for upgrading fans. This enables even standard RGB-less fans to look great without compromising on performance. THE PHANTEKS HALOS LUX AT A GLANCE Innovative frame for 140 mm fans Powerful RGB lighting with 21 LED diodes Manufactured from robust, premium aluminium Compatible with Phanteks cases, Mystic Light, Aura Sync & RGB Fusion RETROFITTING IMPRESSIVE RGB LIGHTING The premium Phanteks Halos Lux are fan frames with RGB lighting which can be mounted to standard 140 mm fans. Manufactured in robust, anodised, black aluminium, even without lighting they have an incredible look. With the 21 integrated RGB diodes they allow any gaming PC to be quickly & easily supplemented with an impressive lighting upgrade. The Halos Lux can be controlled through Phanteks integrated RGB controls. The bundled RGB-LED adapter can also be integrated with the motherboard, offering support for MSI Mystic Light, ASUS Aura Sync & Gigabyte RGB Fusion. A diffuser ensures a bright & even distribution of light to allow your case & fans to achieve the best possible lighting. Especially exciting is the possibility to daisy-chain several Phanteks RGB products together. The Halos Lux can also be integrated into such a setup. Technical

Details: Dimensions: 140 x 140 x 6 mm (W x H x D) Weight: 90 g

Material: Anodised aluminium

Colour: Gunmetal Grey LED Lighting: RGB, 21 diodes Guarantee: 2 Years Bundle: Halos Lux 140 mm frame RGB-LED Adapter 4x Fan Screws 4x UNC 6-32 Radiator Screws





...

The high performance Phanteks RGB LED strip features ultra high brightness LEDs & incorporate a number of unique features that ensure long-lasting, bright & even illumination. If you are looking to add to your existing LED strips in your Phanteks case you can purchase the PH-LEDKT_M4, which

Includes:: 1x 400mm magnetic LED strip & 3M adhesive tape. The single 400mm LED strip can also connect directly to your Phanteks case that has the LED connector function (please check Phanteks website for compatible cases). High-Brightness LED Chip
- Our Phanteks RGB LED strips are extremely bright & it is a great addition to any case for interior lighting.
- Magnetic with 3M stickers included: Phanteks RGB LED strips have integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For aluminium chassis, our LED strips include double-side 3M tape.
- Flexible & Better Cable Management: With our 1 orientation connector, the color channels are always in the right position. The RGB LED strip is also chainable & can be expanded by adding more light strips.
- Efficient, Low Profile & Long-lasting: The strip is made from flexible PCB material & comes with a silicone housing which is more durable compared to commonly used Epoxy strips. They will not dry up or crack over time. Long lasting & waterproof..





...